UTAU plugin that will never be finished

Notes:


General:

All the input fields that support letters are case sensitive. All the tools that
have checkboxes will be in gray if not checked unless it says otherwise in the
tool's description. When a field supports letters, numbers, special characters
and spaces. By saying letters, I mean it'll support both Romanized letters,
Hiragana, Katakana and Kanji.


Note length:

Supports numbers only. Needs to be checked to work. If the note(n) is shorter(<)
than the value entered, the settings below apply(perfect for Consonant Velocity).
If it's unchecked, the plugin will act as if it doesn't exist.

Note control(the little dropdown list on the right of Note length box):

Will work only if the note is specified. The default is blank value which means
that the option will be ignored. It's used for lyrics in different ranges
(perfect for Flags). Available notes are from B7(highest)
to C1(lowest).

"Up" and "Down":
Are a help to specify a tonal range of notes which will be affected by the
settings which means that if you check "Up" the notes from the specified note up
will all be affected. Same goes for the down option. If none selected, the
plugin will only change the settings of the specified note. If the note is
blank, they are grayed out. If one is checked the other one will automatically
get grayed out.



______________________________________________________________________________



Crossfade tool:

Will work only if the checkbox is checked.

Lyrics box:
Will support letters, spaces, special characters and numbers and they will be
treated as strings. You'll use a comma(",") in between different lyric inputs.
Only the lyrics specified will be affected by the settings you have set below.



______________________________________________________________________________



Envelope control:

Will affect the velocity of the sample. I don't need to get into deep detail
here because all of it is not important.

"p"s and "v"s:
Supports humbers only. "p"s are for horizontal and "v"s are for vertical value.
Highest value of "v" is 200 and the lowest is 0. Highest value for "p" is 500
and lowest is 0. Number that follows them tells us which dot is it.
Default values for dots will be:
(number of the dot=horizontal value; vertical value)
1=0; 0
2=20; 100
3=20; 100
4=0; 0
(look at the envelope1.PNG)
The default value of others is blank. Later, it'll be added by the "ADD" button.
Fifth dot will follow the second one around until it gets a different value
(basically, fifth dot has the same value as the second one until specified
differently). All points' values can be edited in any way.

ADD button(1):
It adds another point to the envelope making it more flexible. The value
assigned to those points is the middle number of front and back dot's value.
Newly added points will be shown after the second dot, meaning that, then, it'll
go "1,2,5,6,7,8, ... ,3,4". The button itself will just add the values to the dots
that will be in the middle of the dot before and the dot after and the vertical
value will be the same.

Envelope preview:
The box itself just mimics the settings we have at the moment. New dots(from 5
on) will be shown in lighter shade of red. The blue line is there just to show
how dots are connected. Green line is the overlap and the red line is the
preutterance. The settings we'll have in Preutterance and Overlap boxes will
affect these lines. Black line is the middle(100 volume) is the value of
intensity, it will not be shown in the plugin itself, but I wanted the preview
to mimic the envelope editor.

*****<-- Interactive envelope preview mode only.
*****Line and Select tool:
*****Line tool is used to draw the line by which the dots will go. Select tool
*****isn't a draw tool and is used when you just want to move the dots on your
*****own.
*****Freehand draw tool is used for freely drawing what the envelope will look
*****like.

Preutterance:
Supports numbers only. Is put where the vowel starts. It will seach for the
specified aliases in the Lyrics box in oto.ini and will use those values.
However, if you want to force a certain value on all the specified samples(not
recommended) you'll just need to input your own value, otherwise, it should be
left blank. Forcing a value on samples will be good only when the specified
voicebank doesn't have Preutterance/Overlap values on standalone vowels.

Overlap:
Supports numbers only. Is put on the ending point of the overlaping part of the
consonant. Features are the same as Preutterance.



_____________________________________________________________________________




Consonant Velocity:
Supports numbers only. Highest value is 200, lowest value is 0. Chops off the
consonant.

BRE:
Supports numbers only. Maximum value is 100 and lowest is 0. Short for
breathiness.
Format filter:
Should be left checked.

Flag:
Supports numbers, letters, plus("+") and minus("-") sign(still working on
that one).



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



ADD button(2):
Adds another crossfading property like the one explained above. It has the
default settings.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




Other:
Is the same as above, it just gives the specified settings to all the sounds
which weren't specified above.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



Long notes:
Will add the specified settings to the ending points ("3" and "4"; if available
two dots before them too(unless 1, 2)).

n>:
Supports numbers only. If the note(n) is longer(>) than the value, settings
apply.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



Settings save:
The default settings are, naturally, the default value.
This allows you to save your settings so they won't be lost. Default property
won't be deletable so the "DEL" option will be grayed out. You can manually
delete it, but it'll cause the plugin to crash. You can make your settings the
default ones by renaming your settings to "default". You'll be able to open
them in any plain text editor and change numbers manually(but who would want to
do that???).