API tools faq
paste
Advertisement
RobertBerger

4.14.39-phy1+multi_v7_defconfig

RobertBerger
May 29th, 2018
275
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.31 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2018.03-mainline-student-v2018.03-rc1 (Feb 09 2018 - 15:20:50 +0100)
  2. Boot device 1
  3. Trying to boot from MMC1
  4. mmc_load_image_raw_sector: mmc block read error
  5.  
  6.  
  7. U-Boot 2018.03-mainline-student-v2018.03-rc1 (Feb 09 2018 - 15:20:50 +0100)
  8.  
  9. CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
  10. CPU: Automotive temperature grade (-40C to 125C) at 57C
  11. Reset cause: WDOG
  12. I2C: ready
  13. DRAM: 1 GiB
  14. NAND: 1024 MiB
  15. MMC: FSL_SDHC: 0
  16. Loading Environment from SPI Flash... SF: Detected n25q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
  17. Failed (1)
  18. In: serial
  19. Out: serial
  20. Err: serial
  21. Net: FEC [PRIME]
  22. Hit any key to stop autoboot: 0
  23. bootfile: imx6q-phytec-mira-rdk-nand/uImage
  24. fdtfile: imx6q-phytec-mira-rdk-nand/uImage-imx6q-phytec-mira-rdk-nand.dtb
  25. FEC Waiting for PHY auto negotiation to complete....... done
  26. Using FEC device
  27. host 192.168.42.1 is alive
  28. Using FEC device
  29. TFTP from server 192.168.42.1; our IP address is 192.168.42.11
  30. Filename 'imx6q-phytec-mira-rdk-nand/uImage'.
  31. Load address: 0x10007fc0
  32. Loading: #################################################################
  33. #################################################################
  34. #################################################################
  35. #################################################################
  36. #################################################################
  37. #################################################################
  38. #################################################################
  39. #################################################################
  40. ######################
  41. 14.9 MiB/s
  42. done
  43. Bytes transferred = 7950912 (795240 hex)
  44. Using FEC device
  45. TFTP from server 192.168.42.1; our IP address is 192.168.42.11
  46. Filename 'imx6q-phytec-mira-rdk-nand/uImage-imx6q-phytec-mira-rdk-nand.dtb'.
  47. Load address: 0x18000000
  48. Loading: ####
  49. 11.4 MiB/s
  50. done
  51. Bytes transferred = 47830 (bad6 hex)
  52. Booting from nfs...
  53. bootargs=console=ttymxc1,115200n8 ip=192.168.42.11:192.168.42.1:192.168.42.254:255.255.255.0:imx6q-phytec-mira-rdk-nand:eth0:off nfsroot=192.168.42.1:/opt/poky/mira-rootfs,v3,tcp noinitrd nohlt panic=1 earlyprintk=ttymxc1,115200n8
  54. ## Booting kernel from Legacy Image at 10007fc0 ...
  55. Image Name: Linux-4.14.39-stable-student
  56. Image Type: ARM Linux Kernel Image (no loading done) (uncompressed)
  57. Data Size: 7950848 Bytes = 7.6 MiB
  58. Load Address: 00000000
  59. Entry Point: 00000000
  60. Verifying Checksum ... OK
  61. ## Flattened Device Tree blob at 18000000
  62. Booting using the fdt blob at 0x18000000
  63. XIP Kernel Image (no loading done) ... OK
  64. Using Device Tree in place at 18000000, end 1800ead5
  65.  
  66. Starting kernel ...
  67.  
  68. [ 0.000000] Booting Linux on physical CPU 0x0
  69. [ 0.000000] Linux version 4.14.39-stable-student (student@e450-1) (gcc version 7.3.0 (GCC)) #1 SMP Tue May 29 19:05:37 CEST 2018
  70. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  71. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  72. [ 0.000000] OF: fdt: Machine model: Phytec phyBOARD-MIRA Quad Carrier-Board with nand
  73. [ 0.000000] Memory policy: Data cache writealloc
  74. [ 0.000000] efi: Getting EFI parameters from FDT:
  75. [ 0.000000] efi: UEFI not found.
  76. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000
  77. [ 0.000000] percpu: Embedded 17 pages/cpu @ef78e000 s39436 r8192 d22004 u69632
  78. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
  79. [ 0.000000] Kernel command line: console=ttymxc1,115200n8 ip=192.168.42.11:192.168.42.1:192.168.42.254:255.255.255.0:imx6q-phytec-mira-rdk-nand:eth0:off nfsroot=192.168.42.1:/opt/poky/mira-rootfs,v3,tcp noinitrd nohlt panic=1 earlyprintk=ttymxc1,115200n8
  80. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  81. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  82. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  83. [ 0.000000] Memory: 953104K/1048576K available (11264K kernel code, 1566K rwdata, 4312K rodata, 2048K init, 405K bss, 29936K reserved, 65536K cma-reserved, 196608K highmem)
  84. [ 0.000000] Virtual kernel memory layout:
  85. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  86. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  87. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  88. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  89. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  90. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  91. [ 0.000000] .text : 0xc0208000 - 0xc0e00000 (12256 kB)
  92. [ 0.000000] .init : 0xc1300000 - 0xc1500000 (2048 kB)
  93. [ 0.000000] .data : 0xc1500000 - 0xc1687928 (1567 kB)
  94. [ 0.000000] .bss : 0xc1691364 - 0xc16f69ec ( 406 kB)
  95. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  96. [ 0.000000] Hierarchical RCU implementation.
  97. [ 0.000000] RCU event tracing is enabled.
  98. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
  99. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  100. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  101. [ 0.000000] L2C-310 errata 752271 769419 enabled
  102. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  103. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  104. [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
  105. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  106. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  107. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
  108. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  109. [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  110. [ 0.000024] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  111. [ 0.003604] Console: colour dummy device 80x30
  112. [ 0.003638] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  113. [ 0.003653] pid_max: default: 32768 minimum: 301
  114. [ 0.003759] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  115. [ 0.003773] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  116. [ 0.004317] CPU: Testing write buffer coherency: ok
  117. [ 0.004636] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  118. [ 0.004941] Setting up static identity map for 0x10300000 - 0x103000a0
  119. [ 0.006753] Hierarchical SRCU implementation.
  120. [ 0.009342] EFI services will not be available.
  121. [ 0.009490] smp: Bringing up secondary CPUs ...
  122. [ 0.010051] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  123. [ 0.010693] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  124. [ 0.011319] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  125. [ 0.011407] smp: Brought up 1 node, 4 CPUs
  126. [ 0.011427] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  127. [ 0.011434] CPU: All CPU(s) started in SVC mode.
  128. [ 0.012289] devtmpfs: initialized
  129. [ 0.019492] random: get_random_u32 called from bucket_table_alloc+0x110/0x23c with crng_init=0
  130. [ 0.019694] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  131. [ 0.020126] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  132. [ 0.020147] futex hash table entries: 1024 (order: 4, 65536 bytes)
  133. [ 0.023237] pinctrl core: initialized pinctrl subsystem
  134. [ 0.024808] DMI not present or invalid.
  135. [ 0.025096] NET: Registered protocol family 16
  136. [ 0.027459] DMA: preallocated 256 KiB pool for atomic coherent allocations
  137. [ 0.029730] cpuidle: using governor menu
  138. [ 0.030019] CPU identified as i.MX6Q, silicon rev 1.5
  139. [ 0.037625] vdd1p1: supplied by regulator-dummy
  140. [ 0.038128] vdd3p0: supplied by regulator-dummy
  141. [ 0.038554] vdd2p5: supplied by regulator-dummy
  142. [ 0.038981] vddarm: supplied by regulator-dummy
  143. [ 0.039493] vddpu: supplied by regulator-dummy
  144. [ 0.039954] vddsoc: supplied by regulator-dummy
  145. [ 0.051391] No ATAGs?
  146. [ 0.051528] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  147. [ 0.051541] hw-breakpoint: maximum watchpoint size is 4 bytes.
  148. [ 0.054264] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  149. [ 0.058185] Serial: AMBA PL011 UART driver
  150. [ 0.079429] mxs-dma 110000.dma-apbh: initialized
  151. [ 0.080829] AT91: Could not find identification node
  152. [ 0.085964] vgaarb: loaded
  153. [ 0.086710] SCSI subsystem initialized
  154. [ 0.087078] usbcore: registered new interface driver usbfs
  155. [ 0.087123] usbcore: registered new interface driver hub
  156. [ 0.087178] usbcore: registered new device driver usb
  157. [ 0.088688] pps_core: LinuxPPS API ver. 1 registered
  158. [ 0.088697] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  159. [ 0.088717] PTP clock support registered
  160. [ 0.088907] EDAC MC: Ver: 3.0.0
  161. [ 0.089182] dmi: Firmware registration failed.
  162. [ 0.091083] clocksource: Switched to clocksource mxc_timer1
  163. [ 0.143906] NET: Registered protocol family 2
  164. [ 0.144410] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  165. [ 0.144488] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  166. [ 0.144613] TCP: Hash tables configured (established 8192 bind 8192)
  167. [ 0.144746] UDP hash table entries: 512 (order: 2, 16384 bytes)
  168. [ 0.144795] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  169. [ 0.144959] NET: Registered protocol family 1
  170. [ 0.145381] RPC: Registered named UNIX socket transport module.
  171. [ 0.145391] RPC: Registered udp transport module.
  172. [ 0.145398] RPC: Registered tcp transport module.
  173. [ 0.145405] RPC: Registered tcp NFSv4.1 backchannel transport module.
  174. [ 0.146240] hw perfevents: no interrupt-affinity property for /soc/pmu, guessing.
  175. [ 0.146447] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  176. [ 0.148309] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  177. [ 0.153256] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  178. [ 0.153795] NFS: Registering the id_resolver key type
  179. [ 0.153825] Key type id_resolver registered
  180. [ 0.153832] Key type id_legacy registered
  181. [ 0.153870] ntfs: driver 2.1.32 [Flags: R/O].
  182. [ 0.155231] bounce: pool size: 64 pages
  183. [ 0.155278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  184. [ 0.155290] io scheduler noop registered
  185. [ 0.155298] io scheduler deadline registered
  186. [ 0.155495] io scheduler cfq registered (default)
  187. [ 0.155506] io scheduler mq-deadline registered
  188. [ 0.155514] io scheduler kyber registered
  189. [ 0.186764] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
  190. [ 0.186783] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
  191. [ 0.228608] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  192. [ 0.231246] SuperH (H)SCI(F) driver initialized
  193. [ 0.232214] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 67, base_baud = 5000000) is a IMX
  194. [ 0.971963] console [ttymxc1] enabled
  195. [ 0.976164] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 68, base_baud = 5000000) is a IMX
  196. [ 0.985762] msm_serial: driver initialized
  197. [ 0.990071] STMicroelectronics ASC driver initialized
  198. [ 1.009902] brd: module loaded
  199. [ 1.019545] loop: module loaded
  200. [ 1.032226] libphy: Fixed MDIO Bus: probed
  201. [ 1.037208] CAN device driver interface
  202. [ 1.042086] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  203. [ 1.050467] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  204. [ 1.056337] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  205. [ 1.062321] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  206. [ 1.069287] igb: Copyright (c) 2007-2014 Intel Corporation.
  207. [ 1.078876] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  208. [ 1.086345] usbcore: registered new interface driver pegasus
  209. [ 1.092059] usbcore: registered new interface driver asix
  210. [ 1.097490] usbcore: registered new interface driver ax88179_178a
  211. [ 1.103631] usbcore: registered new interface driver cdc_ether
  212. [ 1.109509] usbcore: registered new interface driver smsc75xx
  213. [ 1.115335] usbcore: registered new interface driver smsc95xx
  214. [ 1.121134] usbcore: registered new interface driver net1080
  215. [ 1.126823] usbcore: registered new interface driver cdc_subset
  216. [ 1.132793] usbcore: registered new interface driver zaurus
  217. [ 1.138418] usbcore: registered new interface driver cdc_ncm
  218. [ 1.146184] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  219. [ 1.152738] ehci-pci: EHCI PCI platform driver
  220. [ 1.157223] ehci-platform: EHCI generic platform driver
  221. [ 1.162711] ehci-orion: EHCI orion driver
  222. [ 1.166898] SPEAr-ehci: EHCI SPEAr driver
  223. [ 1.171079] ehci-st: EHCI STMicroelectronics driver
  224. [ 1.176110] ehci-exynos: EHCI EXYNOS driver
  225. [ 1.180467] ehci-atmel: EHCI Atmel driver
  226. [ 1.184646] tegra-ehci: Tegra EHCI driver
  227. [ 1.188834] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  228. [ 1.195050] ohci-pci: OHCI PCI platform driver
  229. [ 1.199537] ohci-platform: OHCI generic platform driver
  230. [ 1.205010] SPEAr-ohci: OHCI SPEAr driver
  231. [ 1.209175] ohci-st: OHCI STMicroelectronics driver
  232. [ 1.214225] ohci-atmel: OHCI Atmel driver
  233. [ 1.219039] usbcore: registered new interface driver usb-storage
  234. [ 1.235913] ci_hdrc ci_hdrc.1: EHCI Host Controller
  235. [ 1.240827] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  236. [ 1.271093] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  237. [ 1.277129] hub 1-0:1.0: USB hub found
  238. [ 1.280921] hub 1-0:1.0: 1 port detected
  239. [ 1.289770] i2c /dev entries driver
  240. [ 1.296683] IR NEC protocol handler initialized
  241. [ 1.301240] IR RC5(x/sz) protocol handler initialized
  242. [ 1.306296] IR RC6 protocol handler initialized
  243. [ 1.310828] IR JVC protocol handler initialized
  244. [ 1.315377] IR Sony protocol handler initialized
  245. [ 1.319999] IR SANYO protocol handler initialized
  246. [ 1.324718] IR Sharp protocol handler initialized
  247. [ 1.329426] IR MCE Keyboard/mouse protocol handler initialized
  248. [ 1.335277] IR XMP protocol handler initialized
  249. [ 1.346463] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
  250. [ 1.356886] sdhci: Secure Digital Host Controller Interface driver
  251. [ 1.363101] sdhci: Copyright(c) Pierre Ossman
  252. [ 1.369222] Synopsys Designware Multimedia Card Interface Driver
  253. [ 1.376696] sdhci-pltfm: SDHCI platform and OF driver helper
  254. [ 1.383181] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
  255. [ 1.451212] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
  256. [ 1.461630] ledtrig-cpu: registered to indicate activity on CPUs
  257. [ 1.467957] usbcore: registered new interface driver usbhid
  258. [ 1.473557] usbhid: USB HID core driver
  259. [ 1.481514] NET: Registered protocol family 10
  260. [ 1.486710] Segment Routing with IPv6
  261. [ 1.490446] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  262. [ 1.496893] NET: Registered protocol family 17
  263. [ 1.501381] can: controller area network core (rev 20170425 abi 9)
  264. [ 1.507615] NET: Registered protocol family 29
  265. [ 1.512080] can: raw protocol (rev 20170425)
  266. [ 1.516355] can: broadcast manager protocol (rev 20170425 t)
  267. [ 1.522039] can: netlink gateway (rev 20170425) max_hops=1
  268. [ 1.527843] Key type dns_resolver registered
  269. [ 1.533837] ThumbEE CPU extension supported.
  270. [ 1.538124] Registering SWP/SWPB emulation handler
  271. [ 1.557536] hctosys: unable to open rtc device (rtc0)
  272. [ 1.578816] mmc0: host does not support reading read-only switch, assuming write-enable
  273. [ 1.592950] mmc0: new high speed SDHC card at address 1234
  274. [ 1.598753] mmcblk0: mmc0:1234 SA08G 7.25 GiB
  275. [ 1.604479] mmcblk0: p1
  276. [ 14.071296] usb_otg_vbus: disabling
  277. [ 14.074799] flexcan1-reg: disabling
  278. [ 14.078297] lcd_3v3: disabling
  279. [ 14.081381] VCC_CAM0: disabling
  280. [ 14.084533] display: disabling
  281. [ 109.911708] VFS: Unable to mount root fs via NFS, trying floppy.
  282. [ 109.918038] VFS: Cannot open root device "(null)" or unknown-block(2,0): error -6
  283. [ 109.925552] Please append a correct "root=" boot option; here are the available partitions:
  284. [ 109.933928] 0100 65536 ram0
  285. [ 109.933932] (driver?)
  286. [ 109.940048] 0101 65536 ram1
  287. [ 109.940052] (driver?)
  288. [ 109.946180] 0102 65536 ram2
  289. [ 109.946184] (driver?)
  290. [ 109.952312] 0103 65536 ram3
  291. [ 109.952317] (driver?)
  292. [ 109.958430] 0104 65536 ram4
  293. [ 109.958433] (driver?)
  294. [ 109.964561] 0105 65536 ram5
  295. [ 109.964565] (driver?)
  296. [ 109.970677] 0106 65536 ram6
  297. [ 109.970681] (driver?)
  298. [ 109.976808] 0107 65536 ram7
  299. [ 109.976811] (driver?)
  300. [ 109.982936] 0108 65536 ram8
  301. [ 109.982941] (driver?)
  302. [ 109.989054] 0109 65536 ram9
  303. [ 109.989058] (driver?)
  304. [ 109.995183] 010a 65536 ram10
  305. [ 109.995188] (driver?)
  306. [ 110.001402] 010b 65536 ram11
  307. [ 110.001407] (driver?)
  308. [ 110.007607] 010c 65536 ram12
  309. [ 110.007611] (driver?)
  310. [ 110.013823] 010d 65536 ram13
  311. [ 110.013827] (driver?)
  312. [ 110.020025] 010e 65536 ram14
  313. [ 110.020029] (driver?)
  314. [ 110.026242] 010f 65536 ram15
  315. [ 110.026245] (driver?)
  316. [ 110.032464] b300 7598080 mmcblk0
  317. [ 110.032469] driver: mmcblk
  318. [ 110.039277] b301 21939 mmcblk0p1 00c6de9f-01
  319. [ 110.039281]
  320. [ 110.046101] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
  321. [ 110.054371] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.14.39-stable-student #1
  322. [ 110.061684] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  323. [ 110.068242] [<c0311a9c>] (unwind_backtrace) from [<c030ca4c>] (show_stack+0x10/0x14)
  324. [ 110.076002] [<c030ca4c>] (show_stack) from [<c0d14f44>] (dump_stack+0x8c/0xa0)
  325. [ 110.083245] [<c0d14f44>] (dump_stack) from [<c03421d8>] (panic+0xdc/0x260)
  326. [ 110.090139] [<c03421d8>] (panic) from [<c13011f0>] (mount_block_root+0x194/0x268)
  327. [ 110.097634] [<c13011f0>] (mount_block_root) from [<c13014d0>] (mount_root+0x120/0x128)
  328. [ 110.105563] [<c13014d0>] (mount_root) from [<c1301654>] (prepare_namespace+0x17c/0x1c4)
  329. [ 110.113576] [<c1301654>] (prepare_namespace) from [<c1300e34>] (kernel_init_freeable+0x1c0/0x1d0)
  330. [ 110.122464] [<c1300e34>] (kernel_init_freeable) from [<c0d29538>] (kernel_init+0x8/0x110)
  331. [ 110.130658] [<c0d29538>] (kernel_init) from [<c0308288>] (ret_from_fork+0x14/0x2c)
  332. [ 110.138240] CPU1: stopping
  333. [ 110.140959] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.39-stable-student #1
  334. [ 110.148271] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  335. [ 110.154816] [<c0311a9c>] (unwind_backtrace) from [<c030ca4c>] (show_stack+0x10/0x14)
  336. [ 110.162569] [<c030ca4c>] (show_stack) from [<c0d14f44>] (dump_stack+0x8c/0xa0)
  337. [ 110.169802] [<c0d14f44>] (dump_stack) from [<c03101d4>] (handle_IPI+0x348/0x368)
  338. [ 110.177208] [<c03101d4>] (handle_IPI) from [<c03017a4>] (gic_handle_irq+0x98/0x9c)
  339. [ 110.184787] [<c03017a4>] (gic_handle_irq) from [<c030d60c>] (__irq_svc+0x6c/0x90)
  340. [ 110.192273] Exception stack(0xee8dff70 to 0xee8dffb8)
  341. [ 110.197332] ff60: 00000000 00000e3c 00000000 ee8de000
  342. [ 110.205515] ff80: ffffe000 c1503ccc c1684678 c144f2f8 c1683a20 412fc09a 00000000 00000000
  343. [ 110.213697] ffa0: 00000001 ee8dffc0 c03a0280 c0d2f2bc 60000013 ffffffff
  344. [ 110.220324] [<c030d60c>] (__irq_svc) from [<c0d2f2bc>] (cpu_idle_poll+0x5c/0x1f0)
  345. [ 110.227817] [<c0d2f2bc>] (cpu_idle_poll) from [<c037ddb4>] (do_idle+0x50/0x200)
  346. [ 110.235136] [<c037ddb4>] (do_idle) from [<c037e1dc>] (cpu_startup_entry+0x18/0x1c)
  347. [ 110.242714] [<c037e1dc>] (cpu_startup_entry) from [<10301f8c>] (0x10301f8c)
  348. [ 110.249680] CPU3: stopping
  349. [ 110.252399] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.39-stable-student #1
  350. [ 110.259711] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  351. [ 110.266254] [<c0311a9c>] (unwind_backtrace) from [<c030ca4c>] (show_stack+0x10/0x14)
  352. [ 110.274009] [<c030ca4c>] (show_stack) from [<c0d14f44>] (dump_stack+0x8c/0xa0)
  353. [ 110.281240] [<c0d14f44>] (dump_stack) from [<c03101d4>] (handle_IPI+0x348/0x368)
  354. [ 110.288646] [<c03101d4>] (handle_IPI) from [<c03017a4>] (gic_handle_irq+0x98/0x9c)
  355. [ 110.296222] [<c03017a4>] (gic_handle_irq) from [<c030d60c>] (__irq_svc+0x6c/0x90)
  356. [ 110.303707] Exception stack(0xee8e3f70 to 0xee8e3fb8)
  357. [ 110.308766] 3f60: 00000000 00000330 00000000 00000001
  358. [ 110.316950] 3f80: ffffe000 c1503ccc c1684678 c144f2f8 c1683a20 412fc09a 00000000 00000000
  359. [ 110.325133] 3fa0: 00000001 ee8e3fc0 c03a0280 c0d2f2ac 20000013 ffffffff
  360. [ 110.331758] [<c030d60c>] (__irq_svc) from [<c0d2f2ac>] (cpu_idle_poll+0x4c/0x1f0)
  361. [ 110.339248] [<c0d2f2ac>] (cpu_idle_poll) from [<c037ddb4>] (do_idle+0x50/0x200)
  362. [ 110.346563] [<c037ddb4>] (do_idle) from [<c037e1dc>] (cpu_startup_entry+0x18/0x1c)
  363. [ 110.354139] [<c037e1dc>] (cpu_startup_entry) from [<10301f8c>] (0x10301f8c)
  364. [ 110.361104] CPU0: stopping
  365. [ 110.363824] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.39-stable-student #1
  366. [ 110.371137] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  367. [ 110.377679] [<c0311a9c>] (unwind_backtrace) from [<c030ca4c>] (show_stack+0x10/0x14)
  368. [ 110.385433] [<c030ca4c>] (show_stack) from [<c0d14f44>] (dump_stack+0x8c/0xa0)
  369. [ 110.392664] [<c0d14f44>] (dump_stack) from [<c03101d4>] (handle_IPI+0x348/0x368)
  370. [ 110.400068] [<c03101d4>] (handle_IPI) from [<c03017a4>] (gic_handle_irq+0x98/0x9c)
  371. [ 110.407644] [<c03017a4>] (gic_handle_irq) from [<c030d60c>] (__irq_svc+0x6c/0x90)
  372. [ 110.415129] Exception stack(0xc1501f38 to 0xc1501f80)
  373. [ 110.420184] 1f20: 00000000 0000082c
  374. [ 110.428368] 1f40: 00000000 00000001 ffffe000 c1503ccc c1684678 c144f2f8 c1683a20 efffc900
  375. [ 110.436551] 1f60: c13cba30 00000000 00000001 c1501f88 c03a0280 c0d2f2c4 60000013 ffffffff
  376. [ 110.444737] [<c030d60c>] (__irq_svc) from [<c0d2f2c4>] (cpu_idle_poll+0x64/0x1f0)
  377. [ 110.452228] [<c0d2f2c4>] (cpu_idle_poll) from [<c037ddb4>] (do_idle+0x50/0x200)
  378. [ 110.459543] [<c037ddb4>] (do_idle) from [<c037e1dc>] (cpu_startup_entry+0x18/0x1c)
  379. [ 110.467121] [<c037e1dc>] (cpu_startup_entry) from [<c1300c68>] (start_kernel+0x394/0x3a0)
  380. [ 110.475307] [<c1300c68>] (start_kernel) from [<1020807c>] (0x1020807c)
  381. [ 110.481845] Rebooting in 1 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!