API tools faq
paste
zmatt

bbai-mcspi2.dts

zmatt
Jul 10th, 2020 (edited)
1,344
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
C++ 8.87 KB | None | 0 0
raw download clone embed print report
  1. // NOTE: this example is not compatible with the new branches that have overlays-support
  2.  
  3. #include "am5729-beagleboneai.dts"
  4. #include "bbai-pins.h"  // https://pastebin.com/vwn4m7Nf
  5.  
  6. &{/chosen} {
  7.     base_dtb = "bbai-mcspi2";   // <-- name of this file goes here
  8. };
  9.  
  10. &{/aliases} {
  11.     // these ought to be in dra7.dtsi but they're missing.
  12.     // they assign spi bus numbers to the spi controller devices.
  13.     // note that dra7.dtsi assigns spi0 to be &qspi.
  14.     spi1 = &mcspi1;
  15.     spi2 = &mcspi2;
  16.     spi3 = &mcspi3;
  17.     spi4 = &mcspi4;
  18. };
  19.  
  20.  
  21. &dra7_pmx_core {
  22.     mcspi2_pins: mcspi2 {
  23.         pinctrl-single,pins = <
  24.             // McSPI clock pin _must_ be configured as PIN_INPUT or the peripheral will not work.
  25.             // ("PIN_INPUT" means input-enabled while "PIN_OUTPUT" means input-disabled.  It has no
  26.             // influence on output-enable, which is controlled by the peripheral it's muxed to.)
  27.             DRA7XX_CORE_IOPAD( P9_22B, PIN_INPUT_PULLUP  | MUX_MODE0  ) // clock
  28.             DRA7XX_CORE_IOPAD( P9_21B, PIN_INPUT_PULLUP  | MUX_MODE0  ) // d1 / data in (miso)
  29.             DRA7XX_CORE_IOPAD( P9_18A, PIN_OUTPUT_PULLUP | MUX_MODE0  ) // d0 / data out (mosi)
  30.             DRA7XX_CORE_IOPAD( P9_17A, PIN_OUTPUT_PULLUP | MUX_MODE0  ) // cs 0
  31.  
  32.             // A/B pairs indicate two processor pins connecting to the same expansion header pin.
  33.             // It's a good idea to always claim both processor pins for any expansion header pin
  34.             // you use.  For the unused processor pin use either PIN_OUTPUT | MUX_MODE15 to
  35.             // disable the pin, or if the pin supports gpio mode you could select that using
  36.             // PIN_INPUT | MUX_MODE14 to be able to monitor the pin.
  37.             DRA7XX_CORE_IOPAD( P9_22A, PIN_OUTPUT        | MUX_MODE15 )
  38.             DRA7XX_CORE_IOPAD( P9_21A, PIN_OUTPUT        | MUX_MODE15 )
  39.             DRA7XX_CORE_IOPAD( P9_18B, PIN_OUTPUT        | MUX_MODE15 )
  40.             DRA7XX_CORE_IOPAD( P9_17B, PIN_OUTPUT        | MUX_MODE15 )
  41.         >;
  42.     };
  43. };
  44.  
  45. &mcspi2 {
  46.     status = "okay";
  47.  
  48.     pinctrl-names = "default";
  49.     pinctrl-0 = <&mcspi2_pins>;
  50.  
  51.     ti,spi-num-cs = <2>;  // number of chip selects used
  52.  
  53.     channel@0 {
  54.         reg = <0>;
  55.         compatible = "spidev";
  56.  
  57.         symlink = "spi/2.0";   // create symlink at /dev/spi/2.0
  58.  
  59.         // FIXME - replace by actual max frequency of device
  60.         spi-max-frequency = <48000000>;
  61.  
  62.         // defaults to SPI mode 0
  63.     };
  64.  
  65.     channel@1 {
  66.         reg = <1>;
  67.         compatible = "spidev";
  68.  
  69.         symlink = "spi/2.1";   // create symlink at /dev/spi/2.1
  70.  
  71.         // FIXME - replace by actual max frequency of device
  72.         spi-max-frequency = <48000000>;
  73.  
  74.         // EXAMPLE - this selects SPI mode 3 (unless overridden by userspace)
  75.         spi-cpol;
  76.         spi-cpha;
  77.     };
  78. };
  79.  
  80.  
  81. // Here's the obnoxious part: since u-boot doesn't have sane pin defaults yet, all pins not  
  82. // explicitly setup above should be overridden here.  This will eventually no longer be needed.  
  83. &cape_pins_default {
  84.     pinctrl-single,pins = <
  85.         DRA7XX_CORE_IOPAD( P9_11A, PIN_INPUT_PULLDOWN | MUX_MODE15 )  // note: has no gpio
  86.         DRA7XX_CORE_IOPAD( P9_11B, PIN_INPUT          | MUX_MODE14 )
  87.         DRA7XX_CORE_IOPAD( P9_12,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  88.         DRA7XX_CORE_IOPAD( P9_13,  PIN_INPUT_PULLDOWN | MUX_MODE15 )  // note: has no gpio
  89.         DRA7XX_CORE_IOPAD( P9_14,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  90.         DRA7XX_CORE_IOPAD( P9_15,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  91.         DRA7XX_CORE_IOPAD( P9_16,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  92.     //  DRA7XX_CORE_IOPAD( P9_17A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  93.     //  DRA7XX_CORE_IOPAD( P9_17B, PIN_INPUT          | MUX_MODE14 )
  94.     //  DRA7XX_CORE_IOPAD( P9_18A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  95.     //  DRA7XX_CORE_IOPAD( P9_18B, PIN_INPUT          | MUX_MODE14 )
  96.         DRA7XX_CORE_IOPAD( P9_19A, PIN_INPUT_PULLUP   | MUX_MODE14 )
  97.         DRA7XX_CORE_IOPAD( P9_19B, PIN_INPUT          | MUX_MODE14 )
  98.         DRA7XX_CORE_IOPAD( P9_20A, PIN_INPUT_PULLUP   | MUX_MODE14 )
  99.         DRA7XX_CORE_IOPAD( P9_20B, PIN_INPUT          | MUX_MODE14 )
  100.     //  DRA7XX_CORE_IOPAD( P9_21A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  101.     //  DRA7XX_CORE_IOPAD( P9_21B, PIN_INPUT          | MUX_MODE14 )
  102.     //  DRA7XX_CORE_IOPAD( P9_22A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  103.     //  DRA7XX_CORE_IOPAD( P9_22B, PIN_INPUT          | MUX_MODE14 )
  104.         DRA7XX_CORE_IOPAD( P9_23,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  105.         DRA7XX_CORE_IOPAD( P9_24,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  106.         DRA7XX_CORE_IOPAD( P9_25,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  107.         DRA7XX_CORE_IOPAD( P9_26A, PIN_INPUT_PULLUP   | MUX_MODE14 )
  108.         DRA7XX_CORE_IOPAD( P9_26B, PIN_INPUT          | MUX_MODE14 )
  109.         DRA7XX_CORE_IOPAD( P9_27A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  110.         DRA7XX_CORE_IOPAD( P9_27B, PIN_INPUT          | MUX_MODE14 )
  111.         DRA7XX_CORE_IOPAD( P9_28,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  112.         DRA7XX_CORE_IOPAD( P9_29A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  113.         DRA7XX_CORE_IOPAD( P9_29B, PIN_INPUT          | MUX_MODE14 )
  114.         DRA7XX_CORE_IOPAD( P9_30,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  115.         DRA7XX_CORE_IOPAD( P9_31A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  116.         DRA7XX_CORE_IOPAD( P9_31B, PIN_INPUT          | MUX_MODE14 )
  117.         DRA7XX_CORE_IOPAD( P9_41A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  118.         DRA7XX_CORE_IOPAD( P9_41B, PIN_INPUT          | MUX_MODE14 )
  119.         DRA7XX_CORE_IOPAD( P9_42A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  120.         DRA7XX_CORE_IOPAD( P9_42B, PIN_INPUT          | MUX_MODE14 )
  121.         DRA7XX_CORE_IOPAD( P8_03,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  122.         DRA7XX_CORE_IOPAD( P8_04,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  123.         DRA7XX_CORE_IOPAD( P8_05,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  124.         DRA7XX_CORE_IOPAD( P8_06,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  125.         DRA7XX_CORE_IOPAD( P8_07,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  126.         DRA7XX_CORE_IOPAD( P8_08,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  127.         DRA7XX_CORE_IOPAD( P8_09,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  128.         DRA7XX_CORE_IOPAD( P8_10,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  129.         DRA7XX_CORE_IOPAD( P8_11,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  130.         DRA7XX_CORE_IOPAD( P8_12,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  131.         DRA7XX_CORE_IOPAD( P8_13,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  132.         DRA7XX_CORE_IOPAD( P8_14,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  133.         DRA7XX_CORE_IOPAD( P8_15A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  134.         DRA7XX_CORE_IOPAD( P8_15B, PIN_INPUT          | MUX_MODE14 )
  135.         DRA7XX_CORE_IOPAD( P8_16,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  136.         DRA7XX_CORE_IOPAD( P8_17,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  137.         DRA7XX_CORE_IOPAD( P8_18,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  138.         DRA7XX_CORE_IOPAD( P8_19,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  139.         DRA7XX_CORE_IOPAD( P8_20,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  140.         DRA7XX_CORE_IOPAD( P8_21,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  141.         DRA7XX_CORE_IOPAD( P8_22,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  142.         DRA7XX_CORE_IOPAD( P8_23,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  143.         DRA7XX_CORE_IOPAD( P8_24,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  144.         DRA7XX_CORE_IOPAD( P8_25,  PIN_INPUT_PULLUP   | MUX_MODE14 )
  145.         DRA7XX_CORE_IOPAD( P8_26,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  146.         DRA7XX_CORE_IOPAD( P8_27A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  147.         DRA7XX_CORE_IOPAD( P8_27B, PIN_INPUT          | MUX_MODE14 )
  148.         DRA7XX_CORE_IOPAD( P8_28A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  149.         DRA7XX_CORE_IOPAD( P8_28B, PIN_INPUT          | MUX_MODE14 )
  150.         DRA7XX_CORE_IOPAD( P8_29A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  151.         DRA7XX_CORE_IOPAD( P8_29B, PIN_INPUT          | MUX_MODE14 )
  152.         DRA7XX_CORE_IOPAD( P8_30A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  153.         DRA7XX_CORE_IOPAD( P8_30B, PIN_INPUT          | MUX_MODE14 )
  154.         DRA7XX_CORE_IOPAD( P8_31A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  155.         DRA7XX_CORE_IOPAD( P8_31B, PIN_INPUT_PULLDOWN | MUX_MODE15 )  // note: has no gpio
  156.         DRA7XX_CORE_IOPAD( P8_32A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  157.         DRA7XX_CORE_IOPAD( P8_32B, PIN_INPUT_PULLDOWN | MUX_MODE15 )  // note: has no gpio
  158.         DRA7XX_CORE_IOPAD( P8_33A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  159.         DRA7XX_CORE_IOPAD( P8_33B, PIN_INPUT          | MUX_MODE14 )
  160.         DRA7XX_CORE_IOPAD( P8_34A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  161.         DRA7XX_CORE_IOPAD( P8_34B, PIN_INPUT          | MUX_MODE14 )
  162.         DRA7XX_CORE_IOPAD( P8_35A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  163.         DRA7XX_CORE_IOPAD( P8_35B, PIN_INPUT          | MUX_MODE14 )
  164.         DRA7XX_CORE_IOPAD( P8_36A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  165.         DRA7XX_CORE_IOPAD( P8_36B, PIN_INPUT          | MUX_MODE14 )
  166.         DRA7XX_CORE_IOPAD( P8_37A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  167.         DRA7XX_CORE_IOPAD( P8_37B, PIN_INPUT_PULLDOWN | MUX_MODE15 )  // note: has no gpio
  168.         DRA7XX_CORE_IOPAD( P8_38A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  169.         DRA7XX_CORE_IOPAD( P8_38B, PIN_INPUT_PULLDOWN | MUX_MODE15 )  // note: has no gpio
  170.         DRA7XX_CORE_IOPAD( P8_39,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  171.         DRA7XX_CORE_IOPAD( P8_40,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  172.         DRA7XX_CORE_IOPAD( P8_41,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  173.         DRA7XX_CORE_IOPAD( P8_42,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  174.         DRA7XX_CORE_IOPAD( P8_43,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  175.         DRA7XX_CORE_IOPAD( P8_44,  PIN_INPUT_PULLDOWN | MUX_MODE14 )
  176.         DRA7XX_CORE_IOPAD( P8_45A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  177.         DRA7XX_CORE_IOPAD( P8_45B, PIN_INPUT          | MUX_MODE14 )
  178.         DRA7XX_CORE_IOPAD( P8_46A, PIN_INPUT_PULLDOWN | MUX_MODE14 )
  179.         DRA7XX_CORE_IOPAD( P8_46B, PIN_INPUT          | MUX_MODE14 )
  180.     >;
  181. };
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!