"LED Activation" rev_01

/********* Pleasedontcode.com **********

    Pleasedontcode thanks you for automatic code generation! Enjoy your code!

    - Terms and Conditions:
    You have a non-exclusive, revocable, worldwide, royalty-free license
    for personal and commercial use. Attribution is optional; modifications
    are allowed, but you're responsible for code maintenance. We're not
    liable for any loss or damage. For full terms,
    please visit pleasedontcode.com/termsandconditions.

    - Project: "LED Activation"
    - Source Code NOT compiled for: Arduino Nano
    - Source Code created on: 2024-05-23 14:53:10

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
    /* If the button is pressed 3 times, let the LED */
    /* light up */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <EasyButton.h>  //https://github.com/evert-arias/EasyButton

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void onSequenceMatched(void);  // Function prototype for sequence matched callback

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t Button_PushButton_PIN_D2 = 2;
const uint8_t LED_PIN = 13;  // Define the LED pin

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton button(Button_PushButton_PIN_D2);  // Initialize EasyButton object with the pin number

void onSequenceMatched()
{
  Serial.println("Button pressed 3 times");  // Callback function to be called when the button sequence is matched
  digitalWrite(LED_PIN, HIGH);  // Turn on the LED
}

void setup(void)
{
  // put your setup code here, to run once:
  Serial.begin(115200);  // Initialize serial communication at 115200 baud rate
  Serial.println();
  Serial.println(">>> EasyButton sequence example <<<");

  button.begin();  // Initialize the button
  button.onSequence(3, 2000, onSequenceMatched);  // Set up the sequence detection: 3 presses within 2000ms

  pinMode(Button_PushButton_PIN_D2, INPUT_PULLUP);  // Set the button pin as input with pull-up resistor
  pinMode(LED_PIN, OUTPUT);  // Set the LED pin as output
  digitalWrite(LED_PIN, LOW);  // Ensure the LED is off initially
}

void loop(void)
{
  // put your main code here, to run repeatedly:
  button.read();  // Read the button state
}

/* END CODE */