S4 active - /proc/last_kmsg #1

[    0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
[    0.000000] sec_tsp_mode: LCD_ID = 0x501010, val: 0X501010, ret1: 0x1
[    0.031005] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.031372] MSM_DCVS: msm_dcvs_early_init: Unable to initialize DCVS err=4
[    0.053222] msm_rpm_get_status(): Status id 433 not defined for target
[    0.053222] msm_rpm_get_status(): Status id 433 not defined for target
[    0.053253] msm_rpm_get_status(): Status id 433 not defined for target
[    0.053253] msm_rpm_get_status(): Status id 433 not defined for target
[    0.053253] msm_rpm_get_status(): Status id 433 not defined for target
[    0.053283] msm_rpm_get_status(): Status id 433 not defined for target
[    0.053283] msm_rpm_get_status(): Status id 433 not defined for target
[    0.053283] msm_rpm_get_status(): Status id 433 not defined for target
[    0.098663] sensor_power_on_vdd: done
[    0.154266] i2c i2c-4: Failed to register i2c client s5k3l1yx at 0x34 (-16)
[    0.154449] i2c i2c-4: Can't create device at 0x34
[    0.190124] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:3 report inf element:0x0
[    0.190338] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[    0.190582] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:4 report inf element:0x400
[    0.191040] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[    0.265686] Error-Bad Function Input
[    0.266601] Error-Bad Function Input
[    0.269714] msm_actuator_i2c_add_driver called
[    0.463562] smd_channel_probe_worker: allocation table not initialized
[    0.478576] mdm_do_first_power_on: Powering on modem for the first time
[    0.765167] cont_splash_clk_ctrl: dsi_esc_clk - clk_set_rate failed
[    0.771575] [mdnie lite] start!
[    0.771667] [mdnie lite] end!
[    0.773071] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group dde28a08
[    0.773406] Inside writeback_driver_init
[    0.773620] Inside writeback_probe
[    1.130706] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
[    1.207153] spi_qsd spi_qsd.0: chipselect 0 already in use
[    1.211669] spi_qsd spi_qsd.0: can't create new device for jc_spi
[    1.222320] msm_otg msm_otg: failed to get phy_clk
[    1.399841] couldn't get usb power supply
[    1.440734] imx175 spi driver probe
[    1.443298] imx175_spi_read : Enter - reg_addr : 0x40
[    1.448486] imx175_spi_read : Enter - reg_addr : 0x1000
[    1.453765] imx175_spi_read : Enter - reg_addr : 0x2000
[    1.458862] imx175_spi_read : Enter - reg_addr : 0x300c
[    1.468688] imx175_spi_read : Enter - reg_addr : 0x1200
[    1.473175] imx175_spi_read : Enter - reg_addr : 0x1218
[    1.482879] imx175_format_calibrationdata: is_all_supported= 1
[    1.487762] [shchang : imx175_format_afdata] Little Endian!!
[    1.493377] [shchang : imx175_format_wbdata] Little Endian!!
[    1.499298] msm_sensor_match_id: read id: 3085 expected id 3085:
[    1.505035] msm_sensor_i2c_probe s5k3h5xa probe succeeded
[    1.510528] msm_actuator_i2c_probe called
[    1.514373] msm_actuator_i2c_probe client = dd8b1c00
[    1.519378] msm_actuator_i2c_probe succeeded
[    1.523590] msm_eeprom_probe probe_fail
[    1.540710] msm_sensor_match_id: read id: 6b20 expected id 6b20:
[    1.545806] msm_sensor_i2c_probe s5k6b2yx probe succeeded
[    1.551147] msm_eeprom_probe probe_fail
[    1.587982] mmc0: No card detect facilities available
[    1.683410] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[    1.691925] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[    1.708068] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[    1.718811] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[    1.739807] msm8930_audio_init: Not the right machine type
[    1.744415] msm_audio_init: Not the right machine type
[    1.782470] mmc0: msmsdcc_execute_tuning: found good phase = 0
[    1.787750] mmc0: msmsdcc_execute_tuning: found good phase = 1
[    1.793487] mmc0: msmsdcc_execute_tuning: found good phase = 2
[    1.799346] mmc0: msmsdcc_execute_tuning: found good phase = 3
[    1.805145] mmc0: msmsdcc_execute_tuning: found good phase = 4
[    1.811004] mmc0: msmsdcc_execute_tuning: found good phase = 5
[    1.816741] mmc0: msmsdcc_execute_tuning: found good phase = 6
[    1.822662] mmc0: msmsdcc_execute_tuning: found good phase = 7
[    1.829040] mmc0: msmsdcc_execute_tuning: found good phase = 8
[    1.834289] mmc0: msmsdcc_execute_tuning: found good phase = 9
[    1.840087] mmc0: msmsdcc_execute_tuning: found good phase = 10
[    1.845977] mmc0: msmsdcc_execute_tuning: found good phase = 11
[    1.851867] mmc0: msmsdcc_execute_tuning: found good phase = 12
[    1.858367] mmc0: msmsdcc_execute_tuning: found good phase = 15
[    1.863372] mmc0: msmsdcc_execute_tuning: finally setting the tuning phase to 8
[    1.877349] sec-battery sec-battery: sec_battery_probe: Failed to Enable Wakeup Source(-6)
[    1.891052] 8921_l8: requested voltage range [3000000, 3000000] does not fit within constraints: [2800000, 2800000]
[    1.900848] irda_device_init called!
[    1.904449] barcode_emul_ice4: probe complete barcode_emul_probe
[    2.125946] init: invalid uid 'fm_radio'
[    2.129058] init: invalid uid 'fm_radio'
[    2.405578] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[    2.417449] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[    2.448059] init: Unable to open persistent property directory /data/property errno: 2
[    2.640533] request gpio lcd_22v_en_2 failed, rc=-16
[    2.687561] disable reg_L15 failed, rc=-5
[    2.974639] [mdnie lite] is negative Mode On = 0
[    2.974639] [mdnie lite] negative off when resume, tuning again!
[    2.974639] [mdnie lite] mDNIe_Set_Mode start , mode(0), background(1)
[    2.974639] [mdnie lite]  = UI MODE =
[    2.974670] [mdnie lite]  = STANDARD MODE =
[    2.974670] [mdnie lite]  send tuning cmd!!
[    3.007720] [mdnie lite] mDNIe_Set_Mode end , mode(0), background(1)
[    3.994140] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: device is in suspend state or reflash.
[ 3620.295928] SysRq : Emergency Remount R/O
[ 3620.775573] qup_i2c qup_i2c.2: QUP: I2C status flags :0x1343c8, irq:228
[ 3620.781250] qup_i2c qup_i2c.2: I2C slave addr:0x26 not connected
[ 3621.082580] mdm_power_down_common: MDM2AP_STATUS went low successfully.
[ 3621.088470] Restarting system with command 'recovery'.

No errors detected