SHOW:
|
|
- or go back to the newest paste.
| 1 | install all programs and decoders, remember to find a nice place for madVR to be extracted to where it wont get deleted *note only install madVR if you have a good dedicated card | |
| 2 | open MPC-HC check store settings to .ini file | |
| 3 | close mpc-hc | |
| 4 | copy the .ini to C:\Program Files (x86)\Media Player Classic - Home Cinema\ and overwrite the file that is there | |
| 5 | ||
| 6 | start up MPC-HC and play a file known to have video, audio, and subs *you can use the sample video provided | |
| 7 | click into the files let it seek there then pause | |
| 8 | right click the video and go to filters, madVR, LAV video decoder, DirectVovSub, Lav audio decoder, and LAV Splitter Source | |
| 9 | if everything is there your good to start changing the settings | |
| 10 | ||
| 11 | if your outputting your audio to a surround receiver: | |
| 12 | right click the video and go to filters, click LAV Audio Decoder | |
| 13 | under output formats uncheck both 32bit optins unless your audio card somehow supports it | |
| 14 | under bitstreaming check all formats that your receiver supports | |
| 15 | under options | |
| 16 | check expand mono to stereo and expand 6.1 to 7.1 | |
| 17 | under the mixing tab make sure enable mixing is unchecked and all seetings are unchecked or set to none | |
| 18 | click apply then ok at the bottom | |
| 19 | ||
| 20 | if your outputting audio directly to speakers: | |
| 21 | right click the video and go to filters, click LAV Audio Decoder | |
| 22 | under output formats uncheck both 32bit optins unless your audio card somehow supports it | |
| 23 | under bitstreaming make sure nothing is checked | |
| 24 | under options makesure expand mono to stereo and expand 6.1 to 7.1 are unchecked | |
| 25 | under the mixing tab | |
| 26 | under mixer enable mixing and select speaker config | |
| 27 | under settings check dont mix stereo sources and uncheck normalize matrix and clipping protection | |
| 28 | under matrix encoding select none | |
| 29 | click apply then ok at the bottom | |
| 30 | ||
| 31 | if you have a dedicated GPU: | |
| 32 | right click the video and go to filters, click madvr, then Edit Settings | |
| 33 | click and expand devices then click your device | |
| 34 | set the device type | |
| 35 | expand your device and set the display mode *if you dont know what display mode you should set contact me | |
| 36 | click and expand processing | |
| 37 | turn of all decoding and deinterlacing | |
| 38 | click and expand scaling algorithems | |
| 39 | click luma upscaling and set it to spline | |
| 40 | click luma downscaling and set it to spline | |
| 41 | click and expand rendering and click general setings | |
| 42 | check disable desktop composition and uncheck only in fullscreen | |
| 43 | hit apply the ok at the bottom then ok and the window that is still on screen | |
| 44 | *if you have problems with preformance its probably because you dont have a powerful enough GPU contact me for help adjusting or try disabling madVR | |
| 45 | ||
| 46 | if you dont have a dedicated GPU: | |
| 47 | in MPC-HC click view>options | |
| 48 | select external filters | |
| 49 | click madVR and select block on the right hand side | |
| 50 | select Playback>Output | |
| 51 | under DirectShow Video select Enhanced Video Renderer | |
| 52 | click apply then ok at the bottom | |
| 53 | ||
| 54 | if you have a Nvidia GPU capable of CUDA: | |
| 55 | right click the video and go to filters, click LAV Video decoder | |
| 56 | under hardware acceleration, gardware decoder change to CUVID | |
| 57 | under Hardware/GPU deinterlacing makesure the algorithem is set to adaptive and high-quality processing is checked as well as 50p/60p (Video) | |
| 58 | on the output formats side change RGB output levels to untouched if using madVR, if using EVR set to TV | |
| 59 | click apply then ok at the bottom | |
| 60 | *depending on your GPU you may not be able to use both madVR and CUVID, if you have problems with preformance disable madVR, if you are still having problems contact me for help | |
| 61 | ||
| 62 | if you have a ATI GPU or APU: | |
| 63 | right click the video and go to filters, click LAV Video decoder | |
| 64 | under hardware acceleration, gardware decoder change to DXVA2 (native) | |
| 65 | on the output formats side change RGB output levels to untouched if using madVR, if using EVR set to TV | |
| 66 | click apply then ok at the bottom | |
| 67 | *depending on your GPU you may not be able to use both madVR and DXVA2, if you have problems with preformance disable madVR, if you are still having problems contact me for help | |
| 68 | ||
| 69 | if you have a new intel i series CPU: | |
| 70 | right click the video and go to filters, click LAV Video decoder | |
| 71 | under hardware acceleration, gardware decoder change to Intel QuickSync | |
| 72 | on the output formats side change RGB output levels to TV | |
| 73 | click apply then ok at the bottom | |
| 74 | ||
| 75 | if you have on integrated graphics: | |
| 76 | right click the video and go to filters, click LAV Video decoder | |
| 77 | under hardware acceleration, gardware decoder change to none | |
| 78 | on the output formats side change RGB output levels to TV | |
| 79 | click apply then ok at the bottom | |
| 80 | ||
| 81 | You have now completed configuring MPC-HC close the program completely and try playing the provided video, contact me if any problems result. | |
| 82 | ||
| 83 | ||
| 84 | **NOTE: to change track in files right click, go to files, then the files path, and you should be able to select the sudio video and subs that you want |
