"Button Detection" rev_02

/********* Pleasedontcode.com **********

    Pleasedontcode thanks you for automatic code generation! Enjoy your code!

    - Terms and Conditions:
    You have a non-exclusive, revocable, worldwide, royalty-free license
    for personal and commercial use. Attribution is optional; modifications
    are allowed, but you're responsible for code maintenance. We're not
    liable for any loss or damage. For full terms,
    please visit pleasedontcode.com/termsandconditions.

    - Project: "Button Detection"
    - Source Code NOT compiled for: ESP32 DevKit V1
    - Source Code created on: 2024-05-27 13:32:22

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
    /* Develop a Ben10 Omnitrix project using an Arduino */
    /* with a TFT round display and a push button */
    /* connected to pin D4. Utilize the EasyButton */
    /* library for button handling. Ensure the setup */
    /* initializes the button with INPUT_PULLUP mode. */
/****** SYSTEM REQUIREMENT 2 *****/
    /* Develop a Ben10 Omnitrix project using an Arduino */
    /* with a TFT round display and a push button */
    /* connected to pin D4. Utilize the EasyButton */
    /* library for button handling and ensure the setup */
    /* initializes the button with INPUT_PULLUP mode.with */
    /* images of ali */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <EasyButton.h>  // https://github.com/evert-arias/EasyButton

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void onPressed(void);  // Prototype for the button press callback function

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t TFTrounddisplay_PushButton_PIN_D4 = 4;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton button(TFTrounddisplay_PushButton_PIN_D4);  // Initialize EasyButton with the pin

void onPressed()
{
  Serial.println("Button pressed");  // Callback function for button press
}

void setup(void)
{
  // Initialize serial communication
  Serial.begin(115200);
  Serial.println();
  Serial.println(">>> EasyButton pressed example <<<");

  // Set pin mode with INPUT_PULLUP
  pinMode(TFTrounddisplay_PushButton_PIN_D4, INPUT_PULLUP);

  // Initialize the button
  button.begin();

  // Set the callback function for button press
  button.onPressed(onPressed);
}

void loop(void)
{
  // Read the button state
  button.read();
}

/* END CODE */