Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 00)
- [ 0.000000] bmem: adding 196 MB RESERVED region at 60 MB (0x0c400000@0x03c000 00)
- [ 0.000000] bmem: adding 256 MB LINUX region at 512 MB (0x10000000@0x20000000 )
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] Normal 0x00000000 -> 0x00030000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00010000
- [ 0.000000] 0: 0x00020000 -> 0x00030000
- [ 0.000000] On node 0 totalpages: 131072
- [ 0.000000] Normal zone: 1536 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 129536 pages, LIFO batch:31
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 129536
- [ 0.000000] Kernel command line: root=/dev/mtdblock3 lginit=/dev/mtdblock4 ro loglevel=0 rootfstype=squashfs appxip_addr=0x2600000 xipfs=22 mem=316M bmem=196 M autorun usbpwr lcdmodules lock_time=0 panic=0 lpj=201728 bcmrac=3 migration _cost=1000 bver=1.02.20 start_kernel=2186
- [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
- [ 0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
- [ 0.000000] Memory: 291588k/524288k available (3643k kernel code, 232240k res erved, 523k data, 152k init, 0k highmem)
- [ 0.000000] NR_IRQS:128
- [ 0.000000] Measuring MIPS counter frequency...
- [ 0.000000] Detected MIPS clock frequency: 405 MHz (202.504 MHz counter)
- [ 0.000000] Clockevent init: mips_hpt_frequency=202504100, mips_freq=20247597 5 (compensation=-12)
- [ 0.000000] Clockevent init: Set mips_hpt_frequency to 202475975
- [ 0.000000] Calibrating delay loop (skipped) preset value.. 403.45 BogoMIPS ( lpj=201728)
- [ 0.000000] Mount-cache hash table entries: 512
- [ 0.002000] SMP: Booting CPU1...
- [ 0.002000] CPU revision is: 0002a044 (Broadcom BMIPS4380)
- [ 0.002000] FPU revision is: 00130001
- [ 0.002000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
- [ 0.002000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
- [ 0.003000] Clockevent init: mips_hpt_frequency=202475975, mips_freq=20244785 4 (compensation=-12)
- [ 0.003000] Clockevent init: Set mips_hpt_frequency to 202447854
- [ 0.003000] SMP: CPU1 is running
- [ 0.003000] Calibrating delay loop (skipped) preset value.. 403.45 BogoMIPS ( lpj=201728)
- [ 0.003000] Brought up 2 CPUs
- [ 0.007000] NET: Registered protocol family 16
- [ 0.009000] warning: USB IOC not initialized by bootloader, assuming active l ow
- [ 0.021000] bio: create slab <bio-0> at 0
- [ 0.023000] SCSI subsystem initialized
- [ 0.024000] usbcore: registered new interface driver usbfs
- [ 0.024000] usbcore: registered new interface driver hub
- [ 0.025000] usbcore: registered new device driver usb
- [ 0.031000] Switched to high resolution mode on CPU 0
- [ 0.031000] Switched to high resolution mode on CPU 1
- [ 0.032000] NET: Registered protocol family 2
- [ 0.032000] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.033000] TCP established hash table entries: 65536 (order: 7, 524288 bytes )
- [ 0.038000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.042000] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.042000] TCP reno registered
- [ 0.042000] NET: Registered protocol family 1
- [ 0.046000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.046000] NTFS driver 2.1.29 [Flags: R/O].
- [ 0.046000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
- [ 0.047000] yaffs Apr 7 2010 17:45:42 Installing.
- [ 0.047000] JFS: nTxBlock = 2281, nTxLock = 18253
- [ 0.054000] msgmni has been set to 570
- [ 0.055000] io scheduler noop registered
- [ 0.055000] io scheduler cfq registered (default)
- [ 0.056000] Serial: bcm97xxx driver $Revision: 1.1.2.2 $
- [ 0.057000] bcm3250_serial.0: ttyS0 at MMIO 0x10400180 (irq = 24) is a BCM325 0_UPG
- [ 0.057000] console handover: boot [uart0] -> real [ttyS0]
- [ 0.057000] bcm3250_serial.1: ttyS1 at MMIO 0x104001a0 (irq = 17) is a BCM325 0_UPG
- [ 0.057000] bcm3250_serial.2: ttyS2 at MMIO 0x104001c0 (irq = 18) is a BCM325 0_UPG
- [ 0.063000] loop: module loaded
- [ 0.064000] bcmemac: Broadcom STB 10/100 EMAC driver v3.0
- [ 0.067000] bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:e0:9 1:da:aa:65)
- [ 0.068000] Broadcom STB NAND controller (BrcmNand Controller)
- [ 0.068000] BCM-INF: Initializing bcmdriver version $ 14 $
- [ 0.068000] BCM-INF: Total intc words=2,Total Irqs=65
- [ 0.069000] BCM-INF: Global Interrupt Mask 0:0xBF7CFFFE,1:0x0FE62F78,2:0x0000 0000,3:0x00000000
- [ 0.069000] BCM-INF: Initialization complete...
- [ 0.069000] LG Driver Init!
- [ 0.070000] TCP cubic registered
- [ 0.070000] NET: Registered protocol family 17
- [ 0.070000] RPC: Registered udp transport module.
- [ 0.070000] RPC: Registered tcp transport module.
- [ 0.070000] EBI CS0: setting up NAND flash (primary)
- [ 0.071000] i=0, CS[0] = 0
- [ 0.071000] brcmnand_probe: CS0: dev_id=98dc9015
- [ 0.071000] After: NandSelect=40000101, nandConfig=17152300
- [ 0.071000] DevId 98dc9015 may not be supported. Will use config info
- [ 0.071000] NAND Config: Reg=17152300, chipSize=512 MB, blockSize=128K, erase _shift=11
- [ 0.071000] busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
- [ 0.071000] timing1 not adjusted: 3233422f
- [ 0.071000] timing2 not adjusted: 80000fc6
- [ 0.071000] BrcmNAND mfg 0 0 UNSUPPORTED NAND CHIP 512MB
- [ 0.071000]
- [ 0.071000] Found NAND: ACC=f7441010, cfg=17152300, flashId=98dc9015, tim1=32 33422f, tim2=80000fc6
- [ 0.071000] BrcmNAND version = 0x0300 512MB @00000000
- [ 0.071000] brcmnand_probe: CS0: dev_id=98dc9015
- [ 0.071000] After: NandSelect=40000101, nandConfig=17152300
- [ 0.071000] Found NAND chip on Chip Select 0, chipSize=512MB, usable size=512 MB, base=0
- [ 0.071000] brcmnand_scan: B4 nand_select = 40000101
- [ 0.071000] brcmnand_scan: After nand_select = 40000101
- [ 0.071000] ACC_CONTROL for SLC NAND: f7441010, eccLevel=4
- [ 0.071000] Disable WR_PREEMPT: ACC_CONTROL = f5441010 from f7441010
- [ 0.071000] SLC flash: Corrected ACC_CONTROL = f5441010 from f7441010
- [ 0.071000] brcmnand_scan: CORR ERR threshold set to 2 bits
- [ 0.071000] page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shif t=17
- [ 0.071000] Brcm NAND controller version = 3.0 NAND flash size 512MB @0000000 0
- [ 0.071000] ECC layout=brcmnand_oob_bch4_2k
- [ 0.071000] mtd->oobsize=64, mtd->eccOobSize=16
- [ 0.071000] brcmnand_scan: mtd->oobsize=64
- [ 0.071000] brcmnand_scan: oobavail=35, eccsize=512, writesize=2048
- [ 0.071000] brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel= 4, eccbytes=7
- [ 0.071000] -->EDU_init:
- [ 0.071000] EDU_init: MEMC_0_1_CLIENT_INFO_45 = 001fff3f overwritten. Please fix your RTS
- [ 0.071000] rf5s=00000000, rf5m=00ffffff, pcis=00000000,pcim=00ffffff
- [ 0.071000] prev: rf5s=00000000, rf5m=00000000, pcis=00000000,pcim=00000000
- [ 0.072000] numchips=1, size=20000000
- [ 0.072000] Init nand bad block information...
- [ 0.081000] nand bad block information:
- [ 0.082000] block map :
- [ 0.082000] data block : 0x00000000 (+0x1ec00000)
- [ 0.082000] info block : 0x1ec00000 (+0x00400000)
- [ 0.082000] redir block : 0x1f000000 (+0x01000000)
- [ 0.082000] magic = 0x8192a5a6
- [ 0.082000] bad block count = 0(0+0)
- [ 0.082000] assign index = 4095
- [ 0.082000] mtd info : # of partition = 40
- [ 0.082000] Creating 41 MTD partitions on "brcmnand.0":
- [ 0.082000] 0x000000000000-0x0000000c0000 : "boot"
- [ 0.084000] 0x0000000c0000-0x000000100000 : "mtdinfo"
- [ 0.085000] 0x000000100000-0x000000140000 : "crc32info"
- [ 0.086000] 0x000000140000-0x000000440000 : "rootfs"
- [ 0.087000] 0x00000ec40000-0x00000ec80000 : "lginit"
- [ 0.088000] 0x000000480000-0x0000004c0000 : "model"
- [ 0.089000] 0x0000004c0000-0x000000540000 : "logo"
- [ 0.090000] 0x000019f00000-0x00001a700000 : "data"
- [ 0.091000] 0x00000ec80000-0x00000ef80000 : "kernel"
- [ 0.092000] 0x000000840000-0x000001840000 : "lgapp"
- [ 0.093000] 0x000001840000-0x000003040000 : "lgres"
- [ 0.094000] 0x000003040000-0x000004040000 : "lgfont"
- [ 0.095000] 0x000004040000-0x000004440000 : "ezcal"
- [ 0.097000] 0x000004440000-0x000004c40000 : "estream"
- [ 0.098000] 0x000004c40000-0x000005440000 : "opensrc"
- [ 0.099000] 0x000005440000-0x00000a440000 : "addon"
- [ 0.100000] 0x00000c440000-0x00000ec40000 : "game"
- [ 0.101000] 0x00001db00000-0x00001de00000 : "fladata"
- [ 0.102000] 0x00000a440000-0x00000c440000 : "browser"
- [ 0.103000] 0x00001bb00000-0x00001db00000 : "brodata"
- [ 0.105000] 0x00001a700000-0x00001bb00000 : "vcsdata"
- [ 0.106000] 0x00001ea40000-0x00001eb40000 : "nvram"
- [ 0.107000] 0x00001e800000-0x00001e840000 : "idfile"
- [ 0.108000] 0x00001e840000-0x00001e8c0000 : "cert"
- [ 0.109000] 0x00001e8c0000-0x00001ea40000 : "authcxt"
- [ 0.111000] 0x000018f80000-0x000019100000 : "user"
- [ 0.112000] 0x00001de00000-0x00001e800000 : "sdpdata"
- [ 0.113000] 0x000000440000-0x000000480000 : "lginit"
- [ 0.114000] 0x000000540000-0x000000840000 : "kernel"
- [ 0.115000] 0x00000ef80000-0x00000ff80000 : "lgapp"
- [ 0.117000] 0x00000ff80000-0x000011780000 : "lgres"
- [ 0.118000] 0x000011780000-0x000011f80000 : "opensrc"
- [ 0.119000] 0x000011f80000-0x000016f80000 : "addon"
- [ 0.120000] 0x000016f80000-0x000018f80000 : "browser"
- [ 0.121000] 0x000019100000-0x000019f00000 : "remain"
- [ 0.123000] 0x00001eb40000-0x00001eb80000 : "hist"
- [ 0.124000] 0x00001eb80000-0x00001ebc0000 : "env_nvm"
- [ 0.125000] 0x00001ebc0000-0x00001ec00000 : "macadr"
- [ 0.127000] 0x00001ec00000-0x00001f000000 : "bbminfo"
- [ 0.128000] 0x00001f000000-0x000020000000 : "reserved"
- [ 0.129000] 0x000000000000-0x000020000000 : "total"
- [ 0.138000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
- [ 0.146000] VFS: Unable to mount lginit fs: -22
- [ 0.147000] Freeing unused kernel memory: 152k freed
- [ 0.466000] yaffs: dev is 32505880 name is "mtdblock24"
- [ 0.466000] yaffs: passed flags ""
- [ 0.466000] yaffs: Attempting MTD mount on 31.24, "mtdblock24"
- [ 0.466000] yaffs: restored from checkpoint
- [ 0.467000] yaffs_read_super: isCheckpointed 1
- [ 0.471000] yaffs: dev is 32505863 name is "mtdblock7"
- [ 0.471000] yaffs: passed flags ""
- [ 0.471000] yaffs: Attempting MTD mount on 31.7, "mtdblock7"
- [ 0.475000] yaffs: restored from checkpoint
- [ 0.475000] yaffs_read_super: isCheckpointed 1
- [ 0.531000] Empty flash at 0x000a3398 ends at 0x000a3800
- [ 0.596000] yaffs: dev is 32505873 name is "mtdblock17"
- [ 0.596000] yaffs: passed flags ""
- [ 0.596000] yaffs: Attempting MTD mount on 31.17, "mtdblock17"
- [ 0.598000] yaffs: restored from checkpoint
- [ 0.598000] yaffs_read_super: isCheckpointed 1
- [ 0.610000] yaffs: dev is 32505875 name is "mtdblock19"
- [ 0.610000] yaffs: passed flags ""
- [ 0.610000] yaffs: Attempting MTD mount on 31.19, "mtdblock19"
- [ 2.304000] yaffs_read_super: isCheckpointed 0
- [ 2.350000] cramfs: checking physical address 0x2600000 for linear cramfs ima ge
- [ 2.350000] cramfs: linear cramfs image appears to be 22340 KB in size
- [ 3.111000] JFFS2 notice: (318) check_node_data: wrong data CRC in data node at 0x000b4db8: read 0x6744e26d, calculated 0x8a96c5b5.
- [ 3.168000] JFFS2 notice: (318) check_node_data: wrong data CRC in data node at 0x000a2f88: read 0x55150c7b, calculated 0x22fe4a75.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement