Advertisement
doctech

WLE600VX iw wlan0 info, iw list

Mar 25th, 2015
1,038
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Awk 7.27 KB | None | 0 0
  1. who@who-desktop:~$
  2. who@who-desktop:~$
  3. who@who-desktop:~$ iw wlan0 info
  4. Interface wlan0
  5.     ifindex 3
  6.     wdev 0x1
  7.     addr 00:03:07:12:34:56
  8.     type managed
  9.     wiphy 0
  10.     channel 161 (5805 MHz), width: 40 MHz, center1: 5795 MHz
  11. who@who-desktop:~$
  12. who@who-desktop:~$
  13. who@who-desktop:~$ iw list
  14. Wiphy phy0
  15.     max # scan SSIDs: 16
  16.     max scan IEs length: 195 bytes
  17.     Retry short limit: 7
  18.     Retry long limit: 4
  19.     Coverage class: 0 (up to 0m)
  20.     Device supports AP-side u-APSD.
  21.     Supported Ciphers:
  22.         * WEP40 (00-0f-ac:1)
  23.         * WEP104 (00-0f-ac:5)
  24.         * TKIP (00-0f-ac:2)
  25.         * CCMP (00-0f-ac:4)
  26.         * CMAC (00-0f-ac:6)
  27.     Available Antennas: TX 0x7 RX 0x7
  28.     Configured Antennas: TX 0x7 RX 0x7
  29.     Supported interface modes:
  30.          * IBSS
  31.          * managed
  32.          * AP
  33.          * AP/VLAN
  34.          * monitor
  35.          * P2P-client
  36.          * P2P-GO
  37.     Band 1:
  38.         Capabilities: 0x19e3
  39.             RX LDPC
  40.             HT20/HT40
  41.             Static SM Power Save
  42.             RX HT20 SGI
  43.             RX HT40 SGI
  44.             TX STBC
  45.             RX STBC 1-stream
  46.             Max AMSDU length: 7935 bytes
  47.             DSSS/CCK HT40
  48.         Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  49.         Minimum RX AMPDU time spacing: 8 usec (0x06)
  50.         HT TX/RX MCS rate indexes supported: 0-15
  51.         Bitrates (non-HT):
  52.             * 1.0 Mbps
  53.             * 2.0 Mbps
  54.             * 5.5 Mbps
  55.             * 11.0 Mbps
  56.             * 6.0 Mbps
  57.             * 9.0 Mbps
  58.             * 12.0 Mbps
  59.             * 18.0 Mbps
  60.             * 24.0 Mbps
  61.             * 36.0 Mbps
  62.             * 48.0 Mbps
  63.             * 54.0 Mbps
  64.         Frequencies:
  65.             * 2412 MHz [1] (27.0 dBm)
  66.             * 2417 MHz [2] (27.0 dBm)
  67.             * 2422 MHz [3] (27.0 dBm)
  68.             * 2427 MHz [4] (27.0 dBm)
  69.             * 2432 MHz [5] (27.0 dBm)
  70.             * 2437 MHz [6] (27.0 dBm)
  71.             * 2442 MHz [7] (27.0 dBm)
  72.             * 2447 MHz [8] (27.0 dBm)
  73.             * 2452 MHz [9] (27.0 dBm)
  74.             * 2457 MHz [10] (27.0 dBm)
  75.             * 2462 MHz [11] (27.0 dBm)
  76.             * 2467 MHz [12] (disabled)
  77.             * 2472 MHz [13] (disabled)
  78.             * 2484 MHz [14] (disabled)
  79.     Band 2:
  80.         Capabilities: 0x19e3
  81.             RX LDPC
  82.             HT20/HT40
  83.             Static SM Power Save
  84.             RX HT20 SGI
  85.             RX HT40 SGI
  86.             TX STBC
  87.             RX STBC 1-stream
  88.             Max AMSDU length: 7935 bytes
  89.             DSSS/CCK HT40
  90.         Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  91.         Minimum RX AMPDU time spacing: 8 usec (0x06)
  92.         HT TX/RX MCS rate indexes supported: 0-15
  93.         VHT Capabilities (0x338001b2):
  94.             Max MPDU length: 11454
  95.             Supported Channel Width: neither 160 nor 80+80
  96.             RX LDPC
  97.             short GI (80 MHz)
  98.             TX STBC
  99.             RX antenna pattern consistency
  100.             TX antenna pattern consistency
  101.         VHT RX MCS set:
  102.             1 streams: MCS 0-9
  103.             2 streams: MCS 0-9
  104.             3 streams: not supported
  105.             4 streams: not supported
  106.             5 streams: not supported
  107.             6 streams: not supported
  108.             7 streams: not supported
  109.             8 streams: not supported
  110.         VHT RX highest supported: 0 Mbps
  111.         VHT TX MCS set:
  112.             1 streams: MCS 0-9
  113.             2 streams: MCS 0-9
  114.             3 streams: not supported
  115.             4 streams: not supported
  116.             5 streams: not supported
  117.             6 streams: not supported
  118.             7 streams: not supported
  119.             8 streams: not supported
  120.         VHT TX highest supported: 0 Mbps
  121.         Bitrates (non-HT):
  122.             * 6.0 Mbps
  123.             * 9.0 Mbps
  124.             * 12.0 Mbps
  125.             * 18.0 Mbps
  126.             * 24.0 Mbps
  127.             * 36.0 Mbps
  128.             * 48.0 Mbps
  129.             * 54.0 Mbps
  130.         Frequencies:
  131.             * 5180 MHz [36] (17.0 dBm)
  132.             * 5200 MHz [40] (17.0 dBm)
  133.             * 5220 MHz [44] (17.0 dBm)
  134.             * 5240 MHz [48] (17.0 dBm)
  135.             * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
  136.               DFS state: usable (for 5459 sec)
  137.               DFS CAC time: 60000 ms
  138.             * 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
  139.               DFS state: usable (for 5459 sec)
  140.               DFS CAC time: 60000 ms
  141.             * 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
  142.               DFS state: usable (for 5459 sec)
  143.               DFS CAC time: 60000 ms
  144.             * 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
  145.               DFS state: usable (for 5459 sec)
  146.               DFS CAC time: 60000 ms
  147.             * 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
  148.               DFS state: usable (for 5459 sec)
  149.               DFS CAC time: 60000 ms
  150.             * 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
  151.               DFS state: usable (for 5459 sec)
  152.               DFS CAC time: 60000 ms
  153.             * 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
  154.               DFS state: usable (for 5459 sec)
  155.               DFS CAC time: 60000 ms
  156.             * 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
  157.               DFS state: usable (for 5459 sec)
  158.               DFS CAC time: 60000 ms
  159.             * 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
  160.               DFS state: usable (for 5459 sec)
  161.               DFS CAC time: 60000 ms
  162.             * 5600 MHz [120] (disabled)
  163.             * 5620 MHz [124] (disabled)
  164.             * 5640 MHz [128] (disabled)
  165.             * 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
  166.               DFS state: usable (for 5459 sec)
  167.               DFS CAC time: 60000 ms
  168.             * 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
  169.               DFS state: usable (for 5459 sec)
  170.               DFS CAC time: 60000 ms
  171.             * 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
  172.               DFS state: usable (for 5459 sec)
  173.               DFS CAC time: 60000 ms
  174.             * 5745 MHz [149] (30.0 dBm)
  175.             * 5765 MHz [153] (30.0 dBm)
  176.             * 5785 MHz [157] (30.0 dBm)
  177.             * 5805 MHz [161] (30.0 dBm)
  178.             * 5825 MHz [165] (30.0 dBm)
  179.     Supported commands:
  180.          * new_interface
  181.          * set_interface
  182.          * new_key
  183.          * start_ap
  184.          * new_station
  185.          * new_mpath
  186.          * set_mesh_config
  187.          * set_bss
  188.          * authenticate
  189.          * associate
  190.          * deauthenticate
  191.          * disassociate
  192.          * join_ibss
  193.          * join_mesh
  194.          * remain_on_channel
  195.          * set_tx_bitrate_mask
  196.          * frame
  197.          * frame_wait_cancel
  198.          * set_wiphy_netns
  199.          * set_channel
  200.          * set_wds_peer
  201.          * probe_client
  202.          * set_noack_map
  203.          * register_beacons
  204.          * start_p2p_device
  205.          * set_mcast_rate
  206.          * channel_switch
  207.          * Unknown command (104)
  208.          * connect
  209.          * disconnect
  210.     Supported TX frame types:
  211.          * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  212.          * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  213.          * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  214.          * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  215.          * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  216.          * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  217.          * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  218.          * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  219.     Supported RX frame types:
  220.          * IBSS: 0x40 0xb0 0xc0 0xd0
  221.          * managed: 0x40 0xd0
  222.          * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  223.          * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  224.          * mesh point: 0xb0 0xc0 0xd0
  225.          * P2P-client: 0x40 0xd0
  226.          * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  227.          * P2P-device: 0x40 0xd0
  228.     software interface modes (can always be added):
  229.          * AP/VLAN
  230.          * monitor
  231.     valid interface combinations:
  232.          * #{ managed, P2P-client } <= 8, #{ P2P-GO } <= 3, #{ AP } <= 7,
  233.            total <= 8, #channels <= 1, STA/AP BI must match
  234.     HT Capability overrides:
  235.          * MCS: ff ff ff ff ff ff ff ff ff ff
  236.          * maximum A-MSDU length
  237.          * supported channel width
  238.          * short GI for 40 MHz
  239.          * max A-MPDU length exponent
  240.          * min MPDU start spacing
  241.     Device supports TX status socket option.
  242.     Device supports HT-IBSS.
  243.     Device supports SAE with AUTHENTICATE command
  244.     Device supports scan flush.
  245.     Device supports per-vif TX power setting
  246.     Driver supports a userspace MPM
  247.     Device supports static SMPS
  248. who@who-desktop:~$
  249. who@who-desktop:~$
  250. who@who-desktop:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement