U-Boot SPL 2018.07-rc1-g9533bb9 (Oct 12 2018 - 23:39:13 +0200)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE:  BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000)
NOTICE:  Configuring SPC Controller
NOTICE:  BL3-1: v1.0(debug):c9f55c0
NOTICE:  BL3-1: Built : 23:37:29, Oct 12 2018
NOTICE:  DT: sun50i-a64-sopine-baseboard
INFO:    Configuring AXP PMIC
INFO:    PMIC: DRAM voltage: 1.24V
INFO:    PMIC: setup successful
NOTICE:  SCPI: dummy stub handler, implementation level: 000000
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9


U-Boot 2018.07-rc1-g9533bb9 (Oct 12 2018 - 23:39:13 +0200) Allwinner Technology

CPU:   Allwinner A64 (SUN50I)
Model: SoPine with baseboard
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
Loading Environment from FAT... Card did not respond to voltage select!
** Bad device mmc 1 **
Failed (-5)
In:    serial
Out:   serial
Err:   serial
Net:   phy interface7
eth0: ethernet@1c30000
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
** Can't read partition table on 0:0 **
fs_devread read outside partition 103079215104
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Card did not respond to voltage select!

Device 0: device type unknown
... is now current device
** Bad device usb 0 **
** Bad device usb 0 **
ethernet@1c30000 Waiting for PHY auto negotiation to complete.... done
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 10.10.10.150 (258 ms)
*** Warning: no boot file name; using '0A0A0A96.img'
Using ethernet@1c30000 device
TFTP from server 10.10.10.1; our IP address is 10.10.10.150
Filename '0A0A0A96.img'.
Load address: 0x42000000
Loading: T T T T T T T T T T