bbb-PXE-1

fdtfile: beagle-bone-black/uImage-am335x-boneblack.dtb                                                                                                 [37/196]
link up on port 0, speed 100, full duplex
Using cpsw device
host 192.168.42.3 is alive
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.42.3; our IP address is 192.168.42.13
Filename 'beagle-bone-black/uImage'.
Load address: 0x80300000
Loading: *
TFTP error: 'Only absolute filenames allowed' (2)
Not retrying...
Booting from nfs...
bootargs=console=ttyO0,115200n8 ip=192.168.42.13:192.168.42.3:192.168.42.3:255.255.255.0:beagle-bone-black:eth0:off nfsroot=192.168.42.3:/opt/poky/bbb-rootfs,v
3,tcp noinitrd nohlt panic=1
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Card did not respond to voltage select!
Card did not respond to voltage select!
SD/MMC found on device 0
Card did not respond to voltage select!
Card did not respond to voltage select!
** Bad device mmc 0 **
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
switch to partitions #0, OK
mmc1(part 0) is current device
SD/MMC found on device 1
** File not found /boot/beagle-bone-black/uImage **
## Error: "bootcmd_nand0" not defined
starting USB...
USB0:   Port not available.
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 192.168.42.218 (1008 ms)
Using cpsw device
TFTP from server 192.168.42.10; our IP address is 192.168.42.218
Filename 'pxelinux.0'.
Load address: 0x82000000
Loading: *
ARP Retry count exceeded; starting again
missing environment variable: pxeuuid
Retrieving file: pxelinux.cfg/01-78-a5-04-c9-fd-9b
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.42.10; our IP address is 192.168.42.218
Filename 'pxelinux.cfg/01-78-a5-04-c9-fd-9b'.
Load address: 0x80100000
Loading: *
ARP Retry count exceeded; starting again
Retrieving file: pxelinux.cfg/C0A82ADA
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.42.10; our IP address is 192.168.42.218
Filename 'pxelinux.cfg/C0A82ADA'.
Load address: 0x80100000
Loading: *
ARP Retry count exceeded; starting again
Retrieving file: pxelinux.cfg/C0A82AD
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.42.10; our IP address is 192.168.42.218
Filename 'pxelinux.cfg/C0A82AD'.
Load address: 0x80100000
Loading: *
ARP Retry count exceeded; starting again
Retrieving file: pxelinux.cfg/C0A82A
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.42.10; our IP address is 192.168.42.218
Filename 'pxelinux.cfg/C0A82A'.
Load address: 0x80100000
Loading: *