Advertisement
teknoraver

creator ci20

Oct 22nd, 2014
567
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.83 KB | None | 0 0
  1. Initializing cgroup subsys cpuset
  2. Initializing cgroup subsys cpu
  3. Linux version 3.0.8-00094-gb4f0297c4d84 (asmith@asmith-linux) (gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-66) ) #1 SMP PREEMPT Wed Jun 25 12:25:25 BST 2014
  4. CPU0: reset EPC:F4F14BA7
  5. bootconsole [early0] enabled
  6. CPU revision is: 3ee1024f (Ingenic Xburst)
  7. FPU revision is: 00330000
  8. setup_priority: BUS--0x13000000, TARGET--0x6, VALUE--0x3
  9. setup_priority: VALUE after setup--0xc0
  10. setup_priority: BUS--0x13400000, TARGET--0xa, VALUE--0x3
  11. setup_priority: VALUE after setup--0xc00
  12. CCLK:1200MHz L2CLK:600Mhz H0CLK:400MHz H2CLK:200Mhz PCLK:100Mhz
  13. Determined physical RAM map:
  14. User-defined physical RAM map:
  15. memory: 10000000 @ 00000000 (usable)
  16. memory: 30000000 @ 30000000 (usable)
  17. Initrd not found or empty - disabling initrd
  18. Zone PFN ranges:
  19. Normal 0x00000000 -> 0x00020000
  20. HighMem 0x00020000 -> 0x00060000
  21. Movable zone start PFN for each node
  22. early_node_map[2] active PFN ranges
  23. 0: 0x00000000 -> 0x00010000
  24. 0: 0x00030000 -> 0x00060000
  25. On node 0 totalpages: 262144
  26. free_area_init_node: node 0, pgdat 80791be0, node_mem_map 81000000
  27. Normal zone: 1024 pages used for memmap
  28. Normal zone: 0 pages reserved
  29. Normal zone: 64512 pages, LIFO batch:15
  30. HighMem zone: 2048 pages used for memmap
  31. HighMem zone: 194560 pages, LIFO batch:31
  32. [SMP] Slave CPU(s) 1 available.
  33. PERCPU: Embedded 7 pages/cpu @81c07000 s5408 r8192 d15072 u32768
  34. pcpu-alloc: s5408 r8192 d15072 u32768 alloc=8*4096
  35. pcpu-alloc: [0] 0 [0] 1
  36. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259072
  37. Kernel command line: console=ttyS0,115200 console=tty0 mem=256M@0x0 mem=768M@0x30000000 ubi.mtd=1 root=ubi0:root rootfstype=ubifs rw
  38. PID hash table entries: 1024 (order: 0, 4096 bytes)
  39. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  40. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  41. Primary instruction cache 32kB, VIPT, 8-way, linesize 32 bytes.
  42. Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
  43. allocated 6291456 bytes of page_cgroup
  44. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  45. Memory: 1021440k/262144k available (6078k kernel code, 27136k reserved, 1620k data, 232k init, 786432k highmem)
  46. SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  47. Preemptible hierarchical RCU implementation.
  48. NR_IRQS:376
  49. Console: colour dummy device 80x25
  50. console [tty0] enabled, bootconsole disabled
  51. Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
  52. pid_max: default: 32768 minimum: 301
  53. Mount-cache hash table entries: 512
  54. Initializing cgroup subsys cpuacct
  55. Initializing cgroup subsys memory
  56. Initializing cgroup subsys devices
  57. Initializing cgroup subsys freezer
  58. Initializing cgroup subsys blkio
  59. CPU1: reset EPC:CFB555DE
  60. CPU revision is: 3ee1024f (Ingenic Xburst)
  61. FPU revision is: 00330100
  62. Primary instruction cache 32kB, VIPT, 8-way, linesize 32 bytes.
  63. Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
  64. Brought up 2 CPUs
  65. [SMP] slave cpu1 start up finished.
  66. devtmpfs: initialized
  67. print_constraints: dummy:
  68. NET: Registered protocol family 16
  69. gpemc: SoC-jz4780 gpemc support functions initilized.
  70. jz4780-bch jz4780-bch.0: SoC-jz4780 HW ECC-BCH support functions initialized.
  71. GPIO sleep states:
  72. OH:00000000 OL:00000000 IP:8700ff00 IN:080000ff
  73. OH:00000000 OL:0e8fffc0 IP:f1300000 IN:00400030
  74. OH:00000000 OL:0fffffff IP:f0000000 IN:00000000
  75. OH:00002000 OL:00000209 IP:3c015000 IN:c3fe8d00
  76. OH:00000000 OL:00000041 IP:0f0ffb20 IN:c0f00096
  77. OH:00000000 OL:00e40680 IP:fc00d97f IN:03130000
  78. jz_platform_init--->dmmu
  79. bio: create slab <bio-0> at 0
  80. jz-dma jz-dma: JZ SoC DMA initialized
  81. SCSI subsystem initialized
  82. usbcore: registered new interface driver usbfs
  83. usbcore: registered new interface driver hub
  84. usbcore: registered new device driver usb
  85. i2c-gpio i2c-gpio.0: using pins 126 (SDA) and 127 (SCL)
  86. i2c-gpio i2c-gpio.2: using pins 176 (SDA) and 177 (SCL)
  87. i2c-gpio i2c-gpio.4: using pins 140 (SDA) and 141 (SCL)
  88. jz-i2c jz-i2c.1: probe i2c1------>i2c1 i2c->speed 100
  89. jz-i2c jz-i2c.3: probe i2c3------>i2c3 i2c->speed 100
  90. Advanced Linux Sound Architecture Driver Version 1.0.24.
  91. Bluetooth: Core ver 2.16
  92. NET: Registered protocol family 31
  93. Bluetooth: HCI device and connection manager initialized
  94. Bluetooth: HCI socket layer initialized
  95. Bluetooth: L2CAP socket layer initialized
  96. Bluetooth: SCO socket layer initialized
  97. cfg80211: Calling CRDA to update world regulatory domain
  98. print_constraints: Vcc-5V: 5000 mV
  99. reg-fixed-voltage reg-fixed-voltage.0: Vcc-5V supplying 5000000uV
  100. print_constraints: ethnet: 3300 mV
  101. reg-fixed-voltage reg-fixed-voltage.1: ethnet supplying 3300000uV
  102. act8600 0-005a: register regulator:OUT1
  103. print_constraints: Core: 1000 <--> 1400 mV at 1200 mV
  104. act8600 0-005a: register regulator:OUT3
  105. print_constraints: Vcc-IO: 3300 mV
  106. act8600 0-005a: register regulator:OUT4
  107. print_constraints: OTG-Vbus: 5000 mV
  108. act8600 0-005a: register regulator:OUT6
  109. print_constraints: Wi-Fi: 3300 mV
  110. act8600 0-005a: register regulator:OUT7
  111. print_constraints: Camera2.8: 2800 mV
  112. act8600 0-005a: register regulator:OUT8
  113. print_constraints: Camera1.8: 1500 mV
  114. act8600 0-005a: register regulator:VBUS
  115. print_constraints: Vbus:
  116. print_constraints: USB Charger: 400 <--> 800 mA at 400 mA
  117. Switching to clocksource jz_clocksource
  118. Switched to NOHz mode on CPU #0
  119. DWC IN OTG MODE
  120. init PHY
  121. Switched to NOHz mode on CPU #1
  122. dwc2 dwc2: Keep PHY ON
  123. dwc2 dwc2: Using Buffer DMA mode
  124. dwc2 dwc2: Core Release: 3.00a
  125. dwc2 dwc2: Total FIFO SZ=3576
  126. dwc2 dwc2: Rx FIFO SZ=3648
  127. dwc2 dwc2: NP Tx FIFO SZ=3648
  128. dwc2 dwc2: Architecture: External DMA
  129. dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller
  130. dwc2 dwc2: new USB bus registered, assigned bus number 1
  131. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  132. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  133. usb usb1: Product: DesignWare USB2.0 High-Speed Host Controller
  134. usb usb1: Manufacturer: Linux 3.0.8-00094-gb4f0297c4d84 dwc2-hcd
  135. usb usb1: SerialNumber: dwc2
  136. hub 1-0:1.0: USB hub found
  137. hub 1-0:1.0: 1 port detected
  138. dwc2 dwc2: set feature 8
  139. dwc2 dwc2: DWC2 Host Initialized
  140. USB disconnect
  141. dwc2 dwc2: enter dwc2_gadget_plug_change:2410: plugin = 0 pullup = 0 suspend = 0 ext_vbus = 0
  142. NET: Registered protocol family 2
  143. IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
  144. TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  145. TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
  146. TCP: Hash tables configured (established 32768 bind 32768)
  147. TCP reno registered
  148. UDP hash table entries: 128 (order: 0, 4096 bytes)
  149. UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
  150. NET: Registered protocol family 1
  151. Total 33MB memory at 0xe000000 was reserved for IPU
  152. Total 16MB memory1 at 0xd000000 was reserved for IPU
  153. highmem bounce pool size: 64 pages
  154. ashmem: initialized
  155. JFFS2 version 2.2. (NAND) \xffffffc2\xffffffa9\xffffffa9 2001-2006 Red Hat, Inc.
  156. fuse init (API version 7.16)
  157. yaffs: yaffs built Jun 25 2014 12:21:16 Installing.
  158. msgmni has been set to 459
  159. io scheduler noop registered
  160. io scheduler deadline registered
  161. io scheduler cfq registered (default)
  162. jz-fb jz-fb.0: Frame buffer size: 24887296 bytes
  163. graphics fb0: open count : 1
  164. dwc2 dwc2: ID PIN CHANGED!
  165. dwc2 dwc2: Total FIFO SZ=3576
  166. dwc2 dwc2: Rx FIFO SZ=3648
  167. dwc2 dwc2: NP Tx FIFO SZ=3648
  168. dwc2 dwc2: Architecture: External DMA
  169. ===> warning, wait lcd sof failed, please check, if enable sof in xboot
  170. jz-fb jz-fb.0: LCDC: PixClock:148500000
  171. jz-fb jz-fb.0: LCDC: PixClock:148000000(real)
  172. Console: switching to colour frame buffer device 240x67
  173. ===> warning, wait lcd sof failed, please check, if enable sof in xboot
  174. jz-fb jz-fb.0: LCDC: PixClock = 148500000
  175. jz-fb jz-fb.0: LCDC: PixClock = 148000000(real)
  176. (NULL device *): jzfb_check_var get video mode failed
  177. jz-fb jz-fb.1: Not allocate frame buffer
  178. jz-aosd jz-aosd: Frame buffer support AOSD
  179. api_Initialize: dwc_hdmi_tx_software_api_2.12
  180. api_Initialize: Jun 25 2014
  181. api_Initialize: Product Line, 0xa0
  182. api_Initialize: Product Type, 0xc1
  183. api_Initialize: HDMI TX Controller Design, 0x13
  184. api_Initialize: HDMI TX Controller Revision, 0x1a
  185. api_Initialize: HDMI TX controller supports HDCP
  186. ==================>enter hdcp_Initialize:25
  187. hdmi phy disable,enable hpd
  188. ====phy conf0=16 reset=1
  189. =====>enable TX_INT in api_Initialize:187
  190. jz-hdmi jz-hdmi: HDMI HPD fail
  191. jz-uart.0: ttyS0 at MMIO 0x10030000 (irq = 59) is a uart0
  192. dwc2 dwc2: ++OTG Interrupt: A-Device Timeout Change++
  193. console [ttyS0] enabled
  194. jz-uart.2: ttyS2 at MMIO 0x10032000 (irq = 57) is a uart2
  195. jz-uart.3: ttyS3 at MMIO 0x10033000 (irq = 56) is a uart3
  196. jz-uart.4: ttyS4 at MMIO 0x10034000 (irq = 42) is a uart4
  197. [drm] Initialized drm 1.1.0 20060810
  198. brd: module loaded
  199. loop: module loaded
  200. pmem_camera: 1 init
  201. jz-dmmu jz-dmmu.0: page_table_pool_init_capacity=4 table_pool_bitmap=0xf
  202. h2clk clk_rate = bebc200
  203. max_program_length = 1f
  204. use_count = 0
  205. is_timer_on = 0
  206. gpio_vddq_en_n = 84
  207. rd_adj = 8
  208. rd_strobe = 7
  209. wr_adj = f
  210. wr_strobe = 140
  211. min_rd_adj = 1
  212. min_rd_adj_strobe = 3
  213. min_wr_adj = 1
  214. min_wr_adj_strobe = 87
  215. max_wr_adj_strobe = 217
  216. dma dma0chan30: Channel 30 have been requested.(phy id 1,type 0x08)
  217. jz4780-nand jz4780-nand.0: enable DMA special channel<0, 1>
  218. ONFI param page 0 valid
  219. ONFI flash detected
  220. NAND device: Manufacturer ID: 0x2c, Chip ID: 0x88 (Micron MT29F64G08CBAAAWP), 8192MiB, page size: 8192, OOB size: 448
  221. Bad block table found at page 1048320, version 0x01
  222. Bad block table found at page 1048064, version 0x01
  223. nand_read_bbt: bad block at 0x00000b400000
  224. nand_read_bbt: bad block at 0x00000b600000
  225. Creating 2 MTD partitions on "jz4780-nand.0":
  226. 0x000000000000-0x000000c00000 : "u-boot"
  227. 0x000000c00000-0x000200000000 : "system"
  228. jz4780-nand jz4780-nand.0: Successfully registered JZ4780 SoC NAND controller driver.
  229. UBI: attaching mtd1 to ubi0
  230. UBI: physical eraseblock size: 2097152 bytes (2048 KiB)
  231. UBI: logical eraseblock size: 2080768 bytes
  232. UBI: smallest flash I/O unit: 8192
  233. UBI: VID header offset: 8192 (aligned 8192)
  234. UBI: data offset: 16384
  235. UBI: max. sequence number: 403
  236. UBI: attached mtd1 to ubi0
  237. UBI: MTD device name: "system"
  238. UBI: MTD device size: 8180 MiB
  239. UBI: number of good PEBs: 4084
  240. UBI: number of bad PEBs: 6
  241. UBI: number of corrupted PEBs: 0
  242. UBI: max. allowed volumes: 128
  243. UBI: wear-leveling threshold: 4096
  244. UBI: number of internal volumes: 1
  245. UBI: number of user volumes: 2
  246. UBI: available PEBs: 0
  247. UBI: total number of reserved PEBs: 4084
  248. UBI: number of PEBs reserved for bad PEB handling: 40
  249. UBI: max/mean erase counter: 7/1
  250. UBI: image sequence number: 0
  251. UBI: background thread "ubi_bgt0d" started, PID 50
  252. dma dma0chan21: Channel 21 have been requested.(phy id 10,type 0x16)
  253. dma dma0chan22: Channel 22 have been requested.(phy id 9,type 0x16)
  254. JZ47xx SSI Controller for SPI channel 0 driver register
  255. dma dma0chan19: Channel 19 have been requested.(phy id 12,type 0x18)
  256. dma dma0chan20: Channel 20 have been requested.(phy id 11,type 0x18)
  257. JZ47xx SSI Controller for SPI channel 1 driver register
  258. PPP generic driver version 2.4.2
  259. PPP Deflate Compression module registered
  260. PPP BSD Compression module registered
  261. PPP MPPE Compression module registered
  262. NET: Registered protocol family 24
  263. tun: Universal TUN/TAP device driver, 1.6
  264. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  265. dm9000 Ethernet Driver, V1.31
  266. usbcore: registered new interface driver asix
  267. usbcore: registered new interface driver cdc_ether
  268. usbcore: registered new interface driver dm9601
  269. usbcore: registered new interface driver net1080
  270. usbcore: registered new interface driver cdc_subset
  271. usbcore: registered new interface driver zaurus
  272. cdc_ncm: 04-Aug-2011
  273. usbcore: registered new interface driver cdc_ncm
  274. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  275. jz-ehci jz-ehci.0: JZ EHCI
  276. jz-ehci jz-ehci.0: new USB bus registered, assigned bus number 2
  277. jz-ehci jz-ehci.0: irq 28, io mem 0x13490000
  278. jz-ehci jz-ehci.0: USB 0.0 started, EHCI 1.00
  279. usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  280. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  281. usb usb2: Product: JZ EHCI
  282. usb usb2: Manufacturer: Linux 3.0.8-00094-gb4f0297c4d84 ehci_hcd
  283. usb usb2: SerialNumber: jz
  284. hub 2-0:1.0: USB hub found
  285. hub 2-0:1.0: 1 port detected
  286. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  287. jz-ohci jz-ohci.0: JZ OHCI
  288. jz-ohci jz-ohci.0: new USB bus registered, assigned bus number 3
  289. jz-ohci jz-ohci.0: irq 13, io mem 0x134a0000
  290. usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  291. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  292. usb usb3: Product: JZ OHCI
  293. usb usb3: Manufacturer: Linux 3.0.8-00094-gb4f0297c4d84 ohci_hcd
  294. usb usb3: SerialNumber: jz
  295. hub 3-0:1.0: USB hub found
  296. hub 3-0:1.0: 1 port detected
  297. usbcore: registered new interface driver uas
  298. Initializing USB Mass Storage driver...
  299. usbcore: registered new interface driver usb-storage
  300. USB Mass Storage support registered.
  301. usbcore: registered new interface driver usbserial
  302. usbserial: USB Serial Driver core
  303. USB Serial support registered for GSM modem (1-port)
  304. usbcore: registered new interface driver option
  305. option: v0.7.2:USB Driver for GSM modems
  306. dwc2 dwc2: registering gadget driver 'g_cdc'
  307. dwc2 dwc2: bind to driver g_cdc
  308. g_cdc gadget: using random self ethernet address
  309. g_cdc gadget: using random host ethernet address
  310. usb0: MAC d2:0b:e3:9c:4e:50
  311. usb0: HOST MAC f6:de:23:2d:34:30
  312. g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
  313. g_cdc gadget: g_cdc ready
  314. dwc2 dwc2: registered gadget driver 'g_cdc'
  315. mousedev: PS/2 mouse device common for all mice
  316. input: jz-remote as /devices/platform/jz-remote/input/input0
  317. The remote driver registe success
  318. using rtc device, jz-rtc, for alarms
  319. jz-rtc jz-rtc.0: rtc core: registered jz-rtc as rtc0
  320. jz4780-rtc: rtc status reset by power-on
  321. lirc_dev: IR Remote Control driver registered, major 251
  322. IR NEC protocol handler initialized
  323. IR RC5(x) protocol handler initialized
  324. IR RC6 protocol handler initialized
  325. IR JVC protocol handler initialized
  326. IR Sony protocol handler initialized
  327. IR RC5 (streamzap) protocol handler initialized
  328. IR LIRC bridge handler initialized
  329. Linux video capture interface: v2.00
  330. soc-camera-pdrv soc-camera-pdrv: register ok!
  331. device-mapper: uevent: version 1.0.3
  332. device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  333. Bluetooth: HCI UART driver ver 2.2
  334. Bluetooth: HCI H4 protocol initialized
  335. Bluetooth: HCILL protocol initialized
  336. Bluetooth: Generic Bluetooth USB driver ver 0.6
  337. usbcore: registered new interface driver btusb
  338. jzmmc jzmmc.0: vmmc.0 regulator miss
  339. jzmmc jzmmc.1: vmmc.1 regulator miss
  340. usbcore: registered new interface driver usbhid
  341. usbhid: USB HID core driver
  342. jzmmc jzmmc.0: err1 cmd52 iflg00002204 status1F000942
  343. jzmmc jzmmc.0: err1 cmd52 iflg00002204 status1F000942
  344. jzmmc jzmmc.0: err1 cmd8 iflg00002204 status1F000942
  345. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  346. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  347. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  348. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  349. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  350. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  351. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  352. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  353. jzmmc jzmmc.0: err1 cmd1 iflg00002204 status1F000942
  354. jzmmc jzmmc.0: err1 cmd52 iflg00002204 status1F000942
  355. jzmmc jzmmc.0: err1 cmd52 iflg00002204 status1F000942
  356. jzmmc jzmmc.0: err1 cmd8 iflg00002204 status1F000942
  357. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  358. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  359. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  360. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  361. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  362. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  363. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  364. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  365. jzmmc jzmmc.0: err1 cmd1 iflg00002204 status1F000942
  366. jzmmc jzmmc.0: err1 cmd52 iflg00002204 status1F000942
  367. jzmmc jzmmc.0: err1 cmd52 iflg00002204 status1F000942
  368. jzmmc jzmmc.0: err1 cmd8 iflg00002204 status1F000942
  369. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  370. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  371. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  372. jzmmc jzmmc.0: err1 cmd5 iflg00002204 status1F000942
  373. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  374. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  375. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  376. jzmmc jzmmc.0: err1 cmd55 iflg00002204 status1F000942
  377. jzmmc jzmmc.0: err1 cmd1 iflg00002204 status1F000942
  378. asoc: jz4780-hifi <-> jz4780-i2s mapping ok
  379. input: ci20 Headphone Jack as /devices/platform/soc-audio/sound/card0/input1
  380. ALSA device list:
  381. #0: ci20
  382. Netfilter messages via NETLINK v0.30.
  383. NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  384. NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  385. ip_tables: (C) 2000-2006 Netfilter Core Team
  386. TCP cubic registered
  387. NET: Registered protocol family 10
  388. Mobile IPv6
  389. ip6_tables: (C) 2000-2006 Netfilter Core Team
  390. IPv6 over IPv4 tunneling driver
  391. NET: Registered protocol family 17
  392. Bridge firewalling registered
  393. Bluetooth: RFCOMM TTY layer initialized
  394. Bluetooth: RFCOMM socket layer initialized
  395. Bluetooth: RFCOMM ver 1.11
  396. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  397. Bluetooth: BNEP filters: protocol multicast
  398. Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  399. lib80211: common routines for IEEE802.11 drivers
  400. lib80211_crypt: registered algorithm 'NULL'
  401. Registering the dns_resolver key type
  402. dm9000 power on
  403. eth0: dm9000b at b6000000,b6000002 IRQ 220 MAC: d0:31:10:ff:7f:ff (platform data)
  404. x2d x2d: Virtual Driver of JZ X2D registered
  405. Virtual Driver of JZ X2D registered
  406.  
  407. Dongle Host Driver, version 5.90.195.89
  408. Compiled in drivers/net/wireless/bcmdhd on Jun 25 2014 at 12:22:45
  409. jzmmc jzmmc.1: err1 cmd52 iflg00002200 status1F000142
  410. jzmmc jzmmc.1: err1 cmd52 iflg00002204 status1F000942
  411. jzmmc jzmmc.1: err1 cmd8 iflg00002204 status1F000942
  412. mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  413. mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  414. mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  415. mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  416. jzmmc jzmmc.1: clk_want: 24000000, clk_set: 24000000Hz
  417. jzmmc jzmmc.1: clk_want: 24000000, clk_set: 24000000Hz
  418. mmc1: new SDIO card at address 0001
  419. F1 signature read @0x18000000=0x16044330
  420. DHD: dongle ram size is set to 294912(orig 294912)
  421. wl_create_event_handler thr:3f started
  422. dhd_attach thr:40 started
  423. dhd_attach thr:41 started
  424. dhd_attach thr:42 started
  425. Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  426. =========== WLAN placed in RESET ========
  427. jz-rtc jz-rtc.0: setting system clock to 2012-06-01 12:00:02 UTC (1338552002)
  428. RET<0
  429. ov5640 2-003c: i2c write failed!
  430. ov5640: probe of 2-003c failed with error -1
  431. UBIFS: recovery needed
  432. UBIFS: recovery completed
  433. UBIFS: mounted UBI device 0, volume 1, name "root"
  434. UBIFS: file system size: 8316829696 bytes (8121904 KiB, 7931 MiB, 3997 LEBs)
  435. UBIFS: journal size: 18726913 bytes (18288 KiB, 17 MiB, 9 LEBs)
  436. UBIFS: media format: w4/r0 (latest is w4/r0)
  437. UBIFS: default compressor: lzo
  438. UBIFS: reserved for root: 0 bytes (0 KiB)
  439. VFS: Mounted root (ubifs filesystem) on device 0:11.
  440. Freeing unused kernel memory: 232k freed
  441. graphics fb0: open count : 2
  442. [drm] Initialized jz4780-sgx 1.11.2580795 20110701 on minor 0
  443. UBIFS: recovery needed
  444. UBIFS: recovery completed
  445. UBIFS: mounted UBI device 0, volume 0, name "boot"
  446. UBIFS: file system size: 47857664 bytes (46736 KiB, 45 MiB, 23 LEBs)
  447. UBIFS: journal size: 18726913 bytes (18288 KiB, 17 MiB, 9 LEBs)
  448. UBIFS: media format: w4/r0 (latest is w4/r0)
  449. UBIFS: default compressor: lzo
  450. UBIFS: reserved for root: 0 bytes (0 KiB)
  451. cljiang------bt_power_control,enable = 1
  452. dm9000 dm9000.0: eth0: link down
  453. ADDRCONF(NETDEV_UP): eth0: link is not ready
  454. ADDRCONF(NETDEV_UP): usb0: link is not ready
  455.  
  456. Dongle Host Driver, version 5.90.195.89
  457. Compiled in drivers/net/wireless/bcmdhd on Jun 25 2014 at 12:22:45
  458. wl_android_wifi_on in
  459. =========== WLAN going back to live ========
  460. sdio_reset_comm():
  461. jzmmc jzmmc.1: clk_want: 24000000, clk_set: 24000000Hz
  462. jzmmc jzmmc.1: clk_want: 24000000, clk_set: 24000000Hz
  463. jzmmc jzmmc.1: clk_want: 24000000, clk_set: 24000000Hz
  464. jzmmc jzmmc.1: clk_want: 24000000, clk_set: 24000000Hz
  465. dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  466. Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=98:3b:16:be:49:04
  467. Firmware version = wl0: May 9 2012 23:14:16 version 5.90.195.26.2 FWID 01-1229e594
  468. dhd_rx_frame: net device is NOT registered yet. drop packet
  469. dhd_rx_frame: net device is NOT registered yet. drop packet
  470. wl_android_wifi_off in
  471. =========== WLAN placed in RESET ========
  472. dhd_prot_ioctl : bus is down. we have nothing to do
  473. wlan0: set cur_etheraddr failed
  474.  
  475. Dongle Host Driver, version 5.90.195.89
  476. Compiled in drivers/net/wireless/bcmdhd on Jun 25 2014 at 12:22:45
  477. wl_android_wifi_on in
  478. =========== WLAN going back to live ========
  479. sdio_reset_comm():
  480. jzmmc jzmmc.1: clk_want: 24000000, clk_set: 24000000Hz
  481. jzmmc jzmmc.1: clk_want: 24000000, clk_set: 24000000Hz
  482. jzmmc jzmmc.1: clk_want: 24000000, clk_set: 24000000Hz
  483. jzmmc jzmmc.1: clk_want: 24000000, clk_set: 24000000Hz
  484. F1 signature read @0x18000000=0x16044330
  485. wlan0: no IPv6 routers present
  486.  
  487. root@ci20:~# cat /proc/cpuinfo
  488. system type : CI20
  489. processor : 0
  490. cpu model : Ingenic Xburst V4.15 FPU V0.0
  491. BogoMIPS : 1196.85
  492. wait instruction : yes
  493. microsecond timers : no
  494. tlb_entries : 32
  495. extra interrupt vector : yes
  496. hardware watchpoint : yes, count: 1, address/irw mask: [0x0fff]
  497. microMIPS : no
  498. ASEs implemented : mxu
  499. shadow register sets : 1
  500. kscratch registers : 0
  501. core : 0
  502. VCED exceptions : not available
  503. VCEI exceptions : not available
  504. Hardware : ci20
  505. Serial : bcbb2134 1481c003 fb0f0000 8a61aa4f
  506.  
  507. processor : 1
  508. cpu model : Ingenic Xburst V4.15 FPU V0.0
  509. BogoMIPS : 1196.85
  510. wait instruction : yes
  511. microsecond timers : no
  512. tlb_entries : 32
  513. extra interrupt vector : yes
  514. hardware watchpoint : yes, count: 1, address/irw mask: [0x0fff]
  515. microMIPS : no
  516. ASEs implemented : mxu
  517. shadow register sets : 1
  518. kscratch registers : 0
  519. core : 0
  520. VCED exceptions : not available
  521. VCEI exceptions : not available
  522. Hardware : ci20
  523. Serial : bcbb2134 1481c003 fb0f0000 8a61aa4f
  524.  
  525. root@ci20:~# free -m
  526. total used free shared buffers cached
  527. Mem: 997 187 810 0 0 34
  528. -/+ buffers/cache: 153 844
  529. Swap: 0 0 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement