API tools faq
paste
Advertisement
ALTracer

boot3 last_kmsg2.log

ALTracer
May 7th, 2016
385
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.46 KB | None | 0 0
raw download clone embed print report
  1. show last_kmsg2 sig 1128743492, size 6464, hw_status 2, reboot_mode 0!
  2. esp(0xc0ff8080), i=460
  3. [ 300.943847]-(0)[1:init]resp: 0x90014a48 0x38473165 0x507a159 0x1b3249
  4. [ 300.971948]-(0)[1:init]emmc offset (0x4000)
  5. [ 300.973983]-(0)[1:init]init eMMC success
  6. [ 300.973996]- 298.314081] (0)[94:recovery][wwy]lcm_parms->physical_width = 0
  7. [ 298.315710] (0)[94:recovery][DISP/MTKFB] [WaitQ] wait_event_interruptible() ret = 10, 762
  8. [ 298.455154] (0)[0:swapper/0]kpd: register = ffff ffff ffff ffff ff
  9. [ 298.455182] (0)[0:swapper/0]kpd: (released) HW keycode = 9
  10. [ 298.455238] (0)[0:swapper/0]kpd: report Linux keycode = 114
  11. [ 298.455257] (0)[0:swapper/0]kpd: save new keymap state
  12. [ 298.612186] (0)[0:swapper/0]kpd: register = fdff ffff ffff ffff ff
  13. [ 298.612211] (0)[0:swapper/0]kpd: (pressed) HW keycode = 9
  14. [ 298.612257] (0)[0:swapper/0]kpd: report Linux keycode = 114
  15. [ 298.612275] (0)[0:swapper/0]kpd: save new keymap state
  16. [ 298.661238] (0)[94:recovery][wwy]lcm_parms->physical_height = 0
  17. [ 298.661244] (0)[94:recovery][wwy]lcm_parms->physical_width = 0
  18. [ 298.662840] (0)[94:recovery][DISP/MTKFB] [WaitQ] wait_event_interruptible() ret = 10, 762
  19. [ 298.805550] (0)[0:swapper/0]kpd: register = ffff ffff ffff ffff ff
  20. [ 298.805577] (0)[0:swapper/0]kpd: (released) HW keycode = 9
  21. [ 298.805635] (0)[0:swapper/0]kpd: report Linux keycode = 114
  22. [ 298.805655] (0)[0:swapper/0]kpd: save new keymap state
  23. [ 299.341584] (0)[36:kworker/0:1]<<-GTP-DEBUG->> [2214][Esd]0x8040 = 0xFF, 0x8041 = 0x00
  24. [ 300.001148]-(0)[0:swapper/0][Power/PMIC] [mt6323_pmic_eint_irq] receive interrupt
  25. [ 300.001176]-(0)[0:swapper/0][Power/PMIC] [wake_up_pmic]
  26. [ 300.001240] (0)[33:pmic_thread_kth][Power/PMIC] [pmic_thread_kthread] running
  27. [ 300.001271] (0)[33:pmic_thread_kth][Power/PMIC] [INT] int_status_val_0=0x20
  28. [ 300.001294] (0)[33:pmic_thread_kth][Power/PMIC] [pwrkey_int_handler]....
  29. [ 300.001323] (0)[33:pmic_thread_kth][Power/PMIC] [pwrkey_int_handler] Press pwrkey
  30. [ 300.001343] (0)[33:pmic_thread_kth]kpd: Power Key generate, pressed=1
  31. [ 300.001396] (0)[33:pmic_thread_kth]kpd: (pressed) HW keycode =116 using PMIC
  32. [ 300.001443] (0)[33:pmic_thread_kth][Power/PMIC] [INT] int_status_val_1=0x0
  33. [ 300.002618] (0)[33:pmic_thread_kth][Power/PMIC] [INT] after ,int_status_val_0=0x0
  34. [ 300.002650] (0)[33:pmic_thread_kth][Power/PMIC] [INT] after ,int_status_val_1=0x0
  35. [ 300.041949] (0)[94:recovery][wwy]lcm_parms->physical_height = 0
  36. [ 300.041957] (0)[94:recovery][wwy]lcm_parms->physical_width = 0
  37. [ 300.043577] (0)[94:recovery][DISP/MTKFB] [WaitQ] wait_event_interruptible() ret = 10, 762
  38. [ 300.069804] (0)[94:recovery][wwy]lcm_parms->physical_height = 0
  39. [ 300.069812] (0)[94:recovery][wwy]lcm_parms->physical_width = 0
  40. [ 300.071424] (0)[94:recovery][DISP/MTKFB] [WaitQ] wait_event_interruptible() ret = 9, 762
  41. [ 300.131163]-(0)[94:recovery][Power/PMIC] [mt6323_pmic_eint_irq] receive interrupt
  42. [ 300.131181]-(0)[94:recovery][Power/PMIC] [wake_up_pmic]
  43. [ 300.131648] (0)[33:pmic_thread_kth][Power/PMIC] [pmic_thread_kthread] running
  44. [ 300.131670] (0)[33:pmic_thread_kth][Power/PMIC] [INT] int_status_val_0=0x20
  45. [ 300.131683] (0)[33:pmic_thread_kth][Power/PMIC] [pwrkey_int_handler]....
  46. [ 300.131699] (0)[33:pmic_thread_kth][Power/PMIC] [pwrkey_int_handler] Release pwrkey
  47. [ 300.131709] (0)[33:pmic_thread_kth]kpd: Power Key generate, pressed=0
  48. [ 300.131748] (0)[33:pmic_thread_kth]kpd: (released) HW keycode =116 using PMIC
  49. [ 300.131778] (0)[33:pmic_thread_kth][Power/PMIC] [INT] int_status_val_1=0x0
  50. [ 300.132911] (0)[33:pmic_thread_kth][Power/PMIC] [INT] after ,int_status_val_0=0x0
  51. [ 300.132927] (0)[33:pmic_thread_kth][Power/PMIC] [INT] after ,int_status_val_1=0x0
  52. [ 300.152018]SysRq : Emergency Remount R/O
  53. [ 300.152334] (0)[1:init][gps]null pointer!!
  54. [ 300.152382] (0)[1:init]******** battery driver shutdown!! ********
  55. [ 300.152763]-(0)[1:init]mt_usb_disable, 0, 0
  56. [ 300.152875] (0)[1:init]******** MT auxadc driver shutdown!! ********
  57. [ 300.152887] (0)[1:init][LED]mt65xx_leds_shutdown
  58. [ 300.152895] (0)[1:init][LED]mt65xx_leds_shutdown: turn off backlight
  59. [ 300.152904] (0)[1:init][LED]backlight control through BLS!!1
  60. [ 300.152914] (0)[1:init][BLS]disp_bls_set_backlight: 0, gBLSPowerOn = 0
  61. [ 300.152948] (0)[1:init][BLS]after mapping, mapped_level: 0
  62. [ 300.152958] (0)[1:init][BLS]after SET, PWM_DUTY: 0
  63. [ 300.152997] (0)[1:init][DISP/MTKFB] [FB Driver] mtkfb_shutdown()
  64. [ 300.156835] (0)[36:kworker/0:1]Emergency Remount complete
  65. [ 300.201172] (0)[1:init][DDP] MT_CG_DISP0_SMI_LARB0 is forced on
  66. [ 300.202285] (0)[1:init][DISP/DSI] DSI_set_cmdq_V3[0]. DSI_CMDQ+0000 : 0x00280500
  67. [ 300.212329] (0)[1:init][DISP/DSI] DSI_set_cmdq_V3[1]. Delay 10 (ms)
  68. [ 300.212346] (0)[1:init][DISP/DSI] DSI_set_cmdq_V3[2]. DSI_CMDQ+0000 : 0x00100500
  69. [ 300.252390] (0)[1:init][DISP/DSI] DSI_set_cmdq_V3[3]. Delay 120 (ms)
  70. (0)[1:init][DDP]disp_path_power_off, caller:mtkfb
  71. [ 300.438303] (0)[1:init][DDP]disp_reg_backup() start, *pRegBackup=0xdeadbeef, reg_offset=0
  72. [ 300.438373] (0)[1:init][DDP]disp_reg_backup() end, *pRegBackup=0x2, reg_offset=213
  73. [ 300.438402] (0)[1:init][DDP] OVLReset called 0
  74. [ 300.438649] (0)[1:init][DISP/MTKFB] [FB Driver] leave mtkfb_shutdown
  75. [ 300.438683] (0)[1:init]+AudDrv_shutdown
  76. [ 300.438700] (0)[1:init]-AudDrv_shutdown
  77. [ 300.438824] (0)[1:init][battery_meter_shutdown]
  78. [ 300.438854] (0)[1:init]mtkfb_vsync device shutdown
  79. [ 300.438874] (0)[1:init]******** MTK WDT driver shutdown!! ********
  80. [ 300.438895] (0)[1:init]*******
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!