Cisco 831 initialization output over console

C800/SOHO series (Board ID: 29-129) platform with 49152 Kbytes of main memory

program load complete, entry point: 0x80013000, size: 0x555924
Self decompressing the image : ############################################################################################################### [OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) C831 Software (C831-K9O3SY6-M), Version 12.2(13)ZH4, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Synched to technology version 12.2(14.5)T
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 24-Mar-04 17:54 by ealyon
Image text-base: 0x800131E8, data-base: 0x80AC8C94


Compliance with U.S. Export Laws and Regulations - Encryption

This product performs encryption and is regulated for export
by the U.S. Government.

This product is not authorized for use by persons located
outside the United States and Canada that do not have prior
approval from Cisco Systems, Inc. or the U.S. Government.

This product may not be exported outside the U.S. and Canada
either by physical or electronic means without PRIOR approval
of Cisco Systems, Inc. or the U.S. Government.

Persons outside the U.S. and Canada may not re-export, resell,
or transfer this product by either physical or electronic means
without  prior approval of Cisco Systems, Inc. or the U.S.
Government.

CISCO C831 (MPC857DSL) processor (revision 0x300) with 44237K/4915K bytes of memory.
Processor board ID AMB07440F1N (4227160357), with hardware revision 0000
CPU rev number 7
Bridging software.
2 Ethernet/IEEE 802.3 interface(s)
128K bytes of non-volatile configuration memory.
24576K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)


         --- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]:
/**
I've already done this once as per description.
**/

�ould you like to enter the initial configuration dialog? [yes/no]: no
�


Press RETURN to get started!

*Mar  1 00:00:06.235: %LINK-3-UPDOWN: Interface Ethernet1, changed state to up
*Mar  1 00:00:07.283: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet1, changed state to up
*Mar  1 00:00:18.179: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
*Mar  1 00:00:19.179: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to up
*Mar  1 00:00:19.179: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet1, changed state to down
*Mar  1 00:04:44.867: %LINK-5-CHANGED: Interface Ethernet0, changed state to administratively down
*Mar  1 00:04:44.867: %LINK-5-CHANGED: Interface Ethernet1, changed state to administratively down
*Mar  1 00:04:45.831: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C831 Software (C831-K9O3SY6-M), Version 12.2(13)ZH4, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Synched to technology version 12.2(14.5)T
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 24-Mar-04 17:54 by ealyon
*Mar  1 00:04:45.831: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
*Mar  1 00:04:50.259: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to down
Router>show run
             ^
% Invalid input detected at '^' marker.

Router>