Computer Craft RC Turtle Alpha - Computer

function RCPC()
 while true do
  local sEvent, par = os.pullEvent("key")
  if(sEvent == "key") then
   if(par == 17) then
    rednet.broadcast("RCF")
   elseif(par == 200) then
    rednet.broadcast("RCMF")
   elseif(par == 50) then
    rednet.broadcast("RCBF")
   elseif(par == 28) then
    rednet.broadcast("RCPF")
   elseif(par == 57) then
    rednet.broadcast("RCAF")
   elseif(par == 208) then
    rednet.broadcast("RCB")
   elseif(par == 203) then
    rednet.broadcast("RCL")
   elseif(par == 205) then
    rednet.broadcast("RCR")
   elseif(par == 21) then
    rednet.broadcast("RCU")
   elseif(par == 22) then
    rednet.broadcast("RCMU")
   elseif(par == 23) then
    rednet.broadcast("RCBU")
   elseif(par == 24) then
    rednet.broadcast("RCPU")
   elseif(par == 20) then
    rednet.broadcast("RCAU")
   elseif(par == 35) then
    rednet.broadcast("RCD")
   elseif(par == 36) then
    rednet.broadcast("RCMD")
   elseif(par == 37) then
    rednet.broadcast("RCBD")
   elseif(par == 38) then
    rednet.broadcast("RCPD")
   elseif(par == 34) then
    rednet.broadcast("RCAD")
   elseif(par == 2) then
    rednet.broadcast("RC1")
   elseif(par == 3) then
    rednet.broadcast("RC2")
   elseif(par == 4) then
    rednet.broadcast("RC3")
   elseif(par == 5) then
    rednet.broadcast("RC4")
   elseif(par == 6) then
    rednet.broadcast("RC5")
   elseif(par == 7) then
    rednet.broadcast("RC6")
   elseif(par == 8) then
    rednet.broadcast("RC7")
   elseif(par == 9) then
    rednet.broadcast("RC8")
   elseif(par == 19) then
    rednet.broadcast("RCRF")
   end
  end
 end
end
print("What side is your modem on?")
local mod = read()
rednet.open(mod)
term.clear()
print("Remote Turtle Initiated.")
print("Controls:")
print("Basic Movement:"
print("Move Forward - W        | Move Backward - S or Down")
print("Turn Left - A or Left   | Turn Right - D or Right")
print("Up - Y                  | Down - H")
print("Mine and Move:")
print("Forward - Up")
print("Up - U                  | Down - J")
print("Break Block:")
print("Forward - M")
print("Up - I                  | Down - K")
print("Place Block:")
print("Forward - Enter")
print("Up - O                  | Down - L")
print("Attack:")
print("Forward - Spacebar")
print("Up - T                  | Down - G")
print("Misc:")
print("Refuel (refuels 1 time, from slot 16 [the last one]) - R")
print("Select Slot (1-8) - 1-8 respectively (after refuelling, it goes to 1)")
RCPC()