IPV6, VLAN, TELNET, SSH

--------------------- IPv6 ---------------------
•	Router: ipv6 unicast-routing
•	Interface: 	- ipv6 enable; ipv6 address <IPv6 address>/<mask> or
            	- ipv6 address <IPv6 network>/<mask> eui-64
•	Static routing: ipv6 route <remote network>/<mask> <next hop>
•	Rip routing: ipv6 rip <name> enable (for every interface, same name for same network)
•	Rip routing: ipv6 router rip <name> (for the entire router)

--------------------- VLAN ---------------------
•	Defining VLANs (on all switches that will operate with them): vlan <vlan id>; optional: name <name>
•	Interfaces: switchport mode <acceess/trunk>
•	If the int is in access mode (endpoints): switchport access vlan <vlan id>
•	Multiple interfaces: interface range fastEthernet 0/<range: eg. 1-4>
•	Show current vlans: show vlan

--------------------- ROUTER (SSH/TELNET) ---------------------
SSH:
•	enable secret <secret password> (global password)
•	hostname <hostname>
•	ip domain-name <domain>
•	crypto key generate rsa modulus 1024
	(Key name is: <hostname>.<domain>)
•	username <username> secret <secret>
•	line vty 0 4
•	transport input ssh
•	login local
TELNET:
•	enable secret <secret password>
•	hostname <hostname>
•	username <username> secret <secret>
•	line vty 0 4
•	transport input telnet
•	login local

--------------------- SWITCH ---------------------
SSH:
•	enable secret <secret password>
•	username <username> secret <secret>
•	interface vlan <vlan-id>
•	no shutdown
•	ip domain-name <domain>
•	crypto key generate rsa 1024
•	ip ssh version 2
•	line vty 0 4
•	transport input ssh
•	login local
--------------------------------------------------
USMERJANJE MED VLAN-I Z USMERJEVALNIKOM
Za vsak VLAN nastavimo:
•	Router (config)#interface fastEthernet 0/1. <št.Vlan>
•	Router (config-subif)#encapsulation dot1q <št.Vlan>
•	Router (config-subif)#ip address <ip številka> <maska omrežja>
Na vmesniku stikala, ki je povezan z usmerjevalnikom, nastavimo vlan trunk.
USMERJANJE MED VLAN-I Z L3 STIKALOM
Vključimo usmerjanje: ip routing
Vmesniki za usmerjanje na usmerjevalniku
•	no switchport
•	no shutdown
•	ip address ip maska
Dodelitev IP naslovov za posamezen vLAN:
•	interface vlan<št. vlan>
•	ip address ip maska
•	no shutdown
Na L3 stikalu lahko kreiramo VLAN-e na enak način kot na L2 stikalu.
Na vmesniku stikala, ki so povezani z L3 stikalom, nastavimo vlan trunk.