API tools faq
paste
Advertisement
tahc81

Untitled

tahc81
Jan 24th, 2024 (edited)
75
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
YAML 7.23 KB | None | 0 0
raw download clone embed print report
  1. [17:17:26][I][logger:351]: Log initialized
  2. [17:17:26][C][ota:473]: There have been 0 suspected unsuccessful boot attempts.
  3. [17:17:26][D][esp32.preferences:114]: Saving 1 preferences to flash...
  4. [17:17:26][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
  5. [17:17:26][I][app:029]: Running through setup()...
  6. [17:17:26][I][i2c.arduino:183]: Performing I2C bus recovery
  7. [17:17:26][C][ina2xx:016]: Setting up INA2xx...
  8. [17:17:26][D][ina2xx:197]: Reset
  9. [17:17:26][D][ina2xx:494]: read_unsigned_16_ 0x3E, ret= OK, val=0x5449
  10. [17:17:26][D][ina2xx:494]: read_unsigned_16_ 0x3F, ret= OK, val=0x2281
  11. [17:17:26][I][ina2xx:214]: Manufacturer: 0x5449, Device ID: 0x0228, Revision: 1
  12. [17:17:26][I][ina2xx:223]: Supported device found: INA228, 85-V, 20-Bit, Ultra-Precise Power/Energy/Charge Monitor
  13. [17:17:26][D][ina2xx:260]: Setting ADCRANGE = 1
  14. [17:17:26][D][ina2xx:494]: read_unsigned_16_ 0x00, ret= OK, val=0x0000
  15. [17:17:26][D][ina2xx:292]: Given Rshunt=0.001110 Ohm and Max_current=40.000
  16. [17:17:26][D][ina2xx:293]: New CURRENT_LSB=0.000076, SHUNT_CAL=4440
  17. [17:17:26][D][sensor:094]: 'Uptime Sensor': Sending state 0.26000 s with 0 decimals of accuracy
  18. [17:17:26][D][ina2xx:050]: Updating
  19. [17:17:26][D][ina2xx:052]: Initiating new data collection
  20. [17:17:26][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=3, val=0x0
  21. [17:17:26][D][ina2xx:325]: read_shunt_voltage_mv_ ret=OK, reading_lsb=0.000000
  22. [17:17:26][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 mV with 5 decimals of accuracy
  23. [17:17:26][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=3, val=0x0
  24. [17:17:26][D][ina2xx:346]: read_bus_voltage_ ret=OK, reading_lsb=0.000000
  25. [17:17:26][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 5 decimals of accuracy
  26. [17:17:26][D][ina2xx:494]: read_unsigned_16_ 0x0A, ret= OK, val=0x0000
  27. [17:17:26][D][ina2xx:366]: read_die_temp_c_ ret=OK, reading_lsb=0.000000
  28. [17:17:26][D][sensor:094]: 'INA228 DIE Temperature': Sending state 0.00000 °C with 5 decimals of accuracy
  29. [17:17:26][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=3, val=0x0
  30. [17:17:26][D][ina2xx:382]: read_current_a_ ret=OK. current_lsb=0.000076. reading_lsb=0.000000
  31. [17:17:26][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 8 decimals of accuracy
  32. [17:17:26][D][ina2xx:485]: read_unsigned_ reg=0x08, ret=OK, len=3, val=0x101C
  33. [17:17:26][D][ina2xx:396]: read_power_w_ ret=OK, reading_lsb=4124
  34. [17:17:26][D][sensor:094]: 'INA228 Power': Sending state 1.00684 W with 6 decimals of accuracy
  35. [17:17:26][D][ina2xx:494]: read_unsigned_16_ 0x0B, ret= OK, val=0x0003
  36. [17:17:26][D][ina2xx:452]: read_diagnostics_and_act_ ret=OK, 0x0003
  37. [17:17:26][D][ina2xx:485]: read_unsigned_ reg=0x09, ret=OK, len=5, val=0x4A
  38. [17:17:26][D][ina2xx:416]: read_energy_j_ ret=OK, reading_lsb=0x4A, current_lsb=0.000076, overflow_cnt=0
  39. [17:17:26][D][sensor:094]: 'INA228 Energy': Sending state 0.28906 J with 8 decimals of accuracy
  40. [17:17:26][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=5, val=0x1B0
  41. [17:17:26][D][ina2xx:438]: read_charge_c_ ret=1, curr_charge=432.000000 + 39-bit overflow_cnt=0
  42. [17:17:26][D][sensor:094]: 'INA228 Charge': Sending state 0.03296 C with 8 decimals of accuracy
  43. [17:17:28][D][ina2xx:050]: Updating
  44. [17:17:28][D][ina2xx:052]: Initiating new data collection
  45. [17:17:28][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=3, val=0x0
  46. [17:17:28][D][ina2xx:325]: read_shunt_voltage_mv_ ret=OK, reading_lsb=0.000000
  47. [17:17:28][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 mV with 5 decimals of accuracy
  48. [17:17:28][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=3, val=0x0
  49. [17:17:28][D][ina2xx:346]: read_bus_voltage_ ret=OK, reading_lsb=0.000000
  50. [17:17:28][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 5 decimals of accuracy
  51. [17:17:28][D][ina2xx:494]: read_unsigned_16_ 0x0A, ret= OK, val=0x0000
  52. [17:17:28][D][ina2xx:366]: read_die_temp_c_ ret=OK, reading_lsb=0.000000
  53. [17:17:28][D][sensor:094]: 'INA228 DIE Temperature': Sending state 0.00000 °C with 5 decimals of accuracy
  54. [17:17:28][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=3, val=0x0
  55. [17:17:28][D][ina2xx:382]: read_current_a_ ret=OK. current_lsb=0.000076. reading_lsb=0.000000
  56. [17:17:28][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 8 decimals of accuracy
  57. [17:17:28][D][ina2xx:485]: read_unsigned_ reg=0x08, ret=OK, len=3, val=0xFAA
  58. [17:17:28][D][ina2xx:396]: read_power_w_ ret=OK, reading_lsb=4010
  59. [17:17:28][D][sensor:094]: 'INA228 Power': Sending state 0.97900 W with 6 decimals of accuracy
  60. [17:17:28][D][ina2xx:494]: read_unsigned_16_ 0x0B, ret= OK, val=0x0003
  61. [17:17:28][D][ina2xx:452]: read_diagnostics_and_act_ ret=OK, 0x0003
  62. [17:17:28][D][ina2xx:485]: read_unsigned_ reg=0x09, ret=OK, len=5, val=0x1D0
  63. [17:17:28][D][ina2xx:416]: read_energy_j_ ret=OK, reading_lsb=0x1D0, current_lsb=0.000076, overflow_cnt=0
  64. [17:17:28][D][sensor:094]: 'INA228 Energy': Sending state 1.81250 J with 8 decimals of accuracy
  65. [17:17:28][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=5, val=0x986
  66. [17:17:28][D][ina2xx:438]: read_charge_c_ ret=1, curr_charge=2438.000000 + 39-bit overflow_cnt=0
  67. [17:17:28][D][sensor:094]: 'INA228 Charge': Sending state 0.18600 C with 8 decimals of accuracy
  68. [17:17:30][D][ina2xx:050]: Updating
  69. [17:17:30][D][ina2xx:052]: Initiating new data collection
  70. [17:17:30][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=3, val=0x0
  71. [17:17:30][D][ina2xx:325]: read_shunt_voltage_mv_ ret=OK, reading_lsb=0.000000
  72. [17:17:30][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 mV with 5 decimals of accuracy
  73. [17:17:30][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=3, val=0x0
  74. [17:17:30][D][ina2xx:346]: read_bus_voltage_ ret=OK, reading_lsb=0.000000
  75. [17:17:30][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 5 decimals of accuracy
  76. [17:17:30][D][ina2xx:494]: read_unsigned_16_ 0x0A, ret= OK, val=0x0000
  77. [17:17:30][D][ina2xx:366]: read_die_temp_c_ ret=OK, reading_lsb=0.000000
  78. [17:17:30][D][sensor:094]: 'INA228 DIE Temperature': Sending state 0.00000 °C with 5 decimals of accuracy
  79. [17:17:30][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=3, val=0x0
  80. [17:17:30][D][ina2xx:382]: read_current_a_ ret=OK. current_lsb=0.000076. reading_lsb=0.000000
  81. [17:17:30][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 8 decimals of accuracy
  82. [17:17:30][D][ina2xx:485]: read_unsigned_ reg=0x08, ret=OK, len=3, val=0x1026
  83. [17:17:30][D][ina2xx:396]: read_power_w_ ret=OK, reading_lsb=4134
  84. [17:17:30][D][sensor:094]: 'INA228 Power': Sending state 1.00928 W with 6 decimals of accuracy
  85. [17:17:30][D][ina2xx:494]: read_unsigned_16_ 0x0B, ret= OK, val=0x0003
  86. [17:17:30][D][ina2xx:452]: read_diagnostics_and_act_ ret=OK, 0x0003
  87. [17:17:30][D][ina2xx:485]: read_unsigned_ reg=0x09, ret=OK, len=5, val=0x3C8
  88. [17:17:30][D][ina2xx:416]: read_energy_j_ ret=OK, reading_lsb=0x3C8, current_lsb=0.000076, overflow_cnt=0
  89. [17:17:30][D][sensor:094]: 'INA228 Energy': Sending state 3.78125 J with 8 decimals of accuracy
  90. [17:17:30][D][ina2xx:485]: read_unsigned_ reg=0x0A, ret=OK, len=5, val=0x13C2
  91. [17:17:30][D][ina2xx:438]: read_charge_c_ ret=1, curr_charge=5058.000000 + 39-bit overflow_cnt=0
  92. [17:17:30][D][sensor:094]: 'INA228 Charge': Sending state 0.38589 C with 8 decimals of accuracy
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!