Advertisement
RobertBerger

phyboard-mira-imx6-3-6 SD card boot log

Jul 17th, 2022
196
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.38 KB | None | 0 0
  1. barebox 2021.04.0-bsp-yocto-ampliphy-i.mx6-pd21.1.1 #1 Thu Jul 14 09:03:12 UTC 2022
  2.  
  3.  
  4. Board: PHYTEC phyCORE-i.MX6 Quad with NAND
  5. detected i.MX6 Quad revision 1.5
  6. i.MX reset reason WDG (SRSR: 0x00000010)
  7. i.MX6 Quad unique ID: 121821d4ee6ba5b5
  8. mdio_bus: miibus0: probed
  9. eth0: got preset MAC address: 50:2d:f4:16:2d:bd
  10. nand_base: device found, Manufacturer ID: 0xef, Chip ID: 0xd3
  11. nand_base: Winbond W29N08GV
  12. nand_base: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  13. Bad block table found at page 524224, version 0x01
  14. Bad block table found at page 524160, version 0x01
  15. m25p80 flash@00: n25q128a13 (16384 Kbytes)
  16. imx-usb 2184200.usb@2184200.of: USB EHCI 1.00
  17. imx-esdhc 2190000.mmc@2190000.of: registered as mmc0
  18. da9063 da90620: da9062 with id 62.12.ff.1a detected
  19. state: New state registered 'state'
  20. state: Using bucket 0@0x00000000
  21. netconsole: registered as netconsole-1
  22. phySOM-i.MX6: Using environment in MMC
  23. malloc space: 0x2fe7a760 -> 0x4fcf4ebf (size 510.5 MiB)
  24. mmc0: detected SD card version 2.0
  25. mmc0: registered mmc0
  26.  
  27. Hit m for menu or any to stop autoboot: 1
  28. Booting entry 'mmc'
  29. Found node /soc/bus@2000000
  30. mounted /dev/mmc0.0 on /mnt/mmc0.0
  31. ext4 ext40: EXT2 rev 1, inode_size 256, descriptor size 64
  32. mounted /dev/mmc0.1 on /mnt/mmc0.1
  33.  
  34. Loading ARM Linux zImage '/mnt/mmc0.0/zImage'
  35. Loading devicetree from '/mnt/mmc0.0/oftree'
  36. commandline: consoleblank=0 console=ttymxc1,115200n8 root=/dev/mmcblk0p2 rootflags=data=journal imxdrm.legacyfb_depth=32 rootwait ro fsck.repair=yes
  37. Starting kernel in secure mode
  38. [ 0.000000] Booting Linux on physical CPU 0x0
  39. [ 0.000000] Linux version 5.19.0-rc6 (oe-user@oe-host) (arm-phytec-linux-gnueabi-gcc (GCC) 10.3.0, GNU ld (GNU Binutils) 2.36.1.20210703) #1 SMP Wed Jul 13 19:08:14 UTC 2022
  40. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  41. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  42. [ 0.000000] OF: fdt: Machine model: PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND
  43. [ 0.000000] Memory policy: Data cache writealloc
  44. [ 0.000000] efi: UEFI not found.
  45. [ 0.000000] cma: Reserved 64 MiB at 0x4b800000
  46. [ 0.000000] Zone ranges:
  47. [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff]
  48. [ 0.000000] Normal empty
  49. [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff]
  50. [ 0.000000] Movable zone start for each node
  51. [ 0.000000] Early memory node ranges
  52. [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff]
  53. [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff]
  54. [ 0.000000] percpu: Embedded 17 pages/cpu s37652 r8192 d23788 u69632
  55. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
  56. [ 0.000000] Kernel command line: consoleblank=0 console=ttymxc1,115200n8 root=/dev/mmcblk0p2 rootflags=data=journal imxdrm.legacyfb_depth=32 rootwait ro fsck.repair=yes
  57. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  58. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  59. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  60. [ 0.000000] Memory: 944972K/1048576K available (15360K kernel code, 2490K rwdata, 6008K rodata, 2048K init, 431K bss, 38068K reserved, 65536K cma-reserved, 195592K highmem)
  61. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  62. [ 0.000000] trace event string verifier disabled
  63. [ 0.000000] rcu: Hierarchical RCU implementation.
  64. [ 0.000000] rcu: RCU event tracing is enabled.
  65. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
  66. [ 0.000000] Tracing variant of Tasks RCU enabled.
  67. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  68. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  69. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  70. [ 0.000000] L2C-310 errata 752271 769419 enabled
  71. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  72. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  73. [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
  74. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  75. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  76. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
  77. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  78. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  79. [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  80. [ 0.000034] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  81. [ 0.009355] Console: colour dummy device 80x30
  82. [ 0.009480] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  83. [ 0.009507] pid_max: default: 32768 minimum: 301
  84. [ 0.009918] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  85. [ 0.009965] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  86. [ 0.011134] CPU: Testing write buffer coherency: ok
  87. [ 0.011239] CPU0: Spectre v2: using BPIALL workaround
  88. [ 0.011779] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  89. [ 0.013321] cblist_init_generic: Setting adjustable number of callback queues.
  90. [ 0.013341] cblist_init_generic: Setting shift to 2 and lim to 1.
  91. [ 0.013626] Setting up static identity map for 0x10300000 - 0x103000ac
  92. [ 0.017428] rcu: Hierarchical SRCU implementation.
  93. [ 0.025741] EFI services will not be available.
  94. [ 0.026424] smp: Bringing up secondary CPUs ...
  95. [ 0.027813] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  96. [ 0.027843] CPU1: Spectre v2: using BPIALL workaround
  97. [ 0.029428] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  98. [ 0.029454] CPU2: Spectre v2: using BPIALL workaround
  99. [ 0.031037] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  100. [ 0.031067] CPU3: Spectre v2: using BPIALL workaround
  101. [ 0.031247] smp: Brought up 1 node, 4 CPUs
  102. [ 0.031272] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  103. [ 0.031292] CPU: All CPU(s) started in SVC mode.
  104. [ 0.032248] devtmpfs: initialized
  105. [ 0.048586] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  106. [ 0.048979] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  107. [ 0.049022] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  108. [ 0.055263] pinctrl core: initialized pinctrl subsystem
  109. [ 0.058413] DMI not present or invalid.
  110. [ 0.059814] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  111. [ 0.065824] DMA: preallocated 256 KiB pool for atomic coherent allocations
  112. [ 0.071342] thermal_sys: Registered thermal governor 'step_wise'
  113. [ 0.071755] cpuidle: using governor menu
  114. [ 0.072240] CPU identified as i.MX6Q, silicon rev 1.5
  115. [ 0.131265] platform 2400000.ipu: Fixing up cyclic dependency with 120000.hdmi
  116. [ 0.131419] platform 2400000.ipu: Fixing up cyclic dependency with 20e0000.iomuxc-gpr:ipu1_csi0_mux
  117. [ 0.133732] platform 2800000.ipu: Fixing up cyclic dependency with 120000.hdmi
  118. [ 0.133876] platform 2800000.ipu: Fixing up cyclic dependency with 20e0000.iomuxc-gpr:ipu2_csi1_mux
  119. [ 0.149665] No ATAGs?
  120. [ 0.149925] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  121. [ 0.149947] hw-breakpoint: maximum watchpoint size is 4 bytes.
  122. [ 0.156681] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
  123. [ 0.170694] Serial: AMBA PL011 UART driver
  124. [ 0.229591] mxs-dma 110000.dma-apbh: initialized
  125. [ 0.245038] iommu: Default domain type: Translated
  126. [ 0.245055] iommu: DMA domain TLB invalidation policy: strict mode
  127. [ 0.246529] SCSI subsystem initialized
  128. [ 0.247406] usbcore: registered new interface driver usbfs
  129. [ 0.247496] usbcore: registered new interface driver hub
  130. [ 0.247575] usbcore: registered new device driver usb
  131. [ 0.247984] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator
  132. [ 0.248241] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
  133. [ 0.248522] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator
  134. [ 0.248775] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
  135. [ 0.252681] i2c i2c-0: IMX I2C adapter registered
  136. [ 0.254017] i2c i2c-1: IMX I2C adapter registered
  137. [ 0.256678] i2c i2c-2: IMX I2C adapter registered
  138. [ 0.259246] pps_core: LinuxPPS API ver. 1 registered
  139. [ 0.259259] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  140. [ 0.259296] PTP clock support registered
  141. [ 0.259757] EDAC MC: Ver: 3.0.0
  142. [ 0.265962] vgaarb: loaded
  143. [ 2.545029] clocksource: Switched to clocksource mxc_timer1
  144. [ 2.564443] NET: Registered PF_INET protocol family
  145. [ 2.565343] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  146. [ 2.568981] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  147. [ 2.569043] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  148. [ 2.569085] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  149. [ 2.569244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  150. [ 2.569522] TCP: Hash tables configured (established 8192 bind 8192)
  151. [ 2.569888] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  152. [ 2.569970] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  153. [ 2.570328] NET: Registered PF_UNIX/PF_LOCAL protocol family
  154. [ 2.571429] RPC: Registered named UNIX socket transport module.
  155. [ 2.571448] RPC: Registered udp transport module.
  156. [ 2.571458] RPC: Registered tcp transport module.
  157. [ 2.571466] RPC: Registered tcp NFSv4.1 backchannel transport module.
  158. [ 2.571482] PCI: CLS 0 bytes, default 64
  159. [ 2.572623] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing.
  160. [ 2.624696] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  161. [ 2.628475] Initialise system trusted keyrings
  162. [ 2.628973] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  163. [ 2.640578] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  164. [ 2.641914] NFS: Registering the id_resolver key type
  165. [ 2.641988] Key type id_resolver registered
  166. [ 2.642002] Key type id_legacy registered
  167. [ 2.642185] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  168. [ 2.642199] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  169. [ 2.642258] ntfs: driver 2.1.32 [Flags: R/O].
  170. [ 2.643109] Key type asymmetric registered
  171. [ 2.643125] Asymmetric key parser 'x509' registered
  172. [ 2.643410] bounce: pool size: 64 pages
  173. [ 2.643618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  174. [ 2.643635] io scheduler mq-deadline registered
  175. [ 2.643647] io scheduler kyber registered
  176. [ 2.760113] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
  177. [ 2.760149] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
  178. [ 2.870627] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
  179. [ 2.880110] SuperH (H)SCI(F) driver initialized
  180. [ 2.882256] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 269, base_baud = 5000000) is a IMX
  181. [ 3.753760] printk: console [ttymxc1] enabled
  182. [ 3.760682] msm_serial: driver initialized
  183. [ 3.764800] STMicroelectronics ASC driver initialized
  184. [ 3.773339] STM32 USART driver initialized
  185. [ 3.817265] brd: module loaded
  186. [ 3.833625] loop: module loaded
  187. [ 3.837506] at24 2-0050: supply vcc not found, using dummy regulator
  188. [ 3.845024] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
  189. [ 3.870159] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xd3
  190. [ 3.876586] nand: Winbond W29N08GV
  191. [ 3.880005] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  192. [ 3.888703] Bad block table found at page 524224, version 0x01
  193. [ 3.894912] Bad block table found at page 524160, version 0x01
  194. [ 3.901289] 3 fixed-partitions partitions found on MTD device gpmi-nand
  195. [ 3.907985] Creating 3 MTD partitions on "gpmi-nand":
  196. [ 3.913061] 0x000000000000-0x000001000000 : "barebox"
  197. [ 3.920997] 0x000001000000-0x000001100000 : "barebox-environment"
  198. [ 3.929759] 0x000001100000-0x000040000000 : "root"
  199. [ 3.943912] gpmi-nand 112000.nand-controller: driver registered.
  200. [ 3.967165] CAN device driver interface
  201. [ 3.973761] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  202. [ 3.983020] e1000e: Intel(R) PRO/1000 Network Driver
  203. [ 3.988042] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  204. [ 3.994086] igb: Intel(R) Gigabit Ethernet Network Driver
  205. [ 3.999559] igb: Copyright (c) 2007-2014 Intel Corporation.
  206. [ 4.017419] pegasus: Pegasus/Pegasus II USB Ethernet driver
  207. [ 4.023089] usbcore: registered new interface driver pegasus
  208. [ 4.028891] usbcore: registered new interface driver asix
  209. [ 4.034368] usbcore: registered new interface driver ax88179_178a
  210. [ 4.040580] usbcore: registered new interface driver cdc_ether
  211. [ 4.046567] usbcore: registered new interface driver smsc75xx
  212. [ 4.052427] usbcore: registered new interface driver smsc95xx
  213. [ 4.058297] usbcore: registered new interface driver net1080
  214. [ 4.064033] usbcore: registered new interface driver cdc_subset
  215. [ 4.070061] usbcore: registered new interface driver zaurus
  216. [ 4.075817] usbcore: registered new interface driver cdc_ncm
  217. [ 4.088717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  218. [ 4.095329] ehci-pci: EHCI PCI platform driver
  219. [ 4.099869] ehci-platform: EHCI generic platform driver
  220. [ 4.105705] ehci-omap: OMAP-EHCI Host Controller driver
  221. [ 4.111295] ehci-orion: EHCI orion driver
  222. [ 4.115781] SPEAr-ehci: EHCI SPEAr driver
  223. [ 4.120161] ehci-st: EHCI STMicroelectronics driver
  224. [ 4.125460] ehci-atmel: EHCI Atmel driver
  225. [ 4.129822] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  226. [ 4.136093] ohci-pci: OHCI PCI platform driver
  227. [ 4.140650] ohci-platform: OHCI generic platform driver
  228. [ 4.146442] SPEAr-ohci: OHCI SPEAr driver
  229. [ 4.150840] ohci-st: OHCI STMicroelectronics driver
  230. [ 4.156150] ohci-atmel: OHCI Atmel driver
  231. [ 4.161738] usbcore: registered new interface driver usb-storage
  232. [ 4.183457] i2c_dev: i2c /dev entries driver
  233. [ 4.232035] sdhci: Secure Digital Host Controller Interface driver
  234. [ 4.238285] sdhci: Copyright(c) Pierre Ossman
  235. [ 4.248097] Synopsys Designware Multimedia Card Interface Driver
  236. [ 4.258969] sdhci-pltfm: SDHCI platform and OF driver helper
  237. [ 4.267277] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO
  238. [ 4.278505] ledtrig-cpu: registered to indicate activity on CPUs
  239. [ 4.287649] caam 2100000.crypto: Entropy delay = 3200
  240. [ 4.310424] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
  241. [ 4.353517] caam 2100000.crypto: Instantiated RNG4 SH0
  242. [ 4.354605] mmc0: new high speed SDHC card at address 59b4
  243. [ 4.365809] mmcblk0: mmc0:59b4 USDU1 29.4 GiB
  244. [ 4.375303] mmcblk0: p1 p2
  245. [ 4.414283] caam 2100000.crypto: Instantiated RNG4 SH1
  246. [ 4.419489] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4)
  247. [ 4.426162] caam 2100000.crypto: job rings = 2, qi = 0
  248. [ 4.442270] caam algorithms registered in /proc/crypto
  249. [ 4.447781] caam 2100000.crypto: registering rng-caam
  250. [ 4.475453] caam 2100000.crypto: rng crypto API alg registered prng-caam
  251. [ 4.485601] usbcore: registered new interface driver usbhid
  252. [ 4.491201] usbhid: USB HID core driver
  253. [ 4.512573] NET: Registered PF_INET6 protocol family
  254. [ 4.519753] Segment Routing with IPv6
  255. [ 4.523538] In-situ OAM (IOAM) with IPv6
  256. [ 4.527735] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  257. [ 4.534857] NET: Registered PF_PACKET protocol family
  258. [ 4.539990] can: controller area network core
  259. [ 4.544486] NET: Registered PF_CAN protocol family
  260. [ 4.549352] can: raw protocol
  261. [ 4.552342] can: broadcast manager protocol
  262. [ 4.556586] can: netlink gateway - max_hops=1
  263. [ 4.561439] Key type dns_resolver registered
  264. [ 4.567923] ThumbEE CPU extension supported.
  265. [ 4.572228] Registering SWP/SWPB emulation handler
  266. [ 4.578311] Loading compiled-in X.509 certificates
  267. [ 4.657458] random: crng init done
  268. [ 4.675969] ci_hdrc ci_hdrc.1: EHCI Host Controller
  269. [ 4.680911] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  270. [ 4.715079] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  271. [ 4.721830] hub 1-0:1.0: USB hub found
  272. [ 4.725725] hub 1-0:1.0: 1 port detected
  273. [ 4.758186] imx-uart 21ec000.serial: deferred probe timeout, ignoring dependency
  274. [ 4.772529] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  275. [ 4.791980] imx-uart 21ec000.serial: deferred probe timeout, ignoring dependency
  276. [ 4.810416] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, O_DIRECT and fast_commit support!
  277. [ 4.823409] EXT4-fs: Mount option(s) incompatible with ext2
  278. [ 4.835284] EXT4-fs (mmcblk0p2): mounted filesystem with journalled data mode. Quota mode: disabled.
  279. [ 4.844519] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  280. [ 4.852185] devtmpfs: mounted
  281. [ 4.862590] Freeing unused kernel image (initmem) memory: 2048K
  282. [ 4.896165] Run /sbin/init as init process
  283. [ 5.236466] systemd[1]: systemd 247.6+ running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ +LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  284. [ 5.259988] systemd[1]: Detected architecture arm.
  285.  
  286. Welcome to The ampliPHY Distribution BSP-Yocto-Ampliphy-i.MX6-PD21.1.1!
  287.  
  288. [ 5.306204] systemd[1]: Set hostname to <phyboard-mira-imx6-3>.
  289. [ 5.350496] systemd[1]: Using hardware watchdog 'imx2+ watchdog', version 0, device /dev/watchdog
  290. [ 5.359622] systemd[1]: Set hardware watchdog to 1min.
  291. [ 6.109826] systemd[1]: Queued start job for default target Multi-User System.
  292. [ 6.121908] systemd[1]: Created slice system-getty.slice.
  293. [ OK ] Created slice system-getty.slice.
  294. [ 6.156612] systemd[1]: Created slice system-modprobe.slice.
  295. [ OK ] Created slice system-modprobe.slice.
  296. [ 6.196629] systemd[1]: Created slice system-serial\x2dgetty.slice.
  297. [ OK ] Created slice system-serial\x2dgetty.slice.
  298. [ 6.236283] systemd[1]: Created slice User and Session Slice.
  299. [ OK ] Created slice User and Session Slice.
  300. [ 6.275899] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  301. [ OK ] Started Dispatch Password …ts to Console Directory Watch.
  302. [ 6.315769] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  303. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  304. [ 6.355943] systemd[1]: Reached target Paths.
  305. [ OK ] Reached target Paths.
  306. [ 6.385564] systemd[1]: Reached target Remote File Systems.
  307. [ OK ] Reached target Remote File Systems.
  308. [ 6.425395] systemd[1]: Reached target Slices.
  309. [ OK ] Reached target Slices.
  310. [ 6.455667] systemd[1]: Reached target Swap.
  311. [ OK ] Reached target Swap.
  312. [ 6.492802] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  313. [ 6.502227] systemd[1]: Listening on Journal Socket (/dev/log).
  314. [ OK ] Listening on Journal Socket (/dev/log).
  315. [ 6.536574] systemd[1]: Listening on Journal Socket.
  316. [ OK ] Listening on Journal Socket.
  317. [ 6.576725] systemd[1]: Listening on Network Service Netlink Socket.
  318. [ OK ] Listening on Network Service Netlink Socket.
  319. [ 6.616651] systemd[1]: Listening on udev Control Socket.
  320. [ OK ] Listening on udev Control Socket.
  321. [ 6.656224] systemd[1]: Listening on udev Kernel Socket.
  322. [ OK ] Listening on udev Kernel Socket.
  323. [ 6.696236] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  324. [ 6.705433] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped.
  325. [ 6.720648] systemd[1]: Mounting Kernel Debug File System...
  326. Mounting Kernel Debug File System...
  327. [ 6.761227] systemd[1]: Mounting Kernel Trace File System...
  328. Mounting Kernel Trace File System...
  329. [ 6.807524] systemd[1]: Mounting Temporary Directory (/tmp)...
  330. Mounting Temporary Directory (/tmp)...
  331. [ 6.845981] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
  332. [ 6.864312] systemd[1]: Starting Load Kernel Module configfs...
  333. Starting Load Kernel Module configfs...
  334. [ 6.901690] systemd[1]: Starting Load Kernel Module drm...
  335. Starting Load Kernel Module drm...
  336. [ 6.941766] systemd[1]: Starting Load Kernel Module fuse...
  337. Starting Load Kernel Module fuse...
  338. [ 6.981517] systemd[1]: Starting File System Check on Root Device...
  339. Starting File System Check on Root Device...
  340. [ 7.028440] systemd[1]: Starting Journal Service...
  341. Starting Journal Service...
  342. [ 7.040140] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
  343. [ 7.056117] systemd[1]: Starting Apply Kernel Variables...
  344. Starting Apply Kernel Variables...
  345. [ 7.069925] systemd[1]: Starting Coldplug All udev Devices...
  346. Starting Coldplug All udev Devices...
  347. [ 7.099973] systemd[1]: Mounted Kernel Debug File System.
  348. [ OK ] Mounted 7.107307] systemd[1]: Mounted Kernel Trace File System.
  349. ;39mKernel Debug File System.[ 7.115482] systemd[1]: Mounted Temporary Directory (/tmp).
  350.  
  351. [ OK ] Mounted Kernel Trace File System systemd[1]: modprobe@configfs.service: Succeeded.
  352. [0m.
  353. [ OK ] Mounted[ 7.136064] systemd[1]: Finished Load Kernel Module configfs.
  354. Temporary Directory (/tmp).
  355. [ OK ] F[ 7.146028] systemd[1]: modprobe@drm.service: Succeeded.
  356. inished Load Kernel Modu[ 7.155608] systemd[1]: Finished Load Kernel Module drm.
  357. le configfs.
  358. [ OK ] Finished 7.164723] systemd[1]: modprobe@fuse.service: Succeeded.
  359. 0;1;39mLoad Kernel Module drm[ 7.173229] systemd[1]: Finished Load Kernel Module fuse.
  360. .
  361. [ OK ] Finished Load Kernel Module fuse.
  362. [ 7.248598] systemd[1]: Finished File System Check on Root Device.
  363. [ OK ] Finished File System Check on Root Device.
  364. [ 7.286361] systemd[1]: Started Journal Service.
  365. [ OK ] Started Journal Service.
  366. [ OK ] Finished Apply Kernel Variables.
  367. Mounting Kernel Configuration File System...
  368. Starting Remount Root and Kernel File Systems...
  369. [ OK ] Mounted Kernel Configuration File System.
  370. [ 7.464712] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: disabled.
  371. [ OK ] Finished Remount Root and Kernel File Systems.
  372. Starting Flush Journal to Persistent Storage...
  373. [ 7.564904] systemd-journald[161]: Received client request to flush runtime journal.
  374. Starting Create Static Device Nodes in /dev...
  375. [ OK ] Finished Flush Journal to Persistent Storage.
  376. [ OK ] Finished Create Static Device Nodes in /dev.
  377. [ OK ] Reached target Local File Systems (Pre).
  378. Mounting /var/volatile...
  379. Starting Rule-based Manage…for Device Events and Files...
  380. [ OK ] Mounted /var/volatile.
  381. [ OK ] Reached target Local File Systems.
  382. Starting Create Volatile Files and Directories...
  383. [ OK ] Started Rule-based Manager for Device Events and Files.
  384. Starting Network Service...
  385. [ OK ] Finished Create Volatile Files and Directories.
  386. Starting Network Time Synchronization...
  387. [ OK ] Started Network Service.
  388. Starting Network Name Resolution...
  389. [ OK ] Started Network Time Synchronization.
  390. [ OK ] Reached target System Time Set.
  391. [ OK ] Reached target System Time Synchronized.
  392. [ OK ] Started Network Name Resolution.
  393. [ OK ] Reached target Network.
  394. [ OK ] Reached target Host and Network Name Lookups.
  395. [ 9.876691] mtdblock: MTD device 'barebox' is NAND, please consider using UBI block devices instead.
  396. [ 9.876855] mtdblock: MTD device 'barebox-environment' is NAND, please consider using UBI block devices instead.
  397. [ 9.879676] mtdblock: MTD device 'root' is NAND, please consider using UBI block devices instead.
  398. [ OK ] Finished Coldplug All udev Devices.
  399. [ OK ] Reached target System Initialization.
  400. [ OK ] Started Daily Cleanup of Temporary Directories.
  401. [ OK ] Reached target Timers.
  402. [ OK ] Reached target Hardware activated USB gadget.
  403. [ OK ] Listening on D-Bus System Message Bus Socket.
  404. [ OK ] Reached target Sockets.
  405. [ OK ] Reached target Basic System.
  406. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
  407. [ OK ] Started D-Bus System Message Bus.
  408. [ OK ] Started Getty on tty1.
  409. [ OK ] Started Serial Getty on ttymxc1.
  410. [ OK ] Reached target Login Prompts.
  411. Starting User Login Management...
  412. [ OK ] Started User Login Management.
  413. [ OK ] Reached target Multi-User System.
  414.  
  415. ____ _ _ __ __ _____ _____ ____
  416. | _ \ | | | |\ \ / /|_ _|| ____| / ___|
  417. | |_) || |_| | \ V / | | | _| | |
  418. | __/ | _ | | | | | | |___ | |___
  419. |_| |_| |_| |_| |_| |_____| \____|
  420.  
  421. _ __ __ ____ _ ___ ____ _ _ __ __
  422. / \ | \/ || _ \ | | |_ _|| _ \ | | | |\ \ / /
  423. / _ \ | |\/| || |_) || | | | | |_) || |_| | \ V /
  424. / ___ \ | | | || __/ | |___ | | | __/ | _ | | |
  425. /_/ \_\|_| |_||_| |_____||___||_| |_| |_| |_|
  426.  
  427.  
  428. ampliPHY (Phytec Base Distribution) BSP-Yocto-Ampliphy-i.MX6-PD21.1.1 phyboard-mira-imx6-3 ttymxc1
  429.  
  430. phyboard-mira-imx6-3 login:
  431.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement