CE6

# nov/19/2017 18:26:03 by RouterOS 6.40.5
# software id =
#
#
#
/interface bridge
add name=bridge-L2VPN_1
add name=bridge-L2VPN_2
add name=bridge1
/mpls traffic-eng tunnel-path
add name=tp1
/interface traffic-eng
add auto-bandwidth-reserve=100% bandwidth=4Mbps bandwidth-limit=100% disabled=no from-address=10.10.0.6 name=traffic-eng1 primary-path=tp1 primary-retry-interval=10s record-route=yes to-address=10.10.0.7
add auto-bandwidth-reserve=100% bandwidth=4Mbps bandwidth-limit=100% disabled=no from-address=10.10.0.6 name=traffic-eng2 primary-path=tp1 primary-retry-interval=10s record-route=yes to-address=10.10.0.7
/routing bgp instance
set default router-id=0.0.0.6
/routing ospf instance
set [ find default=yes ] mpls-te-area=backbone mpls-te-router-id=bridge1
/interface bridge port
add bridge=bridge-L2VPN_1 interface=ether2
add bridge=bridge-L2VPN_2 interface=ether5
/interface vpls bgp-vpls
add bridge=bridge-L2VPN_1 bridge-cost=1 export-route-targets=111:112 import-route-targets=111:111 name=L2VPN_1 pw-type=raw-ethernet route-distinguisher=111:234
add bridge=bridge-L2VPN_2 bridge-cost=12 bridge-horizon=12 export-route-targets=111:222 import-route-targets=111:222 name=L2VPN_2 pw-type=raw-ethernet route-distinguisher=111:222 site-id=3
/ip address
add address=10.0.26.6/26 interface=ether1 network=10.0.26.0
add address=10.10.0.6 interface=bridge1 network=10.10.0.6
/ip dns
set servers=8.8.8.8
/mpls ldp
set lsr-id=10.10.0.6 transport-address=10.10.0.6 use-explicit-null=yes
/mpls ldp interface
add interface=ether1
add interface=bridge1
/mpls traffic-eng interface
add bandwidth=12Mbps interface=ether1
/routing bgp peer
add address-families=ip,l2vpn,l2vpn-cisco,vpnv4 multihop=yes name=peer-P1 remote-address=10.10.0.1 remote-as=65530 ttl=default update-source=bridge1
/routing ospf network
add area=backbone network=10.0.0.0/8
/system identity
set name=CE6
/tool romon
set enabled=yes