API tools faq
paste
Advertisement
KirboWnz

gcode_macro.cfg

KirboWnz
Sep 7th, 2023
1,958
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
YAML 14.57 KB | None | 0 0
raw download clone embed print report
  1. root@creality /usr/share [#] cat klipper/config/K1_MAX_CR4CU220812S11/gcode_macro.cfg
  2. # K1-MAX
  3. # CreateDate: 2023/03/15
  4. # history: 1. date: 2023.03.17
  5. #             modify: [gcode_macro END_PRINT]
  6. #          2. date: 2023.03.20
  7. #             delete: [gcode_macro Qmode].printer_state
  8. #          3. date: 2023.03.23
  9. #             modify: [gcode_macro LOAD_MATERIAL]
  10. #                     [gcode_macro QUIT_MATERIAL]
  11.  
  12. [gcode_macro PRINTER_PARAM]
  13. variable_z_safe_pause: 0.0
  14. variable_z_safe_g28: 3.0
  15. variable_max_x_position: 300.0
  16. variable_max_y_position: 300.0
  17. variable_max_z_position: 300.0
  18. variable_fans: 3
  19. variable_auto_g29: 0
  20. variable_fan0_min: 50
  21. variable_fan1_min: 50
  22. variable_fan2_min: 180
  23. variable_fan2_speed: 0
  24. gcode:
  26. [gcode_macro AUTOTUNE_SHAPERS]
  27. variable_autotune_shapers: 'ei'
  28. gcode:
  30. [gcode_macro LOAD_MATERIAL_CLOSE_FAN2]
  31. variable_fan2_value: 0
  32. gcode:
  33.  SAVE_GCODE_STATE NAME=myMoveState
  34.   {% if printer['output_pin fan2'].value > 0.0 %}
  35.     SET_GCODE_VARIABLE MACRO=LOAD_MATERIAL_CLOSE_FAN2 VARIABLE=fan2_value VALUE={printer['output_pin fan2'].value}
  36.     M107 P2
  37.   {% endif %}
  38.  
  39. [gcode_macro LOAD_MATERIAL_RESTORE_FAN2]
  40. gcode:
  41.  {% set fan2_value = printer['gcode_macro LOAD_MATERIAL_CLOSE_FAN2'].fan2_value|float %}
  42.   RESTORE_GCODE_STATE NAME=myMoveState
  43.   {% if fan2_value > 0.0 %}
  44.     {% set s_value = (fan2_value * 255 - printer["gcode_macro PRINTER_PARAM"].fan2_min) * 255 / (255 - printer["gcode_macro PRINTER_PARAM"].fan2_min) %}
  45.     M106 P2 S{s_value}
  46.     SET_GCODE_VARIABLE MACRO=LOAD_MATERIAL_CLOSE_FAN2 VARIABLE=fan2_value VALUE=0
  47.   {% endif %}
  48.  
  49. [gcode_macro LOAD_MATERIAL]
  50. gcode:
  51.  LOAD_MATERIAL_CLOSE_FAN2
  52.   M109 S{printer.custom_macro.default_extruder_temp}
  53.   G91
  54.   G1 E150 F180
  55.   LOAD_MATERIAL_RESTORE_FAN2
  56.  
  57. [gcode_macro QUIT_MATERIAL]
  58. gcode:
  59.  SAVE_GCODE_STATE NAME=myMoveState
  60.   M109 S{printer.custom_macro.default_extruder_temp}
  61.   G91
  62.   G1 E20 F180
  63.   G1 E-30 F180
  64.   G1 E-50 F2000
  65.   RESTORE_GCODE_STATE NAME=myMoveState
  66.  
  67. [gcode_macro Qmode]
  68. variable_flag: 0
  69. variable_accel: 0
  70. variable_accel_to_decel: 0
  71. variable_velocity: 0
  72. variable_square_corner_velocity: 0
  73. variable_pressure_advance:0.0
  74. variable_fan0_value: 0.00
  75. variable_fan1_value: 0.00
  76. variable_fan2_value: 0.00
  77. variable_speed_factor: 0
  78. gcode:
  79.  {% set printer_state = printer.print_stats.state %}
  80.   {% if printer['gcode_macro Qmode'].flag|int == 0 %}
  81.     {% if printer_state == "printing" or printer_state == "paused" %}
  82.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=accel VALUE={printer.toolhead.max_accel}
  83.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=accel_to_decel VALUE={printer.toolhead.max_accel_to_decel}
  84.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=velocity VALUE={printer.toolhead.max_velocity}
  85.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=square_corner_velocity VALUE={printer.toolhead.square_corner_velocity}
  86.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=pressure_advance VALUE={printer.extruder.pressure_advance}
  87.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=speed_factor VALUE={printer.gcode_move.speed_factor}
  88.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=fan0_value VALUE={printer['output_pin fan0'].value}
  89.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=fan1_value VALUE={printer['output_pin fan1'].value}
  90.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=fan2_value VALUE={printer['output_pin fan2'].value}
  91.       SET_TMC_FIELD STEPPER=stepper_x FIELD=en_spreadcycle VALUE=0
  92.       SET_TMC_FIELD STEPPER=stepper_y FIELD=en_spreadcycle VALUE=0
  93.  
  94.       # Set Motion Parameters
  95.       SET_VELOCITY_LIMIT ACCEL=5000
  96.       SET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500
  97.       SET_VELOCITY_LIMIT VELOCITY=200
  98.       SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5
  99.       SET_PRESSURE_ADVANCE ADVANCE=0.05
  100.       M220 S50
  101.       M106 P0 S80
  102.       M106 P1 S0
  103.       M106 P2 S0
  104.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=flag VALUE=1
  105.     {% endif %}
  106.   {% endif %}
  107.  
  108. [gcode_macro Qmode_exit]
  109. gcode:
  110.  {% set printer_state = printer.print_stats.state %}
  111.   {% if printer['gcode_macro Qmode'].flag|int == 1 %}
  112.     {% if printer_state == "printing" or printer_state == "paused" %}
  113.       SET_VELOCITY_LIMIT ACCEL={printer['gcode_macro Qmode'].accel}
  114.       SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer['gcode_macro Qmode'].accel_to_decel}
  115.       SET_VELOCITY_LIMIT VELOCITY={printer['gcode_macro Qmode'].velocity}
  116.       SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={printer['gcode_macro Qmode'].square_corner_velocity}
  117.       SET_PRESSURE_ADVANCE ADVANCE={printer['gcode_macro Qmode'].pressure_advance}
  118.       M220 S{printer['gcode_macro Qmode'].speed_factor * 100}
  119.       M106 P0 S{(printer['gcode_macro Qmode'].fan0_value * 255 + 0.5)|int}
  120.       M106 P1 S{(printer['gcode_macro Qmode'].fan1_value * 255 + 0.5)|int}
  121.       M106 P2 S{(printer['gcode_macro Qmode'].fan2_value * 255 + 0.5)|int}
  122.       SET_TMC_FIELD STEPPER=stepper_x FIELD=en_spreadcycle VALUE=1
  123.       SET_TMC_FIELD STEPPER=stepper_y FIELD=en_spreadcycle VALUE=1
  124.       SET_GCODE_VARIABLE MACRO=Qmode VARIABLE=flag VALUE=0
  125.     {% endif %}
  126.   {% endif %}
  127.  
  128. [gcode_macro M204]
  129. rename_existing: M204.1
  130. gcode:
  131.  {% if printer['gcode_macro Qmode'].flag|int == 0 %}
  132.     {% set get_params = "" %}
  133.     {% if 'S' in params|upper %}
  134.       {% set get_params = (get_params + ' ' + 'S' + params.S) %}
  135.     {% endif %}
  136.     {% if 'P' in params|upper %}
  137.       {% set get_params = (get_params + ' ' + 'P' + params.P) %}
  138.     {% endif %}
  139.     {% if 'T' in params|upper %}
  140.       {% set get_params = (get_params + ' ' + 'T' + params.T) %}
  141.     {% endif %}
  142.     M204.1 {get_params}
  143.   {% endif %}
  144.  
  145. [gcode_macro M205]
  146. gcode:
  147.  {% if 'X' in params %}
  148.     SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={params.X}
  149.   {% elif 'Y' in params %}
  150.     SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={params.Y}
  151.   {% endif %}
  152.  
  153. [gcode_macro M106]
  154. gcode:
  155.  {% set fans = printer["gcode_macro PRINTER_PARAM"].fans|int %}
  156.   {% set fan = 0 %}
  157.   {% set value = 0 %}
  158.   {% if params.P is defined %}
  159.     {% set tmp = params.P|int %}
  160.     {% if tmp < fans %}
  161.       {% set fan = tmp %}
  162.     {% endif %}
  163.   {% endif %}
  164.   {% if params.S is defined %}
  165.     {% set tmp = params.S|float %}
  166.   {% else %}
  167.     {% set tmp = 255 %}
  168.   {% endif %}
  169.   {% if tmp > 0 %}
  170.     {% if fan == 0 %}
  171.       {% set value = printer["gcode_macro PRINTER_PARAM"].fan0_min + (255 - printer["gcode_macro PRINTER_PARAM"].fan0_min) / 255 * tmp %}
  172.     {% endif %}
  173.     {% if fan == 1 %}
  174.       {% set value = printer["gcode_macro PRINTER_PARAM"].fan1_min + (255 - printer["gcode_macro PRINTER_PARAM"].fan1_min) / 255 * tmp %}
  175.     {% endif %}
  176.     {% if fan == 2 %}
  177.       {% set value = printer["gcode_macro PRINTER_PARAM"].fan2_min + (255 - printer["gcode_macro PRINTER_PARAM"].fan2_min) / 255 * tmp %}
  178.     {% endif %}
  179.   {% endif %}
  180.   {% if value >= 255 %}
  181.     {% set value = 255 %}
  182.   {% endif %}
  183.   SET_PIN PIN=fan{fan} VALUE={value}
  184.  
  185. [gcode_macro M107]
  186. gcode:
  187.  {% if params.P is defined %}
  188.     SET_PIN PIN=fan{params.P|int} VALUE=0
  189.   {% else %}
  190.     SET_PIN PIN=fan0 VALUE=0
  191.     SET_PIN PIN=fan2 VALUE=0
  192.   {% endif %}
  193.  
  194. [gcode_macro M900]
  195. gcode:
  196.  {% if 'K' in params %}
  197.     {% if 'E' in params %}
  198.       SET_PRESSURE_ADVANCE EXTRUDER={params.E} ADVANCE={params.K}
  199.     {% else %}
  200.       SET_PRESSURE_ADVANCE ADVANCE={params.K}
  201.     {% endif %}
  202.   {% endif %}
  203.  
  204. [delayed_gcode wait_temp]
  205. # initial_duration: 2.
  206. gcode:
  207.  {% set cur_temp = printer.extruder.temperature %}
  208.   {% if cur_temp|int < 40 %}
  209.     {action_respond_info("end_temp!\n")}
  210.     WAIT_TEMP_END
  211.   {% else %}
  212.     {action_respond_info("cur_temp = %s \n" % (cur_temp))}
  213.     UPDATE_DELAYED_GCODE ID=wait_temp DURATION=5
  214.   {% endif %}
  215.  
  216. [gcode_macro WAIT_TEMP_START]
  217. gcode:
  218.  UPDATE_DELAYED_GCODE ID=wait_temp DURATION=1
  219.   M106 P0 S255
  220.   M106 P2 S255
  221.  
  222. [gcode_macro WAIT_TEMP_END]
  223. gcode:
  224.  UPDATE_DELAYED_GCODE ID=wait_temp DURATION=0
  225.   M106 P0 S0
  226.   M106 P2 S0
  227.  
  228. [gcode_macro PRINT_CALIBRATION]
  229. # This part of the command is replaced by the application side without passing parameters
  230. # The macro of LASER_CALIBRATION is for application use and has not been implemented
  231. # The macro of FLOW_DETECTION is for application use and has not been implemented
  232. gcode:
  233.  CX_PRINT_LEVELING_CALIBRATION
  234.   LASER_CALIBRATION
  235.   FLOW_DETECTION
  236.  
  237. [gcode_macro FIRST_FLOOR_PAUSE_POSITION]
  238. gcode:
  239.  {% set extruder_temp = printer.custom_macro.g28_ext_temp %}
  240.   M104 S{extruder_temp}
  241.   {% set y_park = printer.toolhead.axis_maximum.y/2 %}
  242.   {% set x_park = printer['gcode_macro PRINTER_PARAM'].max_x_position|float + 1 %}
  243.   G90
  244.   G1 X{x_park} Y{y_park} Z2.0 F6000
  245.   G1 Z0.2 F600
  246.  
  247. [gcode_macro ACCURATE_G28]
  248. gcode:
  249.  G28 Z
  250.  
  251. [gcode_macro START_PRINT]
  252. gcode:
  253.  WAIT_TEMP_END
  254.   CLEAR_PAUSE
  255.   {% set g28_extruder_temp = printer.custom_macro.g28_ext_temp %}
  256.   {% set bed_temp = printer.custom_macro.default_bed_temp %}
  257.   {% set extruder_temp = printer.custom_macro.default_extruder_temp %}
  258.  
  259.   {% if 'BED_TEMP' in params|upper and (params.BED_TEMP|float) %}
  260.     {% set bed_temp = params.BED_TEMP %}
  261.   {% endif %}
  262.  
  263.   {% if 'EXTRUDER_TEMP' in params|upper and (params.EXTRUDER_TEMP|float) %}
  264.     {% set extruder_temp = params.EXTRUDER_TEMP %}
  265.   {% endif %}
  266.  
  267.   CX_PRINT_DRAW_ONE_LINE
  268.  
  269. [gcode_macro END_PRINT_POINT]
  270. gcode:
  271.  {% if "xyz" in printer.toolhead.homed_axes %}
  272.     {% set max_z = printer["gcode_macro PRINTER_PARAM"].max_z_position|float %}
  273.     {% set act_z = printer.toolhead.position.z|float %}
  274.     {% set z_safe = 0.0 %}
  275.     {% if act_z < (max_z / 2) %}
  276.       {% set z_safe = (max_z / 2) - act_z %}
  277.     {% elif act_z < max_z %}
  278.       {% set z_safe = 2.0 %}
  279.     {% endif %}
  280.     G91
  281.     G1 Z{z_safe} F600
  282.     G90
  283.     {% set y_park = printer.toolhead.axis_maximum.y/2 %}
  284.     {% set x_park = printer.toolhead.axis_maximum.x|float - 10.0 %}
  285.     G1 X{x_park} Y{y_park} F6000
  286.   {% else %}
  287.     {action_respond_info("end print xyz_axes is NULL\n")}
  288.   {% endif %}
  289.  
  290. [gcode_macro END_PRINT]
  291. gcode:
  292.  # Qmode_exit
  293.   M220 S100
  294.   M204 S500
  295.   TURN_OFF_HEATERS
  296.   M107 P1
  297.   END_PRINT_POINT
  298.   WAIT_TEMP_START
  299.   M84
  300.  
  301. [gcode_macro PAUSE]
  302. description: Pause the actual running print
  303. rename_existing: PAUSE_BASE
  304. # change this if you need more or less extrusion
  305. variable_extrude: 1.0
  306. gcode:
  307.  ##### read E from pause macro #####
  308.   {% set E = printer["gcode_macro PAUSE"].extrude|float %}
  309.   ##### set park positon for x and y #####
  310.   # default is your max posion from your printer.cfg
  311.   {% set y_park = printer.toolhead.axis_maximum.y/2 %}
  312.   {% set x_park = printer.toolhead.axis_maximum.x|float - 10.0 %}
  313.   # save fan2 value and turn off fan2
  314.   SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan2_speed VALUE={printer['output_pin fan2'].value}
  315.   # {% set fspeed = printer['gcode_macro PRINTER_PARAM'].fan2_speed %}
  316.   # {action_respond_info("fan2_value1 = %s \n" % (fspeed))}
  317.   # SET_PIN PIN=fan2 VALUE=0
  318.   M106 P2 S0
  319.   ##### calculate save lift position #####
  320.   {% set max_z = printer["gcode_macro PRINTER_PARAM"].max_z_position|float %}
  321.   {% set act_z = printer.toolhead.position.z|float %}
  322.   {% set z_safe = 0.0 %}
  323.   {% if act_z < (max_z - 2.0) %}
  324.     {% set z_safe = 2.0 %}
  325.   {% elif act_z < max_z %}
  326.     {% set z_safe = max_z - act_z %}
  327.   {% endif %}
  328.   ##### end of definitions #####
  329.   SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=z_safe_pause VALUE={z_safe|float}
  330.   PAUSE_BASE
  331.   G91
  332.   {% if printer.extruder.can_extrude|lower == 'true' %}
  333.     G1 E-{E} F2100
  334.   {% else %}
  335.     {action_respond_info("Extruder not hot enough")}
  336.   {% endif %}
  337.   {% if "xyz" in printer.toolhead.homed_axes %}
  338.     G1 Z{z_safe} F600
  339.     G90
  340.     G1 X{x_park} Y{y_park} F6000
  341.   {% else %}
  342.     {action_respond_info("Printer not homed")}
  343.   {% endif %}
  344.  
  345. [gcode_macro INPUTSHAPER]
  346. gcode:
  347.  SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
  348.   G90
  349.   G28
  350.   {% set POSITION_X = printer.configfile.settings['stepper_x'].position_max/2 %}
  351.   {% set POSITION_Y = printer.configfile.settings['stepper_y'].position_max/2 %}
  352.   G1 X{POSITION_X} Y{POSITION_Y} Z5 F6000
  353.   SHAPER_CALIBRATE
  354.   CXSAVE_CONFIG
  355.   SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1
  356.  
  357. [gcode_macro BEDPID]
  358. gcode:
  359.  PID_CALIBRATE HEATER=heater_bed TARGET=100
  360.   SAVE_CONFIG
  361.  
  362. [gcode_macro TUNOFFINPUTSHAPER]
  363. gcode:
  364.  SET_INPUT_SHAPER SHAPER_FREQ_X=0 SHAPER_FREQ_Y=0
  365.  
  366. [gcode_macro RESUME]
  367. description: Resume the actual running print
  368. rename_existing: RESUME_BASE
  369. gcode:
  370.  {% if printer['gcode_macro PRINTER_PARAM'].fan2_speed > 0 %}
  371.     # {% set fspeed = printer['gcode_macro PRINTER_PARAM'].fan2_speed %}
  372.     # {action_respond_info("fan2_value2 = %s \n" % (fspeed))}
  373.     # SET_PIN PIN=fan2 VALUE={(printer['gcode_macro PRINTER_PARAM'].fan2_speed * 255 + 0.5)|int}
  374.     {% set s_value = (printer['gcode_macro PRINTER_PARAM'].fan2_speed * 255 - printer['gcode_macro PRINTER_PARAM'].fan2_min) * 255 / (255 - printer['gcode_macro PRINTER_PARAM'].fan2_min)|float %}
  375.     M106 P2 S{s_value}
  376.   {% endif %}
  377.   ##### read E from pause macro #####
  378.   {% set E = printer["gcode_macro PAUSE"].extrude|float %}
  379.   #### get VELOCITY parameter if specified ####
  380.   {% if 'VELOCITY' in params|upper %}
  381.     {% set get_params = ('VELOCITY=' + params.VELOCITY) %}
  382.   {%else %}
  383.     {% set get_params = "" %}
  384.   {% endif %}
  385.   ##### end of definitions #####
  386.   {% if printer.extruder.can_extrude|lower == 'true' %}
  387.     G91
  388.     G1 E{E} F2100
  389.   {% else %}
  390.     {action_respond_info("Extruder not hot enough")}
  391.   {% endif %}
  392.   RESUME_BASE {get_params}
  393.  
  394. [gcode_macro CANCEL_PRINT]
  395. description: Cancel the actual running print
  396. rename_existing: CANCEL_PRINT_BASE
  397. gcode:
  398.  END_PRINT
  399.   CANCEL_PRINT_BASE
  400.  
  401. [gcode_macro G29]
  402. gcode:
  403.  {% if 'PROBE_COUNT' in params|upper %}
  404.     {% set get_count = ('PROBE_COUNT' + params.PROBE_COUNT) %}
  405.   {%else %}
  406.     {% set get_count = "" %}
  407.   {% endif %}
  408.  
  409.   {% set bed_temp = printer.custom_macro.default_bed_temp %}
  410.   {% set extruder_temp = printer.custom_macro.g28_ext_temp %}
  411.   {% set nozzle_clear_temp = printer.custom_macro.default_extruder_temp %}
  412.  
  413.   {% if 'BED_TEMP' in params|upper %}
  414.     {% set bed_temp = params.BED_TEMP %}
  415.   {% endif %}
  416.  
  417.   {% if 'EXTRUDER_TEMP' in params|upper %}
  418.     {% set nozzle_clear_temp = params.EXTRUDER_TEMP %}
  419.   {% endif %}
  420.  
  421.   G28
  422.   BED_MESH_CLEAR
  423.   NOZZLE_CLEAR HOT_MIN_TEMP={extruder_temp} HOT_MAX_TEMP={nozzle_clear_temp} BED_MAX_TEMP={bed_temp}
  424.   ACCURATE_G28
  425.   M204 S5000
  426.   SET_VELOCITY_LIMIT ACCEL_TO_DECEL=5000
  427.   BED_MESH_CALIBRATE {get_count}
  428.   BED_MESH_OUTPUT
  429.   {% set y_park = printer.toolhead.axis_maximum.y/2 %}
  430.   {% set x_park = printer.toolhead.axis_maximum.x|float - 10.0 %}
  431.   G1 X{x_park} Y{y_park} F2000
  432.   CXSAVE_CONFIG
  433.   TURN_OFF_HEATERS
  434.  
  435. # [gcode_macro G299]
  436. # gcode:
  437. #     BED_MESH_CLEAR
  438. #     G28
  439. #     PRTOUCH_READY
  440. #     BED_MESH_CALIBRATE
  441. #     BED_MESH_OUTPUT
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!