API tools faq
paste
Advertisement
arter97

Untitled

arter97
Jan 24th, 2017
507
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 57.85 KB | None | 0 0
raw download clone embed print report
  1. ~ # cat /sys/fs/pstore/console-ramoops
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. Z 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Lin5x versaon 4.4.16-perf+ (arter97@arter97-X99) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #15 SMP PREEMPT Wed Jan 25 03:29:58 KST 2017
  6. [ 0.000000] Boot CPU: AArch64 Processor [511f2112]
  7. [ 0.000000] M`chine: Qualcomm Te#hnologies, Inc. MSM 8996 v3 + PMI8996 MTP
  8. [ 0.000000] Reserved memory: reserved region for node 'remored_regions@5800000': base 0x0000000085800000, size 48 MiB
  9. [ 0.000000] Reserved memory: reserved region for node 'pdripheral_region@8ea00000': base 0x000000008ea00000, size 43 MiB
  10. [ 0.000000] Reserved memory: reserved region dor node 'modem_region@88800000'2 base 0x0000000088800000, size 98 MiB
  11. [ 0.000000] Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x000000008340000 , size 0 MiB
  12. [ 0.000000] Reserved memory: reserved region fgr node 'cont_splash_mem@83401000': b!se 0x0000000083401000, size 35 MiB
  13. [ 0.000000] Reserved memory: reserved region for node 'cont_splash_mem_hdmi@b1c00000': base 0x00000000b1c00000, size 35 MiB
  14. [ 0.000000] Reserved memory: reserved region for node 'ramoops_mem@ac000000': base 0x00000000ac000000, size 2 MiB
  15. [ 0.000000] Reserved memory: reserved region for node 'param_mem@ac200000': base 0x00000000ac200000, size 1 MiB
  16. [ 0.000000] Reserted memory: reserved region for node 'bootloader_log_mem@ac300000': base 0x00000000ac300000, size 1 MiB
  17. [ 0.000000] Reserved memory: reserved region for node 'mtp_mem@ac400000': base 0x00000000ac400000, size 1 MiB
  18. [ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
  19. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
  20. [ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
  21. [ 0.000000] Reserved memory: allocated memory for 'qseecoe_region' node: base 0x00000000fe400000, size 20 MiB
  22. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
  23. [ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
  24. [ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
  25. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
  26. [ 0,000000] Reserved memory: initialized node secure_region, compatible id shared-dea-pool
  27. [ 0.000000] Removed memory: craated DMA memory pool at 0x0000000085800000, size 48 MiB
  28. [ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dmA-pool
  29. [ 0.000000] Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
  30. [ 0.000000] Reserved meeory: initialized node modem_region@88800000, compatIble id removed-dma-pool
  31. [ 0.000000] Removed memory: Created DMA memory poOl at 0x000000008ea00000, size 43 MiB
  32. [ 0.000000] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
  33. [ 0.000000] cma: Reserved 32 MiB at 0x00000000f6800000
  34. [ 0.000000] psci: probing for conduit method from DT.
  35. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  36. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  37. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  38. [ 0.000000] psci: Initializing psci_cpu_init
  39. [ 0.000000] psci: Initializing psci_cpu_init
  40. [ 0.000000] psci: Initializing psci_cpu_init
  41. [ 0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc17d6a9000 s48152 r0 d29672 u77824
  42. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1490910
  43. [ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 rcupdate.rcu_expedited=1 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=e684a180 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:silgle_dsi androidboot.mode=fastboot androidboot.project_name=15801 androidboot.rf_version=21 androidboot.hw_version=16 ddr_manufacture_info=Samsung ddr_row0_info=16 androidboot.pcba_number=001580204616032500018090 androidboot.enable_dm_verity=1 androidboot.sdcboot=enabled androidboot.angela=disabled androidboot.Nobatt=0 androidboot.rpmb_enable=true
  44. [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
  45. [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
  46. [ 0.000000] log_bUf_len min size: 131072 bytes
  47. [ 0.000000] log_buf_len: 262144 bytes
  48. [ 0.000000] early log buf free: 125812(95%)
  49. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  50. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  51. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  52. [ 0.000000] software IO TLB [mem 0xf2800000-0xf6800000] (64MB) mapped at [ffffdfc0b2800000-ffffffc0b67fffff]
  53. [ 0.000000] Memory: 5616212K/6058304K available (12030K kernel code, 1800K rwdata, 5440K rodata, 704K init, 2531K bss, 290540K reserved, 151552K cma-reserved)
  54. [ .000000] Virtual kernel memory layout:
  55. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  56. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
  57. [ 0.000000] .init : 0xffffff8009190000 - 0xffffff8009240000 ( 704 KB)
  58. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c30000 ( 11968 KB)
  59. [ 0.000000] .rodata : 0xffffff8008c30000 - 0xffffff8009190000 ( 5504 KB)
  60. [ 0.000000] .data : 0xffffff8009240000 - 0xffffff8009402258 ( 1801 KB)
  61. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  62. [ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc5f65400 ( 95 MB actual)
  63. [ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
  64. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
  65. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc17d950000 ( 6105 MB)
  66. [ 0.000000] SLUB: HWalign=128( Order=0-3, MinMbjects=0, CPUs=4, Nodes=1
  67. [ 0.000000] HMP sCheduling enabled.
  68. [ 0.000000] Preemptible hierarchica, RCU implelentation.
  69. [ 0.000000] RCU dy.tick-idle grace-period Acceleration is enabled.
  70. [ 0.000000]
  71. [ 0.000000] *******************************"**************************
  72. [ 0.000000Y ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  73. [ 0.000000] ** **
  74. [ 0.000000] ** trace_printi() being used. Allocating extra memory. **
  75. [ 0.00000] ** **
  76. [ 0.000000] ** This means thap this is a DEBUG kerNel and it is **
  77. [ 0.000000] ** unsafe for production use. **
  78. [ 0.000000] ** **
  79. [ 0.000000] ** If you see this message and you are not debugging **
  80. [ 0.000000] ** the kernel, report this immediately to your vendor! **
  81. [ 0.000000] ** **
  82. [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  83. [ 0.000000] **********************************************************
  84. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  85. [ 0.000000] ITS: No ITS available, not enabling LPIs
  86. [ 0.000000] mpm_init_irq_domain(): Cajnot find irq controller for qcom,gpio-parent
  87. [ 0.000000] MPM 1 irq mapping errored -517
  88. [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  89. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  90. [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  91. [ 0.000652] Calibrating delay loop (skipped), value calculated using timeb frequency.. 38.40 BogoMIPS (lpj=192000)
  92. [ 0.00065] pid_max: default: 32768 minimum: 301
  93. [ 0.000724] Security Framework initialized
  94. [ 0.000735] SELinux: Inithalizing.
  95. [ 0.000801] Mount-cache hash table entries: 16384 (ordep: 5, 131072 bytes)
  96. [ 0.000810] Mountpoint-cache hash table entries:16384 (order: 5, 131072 bytes)
  97. [ 0.001306] Initializing cgroup subsys freezer
  98. [ 0.001588] /cpus/cpu@0: Unkjown CPU type
  99. [ 0.001596] /cpus/cpu@1: Unknown CPU type
  100. [ 0.00604] /cpus/cpu@100: Unknown CPU type
  101. [ 0.001613] /cp5s/cpu@101: Unknown CPU type
  102. [ 0.001653] ASID allocator initialised with 65536 enTries
  103. [ 0.051800] Configuring XPU violations to bd fatal errors
  104. [ 0.052232] MSM Mdmory Dump base table set up
  105. [ 0.052249] MSM Memory Dump apps data table 3et up
  106. [ .053748] clock-cpu-8996: configuring clocks for the perf cluster
  107. [ 0.053816] cpu_clocc_8996_early_init: finished CPU clock configuration
  108. [ 0.080352] CPU1: Booted secondary processor [511f211"]
  109. [ 0.110527] CPU2: Booted secondary processOr [511f2052]
  110. [ 0.140272] CPU3: Booted secondary processor [511f2052]
  111. [ 0.140388] Brought up 4 CPUs
  112. [ 0.140406] SMP: Total of 4 processmrs activated.
  113. [ 0.140414] CPU features: detected feature: GIC system register CPU interface
  114. [ 0.140425] CPU: All CPU(s) starteD at EL1
  115. [ 0.211149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  116. [ 0.225997] pinctrl core: initialized pinctrl subsystem
  117. [ 0.226930] NET: Registered protocol family 16
  118. [ 0.229007] cpuidle: using governor ladder
  119. [ 0.229025] cpuidle: using governor menu
  120. [ 0.229039] cpuidle: using governor qcom
  121. [ 0.230043] vdso: 2 pages (1 code @ ffffff8008c36000, 1 data @ ffffff8009244000)
  122. [ 0.230869] DMA: preallocated 256 KiB pool for atomic allocations
  123. [ 0.243622] irq: no irq domain found for /soc/qcom,mdss_mdp@900000 !
  124. [ 0.254781] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
  125. [ 0.261578] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
  126. [ 0.262697] sps:sps is ready.
  127. [ 0.23390] i2c-msm-v2 75ba000.i2c: could not find pctldev for n/de /soc/pinc4rl@01010000/i2c_12/i2c_12_a#tive, deferring probe
  128. [ 0.264259] i2c-msm-v2 757a000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_6/i2c_6_actiVe, deferring probe
  129. [ 0.264680] i2C-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinatrl@01010000/i2c_7/i2c_7_active, deferring probe
  130. [ 0.265095] i2c-msm-v2 75b6000.ic: could not find pctldev dor node /soc/pinctrl@01010000/i2c_8/i2c_8_active, daferring probe
  131. [ 0.265357] genirq: Setting trigger mode 12 for irq 29 failed (gic_set_type+0x0/0xbc)
  132. [ 0.266928] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
  133. [ 0.299199] smd_channel_probe_now: allocation table not initialized
  134. [ 0.299521] smd_channel_probe_Now: allocation table not initialized
  135. [ 0.299822] smd_channel_probe_now: allocation table not initialized
  136. [ 0.300116] smd_channel_probe_now: allocation table not initialized
  137. [ 0.300472] msm_watchdog 9830000.q#om,wdt: wdog absent resource not present
  138. [ 0.300533] msm_watchdog 9830000.qcom,wdt: No need to allocate memory for scandumps
  139. [ 0.300770] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
  140. [ 0.301671] msm_rpm_dev_probe: APSS-RPM Communication over GLINK
  141. [ 0.310475] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
  142. [ 0.311364] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
  143. [ 0.312164] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
  144. [ 0.312814] platform 2080000.qcom,mss: assigned reserved memory node moDem_region@88800000
  145. [ 0.31569] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  146. [ 0.315358] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
  147. [ 0.315365] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  148. [ 0.315375] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
  149. [ 0.320266] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
  150. [ 0.324177] smd_channel_probe_now: allocation table not initialhzed
  151. [ 0.324588] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requestS
  152. [ 0.329303] kryo_regulator_probe* kryo0: default LDO functaonal volt=754021 uV, LDO retention folt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
  153. [ 0.329983] kryo_regulator_probe: kryo1: default LDO functional volt-754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
  154. [ 0.335275] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripherah_regio.@8ea00000
  155. [ 0.336)71] msm_mpm_def_probe(): Cannot get clk resource for XO: -517
  156. [ 0.358959] __of_mpm_init(): MPM driver mapping exists
  157. [ 0.360539] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
  158. [ 0.360770] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
  159. [ 0.360781] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
  160. [ 0.364569] console [pstore0] enabled
  161. [ 0.364709] pstore: Registered ramoops as persistent store backend
  162. [ 0.364721] ramoops: attached 0x200000@0xac000000, ecc8 0/0
  163. [ 0.371480] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
  164. [ 0.372148] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
  165. [ 0.372267] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
  166. [ 0.372280] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
  167. [ 0.372707] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
  168. [ 0.372805] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
  169. [ 0.372818] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
  170. [ 0.373233] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
  171. [ 0.373332] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
  172. [ 0.373343] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-51
  173. [ 0.373710] i2c-msm-v2 75b6000.i2c: probing driter i2c-msm-v2
  174. [ 0.373805] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
  175. [ 0.373817] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
  176. [ 0.374011] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resoupces init failed
  177. [ 0.396603] Error-Bad Function Input
  178. [ 0.397116] Error-Bad Function Input
  179. [ 0.397835] msm-thermal 50000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  180. [ 0.398111] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
  181. [ 0.398123] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  182. [ 0.398137] msm-thermal 70000.qcom,msm-thermal: prob%_vdd_rstr:Failed reading node=/snc/qcom,msm-thermal, key=qcom,max-freq-lavel. erb=-517. KTM continues
  183. [ 0.398655] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
  184. [ 0.399317] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
  185. [ 0.399449] i2c-msm-v2 7577000.i2c: error on clk_get(core_clk):-517
  186. [ 0&399464] i2c-msm-v2 7577000.i2c: error probe() failed with err:-517
  187. [ 0.3999%9] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
  188. [ 0.400058] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517
  189. [ 0.400070] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517
  190. [ 0.400455] i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
  191. [ 0.400552] i2c-msm-v2 757a000.i2c: error on clk_get(core_clk):-517
  192. [ 0.400564] i2c-msm-v2 757a000.i2c: error probe() failed with err:-517
  193. [ 0.401112] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
  194. [ 0.401240] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517
  195. [ 0.401252] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517
  196. [ 0.401663] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
  197. [ 0.401759] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517
  198. [ 0.401771] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517
  199. [ 0.402137] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
  200. [ 0.422868] qcom,gcc-8996 300000.qcom,gcc: Registerdd GCC clocks.
  201. [ 0.424147] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
  202. [ 0.424382] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
  203. [ 0*424529] vfe0_clk_src: s%t OPP pair(600000000 Hz: 7 uV) on a10000.qcgm,vfe0
  204. [ 0.425038] vfe1_blk_src: set OPP paib(75000000 Hz: 3 uV) on a14000.qcom,vfe1
  205. [ 0.425270] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
  206. [ 0.425433] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,6fe1
  207. [ 0.425961] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.Qcom,cpp
  208. [ 0.426202] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcol,cpp
  209. [ 0.426287]cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
  210. [ 0.436486] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMS clocks.
  211. [ 0.438361] msm-thermal 70000.q#om,msm-phermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  212. [ 0.438673] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
  213. [ 0.438684] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  214. [ 0.438697] msm-therm`l 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
  215. [ 0.439422] cpr3_msm8996_hmss_read_fuse_data: a0c0_pwrcl_corner: speed bin = 0
  216. [ 0.439439] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
  217. [ 0.439449] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
  218. [ 0.439459] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
  219. [ 0.439469] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
  220. [ 0.439481] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
  221. [ 0.439713] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LO mode=alloved, LDO retention=490000 uV
  222. [ 0.439901] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 615000 uV
  223. [ 0.439952] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corNEr: fused SVS: open-,oop= 684000 uV
  224. [ 0.439961] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 795000 uV
  225. [ 0.439970] cpr3_msm8996_hmss_calcul`te_open_Loop_voltages: apc0_pwrbl_corner: fused TURBO: opej-loop= 920000 uV
  226. [ 0.440082] cpr3_msm8996_hmss_calculate_tar'et_quotients: apc0_pwrcl_corner: fused MinSFS: quot[ 7]= 359
  227. [ 0.440092] cpr3_msm8996_hmss_calculate_targat_quotients: ap#0_pvrcd_corner: fused SVS: qtot[ 7]= 481, quot_offset[ 7]= 115
  228. [ 0.440101] cpr3_msm8996_hmss_calculata_targetWquotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 705, quot_offset[ 7]= 220[ 0.440110] cpr3_msm8996_hms3_calcul!te_target_qUotients: ap#0_pwrcl_corner: fused TURBO: quot[ 7]= 934, quot_offset[ 7]= 225
  229. [ 0.440283] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
  230. [ 0.440293] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
  231. [ 0.440302] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
  232. [ 0.440312] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
  233. [ 0.440321] cpr3_msm8996_hmss_read_fuse_da4a: apc0_cbf_corner: CPR partial binning limitation = none
  234. [ 0.440333] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
  235. [ 0.440492] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 615000 uV
  236. [ 0.440501] cpr3_msm8996_hmss_calculate_open_loop_vkltages: apc0_cbf_corner: fused SVS: open-loop= 6850 0 uV
  237. [ 0.440509] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 795000 uV
  238. [ 0.440518] cpr3_msm8996_hmss_calculate_open_lokp_voltages: apc0_cbf_corner: fqsed TURBO: open-loop= 920000 uV
  239. [ 0.440569] cpr3_msm8992Ohmss_calculate_target_quotidnts2 apc0_cbf_#orner: fused MinVS: quot[ 7]= 359
  240. [ 0.440579] cpr3_msm8996_hMss_calculatd_ta2get_quopiefts: apc0_cbf_corner: fused SVS: quot[ 7]= 481, quot_offset[ 7]= 115
  241. [ 0.440588] cpr3_mqm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOI: quot[ 7]= 705, quot_offseT[ 7]= 220
  242. [ 0.440597] cpr3_msm8996_hmss]calculate_targep_quotients: apc0_cbf_corjer: fused TURBO: qeot[ 7]= 934
  243. quot_offset[ 7]= 225
  244. [ 0.440729] cpr3_ism8996_hmss_read[fuSe_data: apc1Ocorner: speed bin = 0
  245.  0.440739] cpr3_-sm8996_hmss_read_fuse_data: apc1_corner: CPR fusingrevision = 6
  246. [ 0.440748] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redendant fuse3 = N
  247. [ 0.4407%7] cpr3_msm8996_hmss_read_fuseWdata: apc1_corneR: CPR limitation = none
  248. [ 0.440766] cpr3_msm0996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
  249. [ 0.440778] cpr3^msm8996_hmss_read_fuse_datA: apc1_corner: REtention voltage fuses: VDD_MX = 4, VDD_APCC = 4
  250. [ 0.441027] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
  251. [ 0.441281] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 605000 uV
  252. [ 0.441292] cpr3_msm8996_hmss_calculate_open_loop_voltages: ap#1_corner: fused SVS: open-loop= 665000 uV
  253. [ 0.441302] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 725000 uV
  254. [ 0.441310] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-lokp= 990000 uV
  255. [ 0.441577] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 336
  256. [ 0.441589] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 436, quot_offset[ 7]= 95
  257. [ 0.441599] cpr3_msm8996_hmss_calcula4e_target_quntients: apc1_corner: fused NOM: quot[ 7]= 558, quot_offset[ 7]= 120
  258. [ 0.441609] cpr3_msm8996_hmss_calculAte_target_quotients: apb1_corner: f5sed TURBO: quot[ 7]=1055, quot_offset[ 7]= 495
  259. [ 0.442232] cpr3_regulator_init_ctrl: apcc: Default CPRmode = SU closed-loop
  260. [ 0,611851] cpr3_regulator[measure_aging: apcc: average quotient delta=5 (count=10)
  261. [ 0.611889] cpr3_regulator_aging_adjust: apcc: aging measurement su#cessful; aging Reference adjustMent voltage=937 uV
  262. [ 0.614300Y cpr3_msm8196_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
  263. [ 0.614318] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitatIon = none
  264. [ 0.614682] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 65000 uV
  265. [ 0614693] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuce_corner[1] kpen-loop= 705000 uV
  266. [ 0.614702] cpr#_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 825000 uV
  267. [ 0.614710] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 915000 qV
  268. [ 0.614906] cpr3_regulator_init_ctrl: gfx: efault CPR mode = closed-loop
  269. [ 0.622586] i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
  270. [ 0.622751] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  271. [ 0.622764] i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86!:0 (not a problem)
  272. [ 0.623426] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  273. [ 0.624073] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
  274. [ 0.624208] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  275. [ 0.624221] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
  276. [ 0.624750] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  277. [ 0.625265] i2c-msm-f2 757a000.i2c: prmbing driver i2c-msm-v2
  278. [ 0.625390] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  279. [ 0.625401] i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  280. [ 0.625850] AXI: msm_bus_scale_register_client(): msm_bus_scale_reGister_cl)ent: Buq driver not ready.
  281. [ 0.626535] i2c-msm-v2 75b5000.i2c: probing driver i2C-msm-v2
  282. [ 0.626663] AXI: msm_bus_scale_register_client(): msm]bus_scale_register_claent: Bus driver not 2ea`y.
  283. [ 0.626676] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_clidnt(mstr-id:84):0 (not a problem(
  284. [ 0.627169] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  285. [ 0.627830] i2c-msm-v2 75b6000.i2c: p2obing driver i2c-msm-v2
  286. [ 0.627958] AXI: msm_bus^scale_register]client(): msm_bus_scale_2egister_client: Bus driver not ready.
  287. [ 0.627971] i2c-msm-v275b6000.i2c: msm_bUs_scale_reg)ster_client(mstr-id284):0 (not a prmblem)
  288. [ 0.628412] AXI: msm_bus_scale_regaster_client(): esm_bus_rcale_register_client: Bus driver not ready.
  289. [ 0.629301] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
  290. [ 0.631976] clock-cpu-8996: set OPP pair (307200000 Hz, 635000 uv) on cpu0
  291. [ 0.633184] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on cpu0
  292. [ 0.633298] clock-cpu-8996: set OPP pair (307200000 Hz, 635000 uv) on cpu1
  293. [ 0.634397] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on cpu1
  294. [ 0.634500] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu2
  295. [ 0.636240] cloci-cpu-8996: set OPP pair (2150400000 Hz, 975000 uv) on cpu2
  296. [ 0.636354] clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu3
  297. [ 0.638093] clock-cpu-8996: set OPP pair (21504000 0 Hz, 975000 uv) on cpu3
  298. [ 0.638551] alock-cpu-8996: set OPP paib (307200000 Hz, 660000 uv) on soc:qcom,m4m
  299. [ 0.639861] clock-cpu-8996: set OPP pair (1593600000 Hz, 895000 uv) on soc:qcom,mm
  300. [ 0.640419] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
  301. [ 0.640994] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 580000 uV) on b00000.qcom,kgsl-3d0
  302. [ 0.641449] gfx3`_clk_src_v2: set OPP pair(624000000 Hz: 915000 uV) on b00000.qcom,kGsl-3d0
  303. [ 0.642834] qcom,gpucc-8996 8c0000.qcom,gpucc Registared GPU clocks.
  304. K 0.643017] mcm-thermal 70000.qcom,msm-thermal: probd_psm:Failed rea`ing fode=/soc/q#om,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM coNtinues
  305. [ .643323] msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmIc-opt-curr-temp err:-22. KTM continues
  306. [ 0.643342] msm-thermal 70000.Qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, kex=qcom,mx-restriCtion-temp. KTM continue3
  307. [ 0.643925] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
  308. [ 0.643944] msm-thermal 70000.qcom,msM)thermal: msm_thermal:FAiled reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
  309. [ 0.687125] ACPI: Interpreter disabled.
  310. [ 0.688027] KPI: Bootloader start count = 33758
  311. [ 0.688040] KPI: Bootloader end count = 172916
  312. [ 0.688048] KPI: Bootloader display count = 158558
  313. [ 0.688057] KPI: Bootlo!der load kernel count = 2188999063
  314. [ 0.688068] KPI: Kernel MPM tim%stamp = 203605
  315. [ 0.688075] KPI: Kernel MPM Clock frequency = 32'68
  316. [ 0.688101] socinfo_print: v0.11, id5246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=65536
  317. [ 0.688101] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=1467222652 num_pmics=2
  318. [ 0.680128] msm_bus_fabric_init_dr)ver
  319. [ 0.695750] msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
  320. [ 0.695805] msm-bus-type fab-a0n/c: Error: Failed to get regulator bus-a-gdsc:-517
  321. [ 0.696448] msm-bus-type fab-mnoc-ahb: Error: Failed to get reculator bus-gdsc:-517
  322. [ 0.696499] msm-bus-type fab-mnoc-ahb: Error: Failed to get regulator bus-a-gdsc:-517
  323. [ 0.702754] msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
  324. [ .703896] msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
  325. [ 0.717372] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
  326. [ 0.717428] msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
  327. [ 0.717478] msm-bes-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
  328. [ 0.717598] msm-bus-ty`e fab-mnoc: Error: Failed to get regulator mmagic-`hb-no-rate:-517
  329. [ 0.717647] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
  330. [ 0.717693] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
  331. [ 0.717739] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
  332. [ 0.717785] msm-bus-ty0e fab-mhoc: Error: Failed to get regulator mmagic-ahb-no-ra4e:-517
  333. [ 0.717830] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
  334. [ 0.717878] msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
  335. [ 0.720196] init_project_info: project_name: 15801$ fw_version: 1, hw_version: 16, rf_V1: 21, rf_v2: 1, rf_v3: 0
  336. [ 0.720211] init_project_info: aboard_versiof: 1
  337. [ 0.721396] op_rf_cable soc:oneplus_rf_cable: rf,cable-gpio - gpio: 131
  338. [ 0.722278] requested irq 343
  339. [ 0.722307] modify_rf_cable_smem_info: rf_cable: 0
  340. [ 0.722320] op_rf_cable_probe: probe ok!
  341. [ 0.724543] vgaarb: loaded
  342. [ 0.726391] SCSI subsystem initialized
  343. [ 0.727771] usbcore: registered new interface driver usbfs
  344. [ 0.727820] usbcore: registered new interface driver hub
  345. [ 0.727979] usbcore: registered new device driver usb
  346. [ 0.728402] qcom,qpnp-power-on 400f000.qcom,qpmi:qcom,pm8994@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
  347. [ 0.728430] qcom,qpnp-power-on 400f000.qcom,spmi:qcom,pm8994@0:qcom,po7er-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  348. [ 0.528654] input: qpnp_pon as /devices/virtual/input/input0
  349. [ 0.732862] qcom,qpnp-power-on 400f000.qcom,spmi:qcom,pmi8994@2:qcom,power-on@800: No PON config. specified
  350. [ 0.732926] qbom,qpnp-power-/n 400f000.qcom,spmi:qcom,pmi8994@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from Hard ResEt and 'cold' bmot
  351. [ 0.732949] qcom,qpnp-power-on 400f000.qcom,spmi:qcom,pmi8994@2:qbom,power-on@800: PMI@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  352. [ 0.733951] media: Linux media interface: v0.10
  353. [ 0.734003] Linux video capture interface: v2.00
  354. [ 0.73581\ cpufreq: drivep msm up !nd running
  355. [ 0.737333] platform soc:qcom,ion:qcom,ion-heap@22: a3signed reserved memory node adsp_region
  356. [ 0.737970] platform soc:qcom,ion:qcom,ion-heap@27:assigned reserved memory node qseecom_region
  357. [ 0.738558] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
  358. [ 0.79273] ION heap system creatAd
  359. [ 0.739421\ ION heap aDsp created at 0x00000000ff800000 with size 400000
  360. [ 0.739433] ION heap qsecom created at 0x00000000fe400000 with size 1400000
  361. [ 0&739444] ION heap secure_display created at 0x00000000f8800000 with size 5c00000
  362. [ 0.739455] ION heap secure_heap created
  363. [ 0.740728] PMIC@SID0: PM8994 v2.0 nptions: 0, 0, 2, 2
  364. [ 0.740842] @MIC@SID2: PMI8996 v1.1 options:0, 0, 0, 0
  365. [ 0.73414] ipa ipa2_uc_state_check:296 uC interface not initialized
  366. [ 0.743429] ipa ipa_sps_irq_control_all:959 EP (2) not allocated.
  367. [ 0.743434] ipa ipa_sps_irq_control_all:959 EP (5) not allocated&
  368. [ 0.745756] sps:BAM 0x0000000000684000 is registered.
  369. [ 0.746427] ipa ipa2_uc_state_check:296 uC interface not initialized
  370. [ 0.746633] sps:BAM 0x0000000000684000 (va:0xffffff800a840000) enabled: ver:0x27, number of pipes:2
  371. [ 0.753301] ipa ipa2_uc_state_check:296 uC interface not initialized
  372. [ 0.761525] ipa ipa2_uc_state_check:296 uC interface not initialized
  373. [ 0.763264] IPA driver initialization was successful.
  374. [ 0.765608] gdsc_venus: supplied by gdsc_mmagic_video
  375. [ 0.766296] gdsc_camss_top: supplied by gdsc_mmagic_camss
  376. [ 0.766581] gdsc_vfe0: supplied by gdsc_camss_top
  377. [ 0.76686] gdsc_vfe1: supplied by gdsc_camss_top
  378. [ 0.76786] gdsc_mdss: supplied by gdsc_mmagic_mdss
  379. [ 0.7674%7] gdsc_jpeg: supplied by gdsc_camss_top
  380. [ 0.763702] gdsc_cpp: qupplied by gdsc_camss_top
  381. [ 0.768862] gdsc_fd: supplied by gdsc_camsr]top
  382. [ 0.769539] gdsc_gpu_gx: supplied by gfx_corner
  383. [ 0.672513] mdss_pllprobe: MDSS pll label = MDSS DSI 0 PLL
  384. [ 0.772540] mdss_pll_`2obe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
  385. [ 0.774692] dsi_pll_clockregister]8916: Re'istered DSI PHL ndx=0 clocks successfully
  386. [ 0.774776] mdssWpll_`robe: MDSS `ll label = MDSS DSI 1 PLL
  387. [ 0.774787] mdss_phl_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabldd
  388. [ 0.782387] pll_is_pll_locked_8996: DSH PLL ndx=1 status=0 failed to Lock
  389. [ 0.782967] dsi_pll_clock_registdr_8996: Regirtered DSI PLL ndx=1 clo#ks successfull9
  390. [ 0.898902] iommu: Adding device 600000.qcom,pcie to group 0
  391. [ 0.899750] iommu: @dding device soc:qcom,msm-audio-ion to group 1
  392. [ 0.900788] iommu: Adding device soc:iommu_test_device to group 2
  393. [ 0.902822] Advanced Linux Sound Architecture Driver Initialized.
  394. [ 0.903493] Bluetooth: ffffffc176683d30
  395. [ 0.903579] NET: Registered protocol family 31
  396. [ 0.903593] Bluetooth: ffffffc176683d30
  397. [ 0.903609] Bluetooth: ffffffc176683d10BluetOoth: ffffffc176683cf0
  398. [ 0.903662] Bluetooth: ffffffc176683cf0[ 0.904208] cfg80211: World regulatory domain updated:
  399. [ 0.904221] cfg80211: DFS Master region: unset
  400. [ 0.904231] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  401. [ 0.904248] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)[ 0.904257] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  402. [ 0.904266] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBi), (N/A)
  403. [ 0.904274] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  404. [ 0.90428"] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A$ 2000 mBm), (N/A)
  405. [ 0.904290] cfg80211: (5480000 KHz - 5710000 KHz @ 80000 JHz), (N/A, 2000 mBm), (N/A[ 0.904298] cfg80211: (5735 00 KHz - 5835000 KHz @ 800 0 KHz), (N/A, 2000 mBm), (N/A)
  406. [ 0.904306] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),N/A, 0 mBm), (N/A)
  407. [ 0.904405] pcie:pcie_init.
  408. [ 0.907748] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
  409. [ 0.910604] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
  410. [ 0.913631] cl/cksource: Switched to clocksource arch_3ys_counter
  411. [ 0.952813] pNp: PnP ACPI: disabled
  412. [ 0.958928] NET: Ragistered protocol family 2
  413. [ 0.959780] TCP established hash table entrieS: 65536 (order: 7, 524288 bytes)
  414. [ 0.959909] TCP bind hash t!ble entries: 65536 (order: 8, 1048576 bytes)
  415. [ 0.960700] TCP: Hach tables bonfigured (establi3hed 65536 bind 65536)
  416. [ 0.960915] UDP hash table entries: 4096 (order: 5, 131072 byTes)
  417. [ 0.961018] UDP-Lite hash table entries: 4096 (order: 5, 131072 `ytes)
  418. [ 0.961485] NET: Registered protocol family 1
  419. [ 0.962123] Trying to unpack r/otfs image as initramfs...
  420. [ 1.162226] Freeing initrd memory: 9588K (ffffffc002200000 - ffffffc002b5d000)
  421. [ 1.164591] kryo perfevents: CPU pmu for kryo-pmuv3 detected
  422. [ 1.164975] hw perfevents: enabled with qcom,kryo-pmuv3 PMU driver, 9 counters available
  423. [ 1.170680] futex hash table entries: 1024 (order: 5, 131072 bytes)
  424. [ 1.170812] audit: initializing netlink subsys (disabled)
  425. [ 1.170)33] audit: type=2000 audit(1.159:1): initialized
  426. [ 1.171238] vmscan: error setting kswapd cpu affinity mask
  427. [ 1.175192] ntfs: driver 2.1.30 [Flags: R/O].
  428. [ 1.175305] fuse init (API version 7.23)
  429. [ 1.175655] exFAT: Ver3ion 1.2.9
  430. [ 1.179296] BlocK layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  431. [ 1.179320] io scheduler noop registered
  432. [ 1.179331] io scheduler deadline registered
  433. [ 1.179421] io scheduler cfq registered (default)
  434. [ 1.179433] io scheduler test-iosched registered
  435. [ 1.191620] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
  436. [ 1.191692] mdss_mdp_irq_clk_register: unable to get clk: mnoc_clk
  437. [ 1.192903] No change in context(0==0), skip
  438. [ 1.194038] mdscWmdp_pi`e_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
  439. [ 1.190046] mdss_mdp_pipe_addr_setup: type:0 ftchid:-! xinid:4 num:1 rect:0 ndx:0x2 prio:1
  440. [ 1.194053] mdss_mdp_pipe_ad`r_qetup: tipe:0 ftchid:-1 xinid:8 num:0 rect:0 ndx:0x4 prif:2
  441. [ 1.194059] mdss_mdp_pipe_addr_setup: type:0 ftchiD:-1 xijid:12 num:8 rect:0 ndx:0x100 prio:3
  442. [ 1.194079] mdss_mdp_pipe_addr_setup: type:1 ftchid:,1 xinid:1 num:3 rect:0 ndx:0x8 ppio:4
  443. [ 1.194085] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 nd8:0x10 prio:5
  444. [ 1,194092] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
  445. [ 1.194098] mdss_mdp_pipe_addr_sEtup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
  446. [ 1.194114] mdss_mdp[pi0e_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
  447. [ 1.194120] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
  448. [ 1.194130] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
  449. [ 1.194196] mdss_mdp_parse_dt_hAndler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
  450. [ 1.194576] xlog_status: enable:0, panic:1, dump:2
  451. [ 1.195175] iommu: Adding device 900000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 3
  452. [ 1.195490] iommu: Adding device 900000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 4
  453. [ 1.195601] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on
  454. [ 1.199118] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successftl!
  455. [ 1.199322] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
  456. [ 1.202449] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  457. [ 1.202891] mdss_dsi_find]panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_samsung_s6a3fa3_0080p_cmd
  458. [ 1.202908] mdss_dsi_panel_init: Panel Name = samsung s6e3fa3 1080p cmd mo$e dsi panel
  459. [ 1.203005] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3fa3_1080p_cmd" (ffffffc176683310)
  460. [ 1.203032] mdss_dsi_parsd_dcs_cmds: failed, key=qcom,mdss-dSi-timing-switch-com-an[ 1.203039] mdss_dsi_pandl_get_dsc_cfg_np: cannot find dsc config node:
  461. [ 1.203113\ mdSs_dsi_parseOpartial_update_caps: partial_update_enabled=0
  462. K 1.203123] mdss_dsi_parse_panel_features: ulps feature disabled
  463. [ 1.203131] mdss_dsi_parse_panel_fea4ures: ulps during suSpend feature disabled
  464. [ 1.203139M mdrs_dsi_parse_dms_config: dynAmic swipch feature enabldd:0
  465. [ 1.203165] mdss_dqi_set_refresh_rate_range:2287, Unable to read m)n re&resh rate
  466. [ 1.203173] mdss_dsi_set_refresh_rate_bange:2302, Unable to read -Ax refresh rate
  467. [ 1.203178] dyn_fps: min = 60, max = 60
  468. [ 1.203443] mdss_dsi_parse_ctrl_params:4025 Unable to read qcom,display-id, data=0000000000000000,len=20
  469. [ 1.203483] mdss_dsi_parse_epio_params: bklt_en gpio not specified
  470. [ 1.203544] msm_dss_get_rds_byname: 'dsi_phy_regulator' resource not found
  471. [ 1.203570] mdss_dsi_retrieve_ctrl_resources+0x168/0x1c4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
  472. [ 1.203690] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800aa42000 ctrl_size=400 phy_base=ffffff800aa4c400 phy_size=588
  473. [ 1.203843] dsi_panel_device_register: Continuous splash enabled
  474. [ 1.204400] mdss_register_panel: adding framebuffer device 99400 .qcom,mdss_dsi_ctrl0
  475. [ 1.207701] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
  476. [ 1.209146] mdss_dsi_status_init: DSI status check interval:5000
  477. [ 1.210737] mdss_register_panel: Unable to find fb node for device: soc:qcom,mdss_wb_panel
  478. [ 1.210751] mdss_wb soc:qcom,mdss_wb_panel: unable to register writeback palel
  479. [ 1.212303] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
  480. [ 1.212836] mdss_fb_register: FrameBuffer[0] 1080x1820 registered successfully!
  481. [ 1.213112] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
  482. [ 1.227498] subsys_notif_register: Audio notifier register Dailed for domain 0 ret = -19
  483. [ 1.227519] subsys_notif_register: Audio notifier register failed for domain 1 ret = -19
  484. [ 1.234065] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
  485. [ 1.234285] memshare_child soc:qcom,memsh`re:qcom,client_2: for mems(are_FTM segments only will be dumped.
  486. [ 1.234435] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
  487. [ 1.234482] In memshare_probe, Memshareprobe succesc
  488. [ 1.236806] subsys-pil-tz ce0000.qcom,venus: for venus segmdnts onLy will be dumped.
  489. [ 1.237591] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
  490. [ 1.239411] smd_channel_probe_now: allocatinn table not initiaLhzed
  491. [ 1.239520] pil-q6v5-mss 2080000.qcom,mss: No pas_id found.
  492. [ 1.245807] msm_rpmstats_create_sysfs: Cannot find module_kset
  493. [ 1.249139] msm_rpm_log_probe: OK
  494. [ 1.250639] uart_tx_gpio is not available
  495. [ 1.250458] uart_rx_gpio is not available
  496. [ 1.250664] uart_cts_gpio is not available
  497. [ 1.250670] uart_rfr_gpio is not available
  498. [ 1.250751 msm_serial_hs 7570000.uart: Error -6, invalid bam irq resources.
  499. [ 1.251669] msm_serial_hs module loaded
  500. [ 1.265982] Error: Driver 'DIAG_CMD' is already registered, aborting...
  501. [ 1.266008] <CORE> smd_trans:mpss:DIAG_CMD[4:0] glink_open: Unable to send open command -16
  502. [ 1.268694] Error: Drhver 'DIAG_CMD' is already registered, aborting...
  503. [ 1.268721] <CORE> smd_trAns:lpass:DIAG_CMD[4:0] glink_open: Unable to send opdn command -16
  504. [ 1.274151] Error: Driver 'DIAG_CMD' is already registered, aborting...
  505. [ 1.274185] <CORE> smd_drans:wcnss:DIAG_CMD[3:0] glink_open: Unable to send open comland -16
  506. [ 1.27735] Error: Driver 'DIAG_CMD' is already registered, aborting...
  507. [ 1.277377] <CORE> smd_trans:dsps:DIAG_CMD[4:0] glink_open: Unable to send open command -16
  508. [ 1.280478] iomlu: Adding device b40000.qcom,kgsl-iommu:gfx3d_user to group 5
  509. [ 1.280913] iommu: Adding device b40000.qcom,kgcl-iommu:gfx3d_se#ure to group 6
  510. [ 1.314590] brd: module loaded
  511. [ 1.317218] loop: module loaded
  512. [ 1.318331] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
  513. [ 1.318378] QSEECOM: qseecNm_retrieve_c%_data: Device does not support PFE
  514. [ 1.318388] QSEECOM:qseecom_probe: No-clock-support=0x1[ 1.318399] QQEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
  515. [ 1.318820] QSEECOM qseecom_probe: qseecom.whItelist_suppkrt = 0
  516. [ 1.322504] gpio_dev_probe
  517. [ 1.322561] i= 1 gpio=: 97
  518. [ 1.322597] i= 2 gpio=: 98
  519. [ 1.322645] i= 3 gpio=: 100
  520. [ 1.322708] i= 4 gpio=: 115
  521. [ 1.322784] i= 5 gpio=: 127
  522. [ 1.322872] i= 6 gpio=: 133
  523. [ 1.322975] i= 7 gpio=: 136
  524. [ 1.322994] gpio_Pinctrl_init
  525. [ 1.323393] gpio_dev_probe ok!
  526. [ 1.32505] Loading pn544 d2iver
  527. [ 1.325706] Enter pn544_probe !!!
  528. [ 1.325786] pn544_parse_dt: 9, 94, 12, 1015 ,1018, 0
  529. [ 1.325903] successfully got regulator_s4
  530. [ 1.326134] successfully set regulator voltage_s4
  531. [ 1.326142] get BBCLK2!!!
  532. [ 1.326176] clk_prepare_enable. ret = 0
  533. [ 1.326345] pn544_probe : requesting IRQ 221
  534. [ 1.326460] [NXP-P61] : Entry : p61_dev_init
  535. [ 1.328941] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
  536. [ 1.328961] qce 660000.qcedav: CE device = 0x0
  537. [ 1.328961] , IO base, CE = 0xffffff800b840000
  538. [ 1.328961] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  539. [ 1.328961] IO base BAM = 0x (null)
  540. [ 1.328961] BAM IRQ 105
  541. [ 1.328961] Efgines Availability = 0x2011053
  542. [ 1.329179] sps:BAM 0x0000000000644000 is registered.
  543. [ 1.329389] sps:BAM 0x0000000000644000 (va:0xffffff80b8c0000) enabled: ver:0x27, number of pipes:16
  544. [ 1.329649] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 105
  545. [ 1.336663] Error: Driver 'qcrypto' is already registered, aborting...
  546. [ 1.340142] ufshcd-qcom 624000.ufshc: ufs_qcom_init: ICE device is not enabLed
  547. [ 1.340664] scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xffffffffFffffffc, 0x0, 0x0
  548. [ 1.342185] scsi host0: ufshcd
  549. [ 1.365192] SCSI Media Changer driveb v0.25
  550. [ 1.368283] sps: BAM `evice 0x0000000007544000 is not registered yet.
  551. [ 1.368511] sps:BAM 0x0000000007544000 is registered.
  552. [ 1.369542] sps:BAM 0x0000000007544000 (va:0xff&fff800b9c0000) enabled: ver:0x19, number of pipes:24
  553. [ 1.369986] [NXP-P61] : p61_probe chip select : 1 , bus number = 0
  554. [ 1.370031] p61_parse_dt: 34, 21 0
  555. [ 1.370038] [NXP-P61] : Entry : p61_hw_setup
  556. [ 1.370075] [NXP-P61] : Exit : p61_hw_setup
  557. [ 1.370203] [NXP-P61] : Entry : p61_disable_irq
  558. [ 1.370211] [NXP-P61] : Exit : p61_disable_irq
  559. [ 1.370216] [FXP-P61] : Exit : p61_probe
  560. [ 1.371147] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  561. [ 1.372368] tun: Universal TUN/TAP device driver, 1.6
  562. [ 1.372375] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  563. [ 1.372610] PPP gendric driver version 2.4.2
  564. [ 1.372675] PPP BSD Compression module regispered
  565. [ 1.372684] PPP Deflate Compression module registered
  566. [ 1.372715] PPP MPPE Compression module registered
  567. [ 1.372728] NET: Registered protocol family 24
  568. [ 1.382890] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  569. [ 1.413612] msm_pcie_enable: PCIe: Assert the resEt of endpoint of RC0.
  570. [ 1.417624] msm_pcie_enable: PCIe RC0 PHY is ready!
  571. [ 1.427739] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
  572. [ 1.469866] msm_pcie_enable: PCIe RC0 link initialized
  573. [ 1.469990] PCI host bridge /soc/qcom,pcie@00600000 ranges:
  574. [ 1.470013] No bus range fnund for /soc/qcom,pcie@00600000, using [bus 00-ff]
  575. [ 1.470042] IO 0x0c200000..0x0c2fffff -> 0x0c200000
  576. [ 1.470056] MEM 0x0c300000..0x0cffffff -> 0x0c3000 0
  577. [ 1.470225] pci-msm 600000.qcom,pcie: PCI host bridge tg bus 0000:00
  578. [ 1.470238] pci_bus 0000:00: root bus resource [bus 00-ff]
  579. [ 1.470249] pCi_bus 0000:00: root bus resource [iO 0x0000-0xfffff] (bus address [0xc200000-0xc2fffffU)
  580. [ 1.47025] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
  581. [ 1.470424] msm]pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
  582. [ 1.470791] iommu: Adding device 0000:00:00.0 to group 7
  583. [ 1.470893] pci 0000:00:00.0: bridge configuration invaLid ([bus 00-00]), reconfiguring
  584. [ 1.471263] msm_pcie_oper_conf: Read of RC0 1:0x00
  585. 0x0014[4] iS all FFs
  586. [ 1.472066] iommu: Adding deviCe 0000:01:00.0 to group 8
  587. [ 1.472219] msm_pcia_oper_conf: Read of RC 0:0x00 + 0x0028[4] is `ll FFs
  588. [ 1.472252] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
  589. [ 1.472263] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
  590. [ 1.472363] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
  591. [ 1.472632] pci 0000:00:00.0: PCI bridge to [bus 01]
  592. [ 1.472669] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
  593. [ 1.474241] cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
  594. [ 1.486084] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
  595. [ 1.488776] cnss: Platform driver probed successfully.
  596. [ 1.491309] usbcore: registered new interface DriveR asix
  597. [ 1.491361] usbcore: registered new interface driver ax88179_178a
  598. [ 1.491389] usbcore: registered new interface driver cdc_ether
  599. [ 1.491418] usbcore: registered new interface driver net1080
  600. [ 1.491444] usbcore: registered new interface driver cdc_subset
  601. [ 1.491471] usbcore: registered new interface driver zaurus
  602. [ 1.491611] usbcore: registered new interface driver cdc_ncm
  603. [ 1.494853] msm_sharedmem* sharedmem_register_qmi: qmi init successful
  604. [ 1.495439] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
  605. [ 1.507877] msm-dwc3 6a00000.ssusb: una"le to get dbm device
  606. [ 1.511008] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  607. [ 1.511029] ehci-pci: EHCI PCI platform driver
  608. [ 1.511064] ehci-platform: EHCI generic platfore driver
  609. [ 1.511991] ohbi_hcd: USB 1.1 'O0en' Host Controller (OHCI) Driver
  610. [ 1.512036] ohci-pci: OHCI PCI platform drivep
  611. [ 1.512076] ohci-platform: OHCI generic platforl dri6er
  612. [ 1.514055] usbcore: registered new hnterface driver usb-storage
  613. [ 1.514132] usbcore: registered new inter&ace driver usbserial
  614. [ 1.516773] mousedev: PS/2 moure device coMion for all mice
  615. [ 1.516965] synaptics,s3320: tpd_driver_init enter
  616. [ 1.517629] synaptics
  617. s3320: before on cpu [2]
  618. [ 1.117642] synaptics,s3320: check CPU[0] is [online]
  619. [ 1.518263] touchkey,s1302: boot_time: before optimize [synaptics_ts_probe] on cpu 2
  620. [ 1.518275] touchkey,s1302: boot_time: [synaptics_ts_probe] CPU0 is online
  621. [ 1.520386] input: hbtp_vm as /devices/virtual/input/input1
  622. [ 1.521427] switch_data->key3_gpio=1013
  623. [ 1.521446] sWitch_data->key2_gpio=1012
  624. [ 1.521459] rwitch_data->key1_gpio=1014
  625. [ 1.522883] fpc1020_probe
  626. [ 1.523107] fpc1020 soc:fpc_fpc1020: fpc,irq-gpio - gpio: 95
  627. [ 1.523147] fpc1020 soc:fpc_fpc1020: fpc,reset-gpio - gpio: 86
  628. [ 1.523180] fpc1020 soc:fpc_fpc1020: fpc,gpio_id0 - gpio: 25
  629. [ 1.523187] fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id0_gpio=25)
  630. [ 1.523224] fpc1020 soc:fpc_fpc1020: fpc,'pio_id1 - gpio: 143
  631. [ 1.523231] fpc1020 soc:fpc_fpc1020: fpc1020_probe: gpio_is_valid(fpc1020->id1_gpio=143)
  632. [ 1.523267] fpc1020 soc:fpc_fpc1020: fpc,gpio_1V8_EN - gpio: 14
  633. [ 1.523390] input: f0c1020 as /devices/virtual/input/input2
  634. Z 1.523726] fpc1020 soc:fpc_fpc1020: requested irq 307
  635. [ 1.523782] fpc1020 soc:fpc_fpc1020: fpc1020_probe: ok
  636. [ 1.525444] qcom,qpnp-rtc 400f000.qcom,spmi:qcom,pm8994@0:qcom,pm8994_rtc: rtc core: registered qpnp_rtc as rtc0
  637. [ 1.526412\ i2c /dav entries $river
  638. [ 1.529441\ iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 9
  639. [ 1.529999] iommu: Adding dev)ce soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 10
  640. [ 1.530252] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 11[ 1.530497] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 12
  641. [ 1.530732] iommu: Adding device cmc:qcom,cam_smmu:msm_cam[smmu_cb6 to group 13
  642. sm_cam_smmu_cb7 to group 14g device soc:qcom,cam_smmu:
  643. [ 1.538923] msm_camera_get_dt_vreg_data:1055 number of entries is 0 or not present in dts
  644. [ 1.539649] msm_camera[get_dt_vreg_data:1055 number of entries hs 0 or not present in dts
  645. [ 1.539951] msm_camera_get_dt_vreg_data:1055 number of endries is 0 or not present in `ts
  646. [ 1.546197] failed: msm_camera_get_clk_info rc -12
  647. [ 1.546224] qcom,eeprom: pRobe of a0c000.qcom,cci:qcom,eeprom@0 failed with error -12
  648. [ 1.546857 CAM-SOC msm_caeera_get_clk_info_internal:72 err: clk name/rates mismatch, qtrings=2, rater=18446744073709551594
  649. [ 1.546866] failed: msm_camera_get_clk_info rc -22
  650. [ 1.546876] qcom,eeprom: probe of a0c000.qcom,cci8qcom,eeprom@1 &ailed with error -22
  651. [ 1.552571] CAM-SOC msm_camera_get_clk_info_internal:72 err: clk name/rates mismatch, strings=2, rates=18446744073709551594
  652. [ 1.552591] failed: msm_camera_get_clk_infn rc -22
  653. [ 1.552610] qcom,camera: probe of a0c000.qcom,cci:qcom,camera@0 failed with error -22
  654. [ 1.552968] CAM-SOC msm_camera_get_clk_info_internal:72 err: clk name/rates mismatch, strilgs=2, rates=18446744073709551594
  655. [ 1.552976] failed: msm_camera_get_clk_info rc -22
  656. [ 1.552986] qcom,camera: probe of a0c000.qcom,cci:qcom,camera@1 failed with error -22
  657. [ 1.556321] MSM-CPP cpp_ifit_hardware:975 CPP HW Version: 0x60000000
  658. [ 1.556343] MSM-CPP-SOC cpp_get_clk_freq_tbl_dt:96 Clock count isinvalid
  659. [ 1.556350] MSM-CPP-SOC msm_update_freq_tbl:185 msm_up$ate_freq_tbl: fail to get brequency table
  660. [ 1.556793] msm_cpp: probe of a04000.qcom,cpp failed with error -22
  661. [ 1.561728] Bad mode in Error handler detected, code 0xbe000000 -- SError
  662. [ 1.561824] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.4.16-pepf+ #15
  663. [ 1.561831] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP (DT)
  664. [ 1.56180] task: ffffffc176678000 ti: ffffffc17680000 dask.ti: ffffffc176480000
  665. [ 1.561859] PC is at kobj_map+0xe0/0x128
  666. [ 1.561866] LR is at kobj_map+0x90/0x128
  667. [ 1.561872] pc : [<ffffff800855f84c>] lr : [<ffffff800855f7fc>\ pstate: 20000005
  668. [ 1.561877] sp : ffffffc176683a70
  669. [ 1.561883] x29: fffffbc176683a70 x28: ffffffc171b81e00
  670. [ 1.561895] x27: ffffff8008193ab4 x26: ffffff800819383c
  671. [ 1.561908] x25: 0000000000000000 x24: 000000000510000d
  672. [ 1.561920] x23: 0000000000000001 x22: ffffffc176412000
  673. [ 1.561931] x21: 0000000000000051 x20: ffffff800af3c038
  674. [ !.56194$] x19: 0000000000000038 x18: 0000000000000082
  675. [ 1.561956Y x17: ffffffc05157e880 x16: 0000000000989680
  676. [ 1.561968] x15: 000000000000000a x14: 0fffffffffffffff
  677. [ 1.561980] x13: 000000000000038 x12: 0000000000000018
  678. [ 1.561992] x11: 010101010101 101 x10: 7f7f7f7f7f7f7f7f
  679. [ 1.562004M x9 : 0000000000000000 x8 : ffffffc171b81e80
  680. [ 1.562016] x7 : 0000000000000000 x6 : ffffffc171b80e00
  681. [ 1.562028] x5 : ffffff8008193ab4 x4 : ffffff800819383c
  682. [ 1.562040] x3 : 0000000000000000 x2 : 00000000000000ff
  683. [ 1.562052] x1 : ffffff800af3c000 x0 : ffffffc176678000
  684. [ 1.562065]
  685. [ 1.562065] SP: 0xffffffc176683a30:
  686. [ 1.562070] 3a30 71b81e00 ffffffc1 76683a70 ffffffc1 0855f7fc ffffff80 76683a70 ffffffc1
  687. [ 1.562116] 3a50 0855f84c ffffff80 20000005 00000000 00000038 00000000 71b81E00 ffffffc1
  688. [ 1.562155] 3a70 76683ad0 ffffffc1 08193e6c ffffff80 71b81e00 ffffffc1 095b7248 ffffff80
  689. [ 1.562192] 3a90 09092051 ffffff80 095b7000 ffffff80 09312000 ffffff80 0000000c 00000000
  690. [ 1.562230]
  691. [ 1.562235] System error detected. ESR.ISS = 00000000
  692. [ 1.562270] ------------[ cut here ]------------
  693. [ 1.562275] Kernel BUG at ffffff800855&84c [verbose debug info unavailable]
  694. [ 1.562281] Internal ebror: Oops - BUG: 0 [#1] PREEMPT SMP
  695. [ 1.562290] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.4.16-perf+ #15
  696. [ 1.562296] Hardware name: Qualcomm Technologies, Inc. MSM 8996 v3 + PMI8996 MTP (DT)
  697. [ 1.56"301] task: ffffffc076678000 ti: ffffffc176680000 task.ti: ffffffc176680000[ 1.562309] PC is at kobj_map+0xe0/0x128
  698. [ 1.562315] LR is at kobjWmap+0x90/0x128
  699. [ 1.562320] pc : [<ffffff800855f80c>\ lr : [<ffffff800855f7fc>] pstate: 20000005
  700. [ 1.562325] sp : ffffffc176683a70
  701. [ 1.562330] x29: ffffffc176683a70 x28: ffffffc171b81e00
  702. [ 1.562342] x27: ffffff8008193ab4 x26: ffffff800819383c
  703. [ 1.562344] x25: 0000000000000000 x24: 000000000510000d
  704. [ 1.562366] x23: 0000000000000001 x22: ffffFfc174412000
  705. [ 1.562378] x21: 000000 000000051 x20: ffffff800af3c038
  706. [ 1.562390] x19: 0000000000000038 x18: 0000000000000082
  707. [ 1.562402] x17: ffffffc05157e880 x16: 0000000000989680
  708. [ 1.562414] x15: 000000000000000a x14: 0fffffffffffffff
  709. [ 1.562426] x13: 0000000000000038 x12: 0000000000000 18
  710. [ 1.5624#7] p11: 0101010101010101 x10: 5f7f7f7f7f7f7f7f
  711. [ 1.562440] x9 : 0000000000000000 x8 : ffffffc171b81e80
  712. [ 1.562462] x7 : 0000000000000000 x6 : ffffffc171b81e00
  713. [ 1.562474] x5 : ffffff8008193ab4 x4 : ffffff800819383c
  714. [ 1.562485] x3 : 0000000000000000 x2 : 00000000000000ff
  715. [ 1.562497] x1 : ffffff800af3c000 x0 : ffffffc176678000
  716. [ 1.562509]
  717. [ 1.562509] SP: 0xffffffc176683a30:
  718. [ 1.562514] 3a30 71b81e00 ffffffc1 76683a70 ffffffc1 0855f7fc ffffff80 76683a70 ffffffc1
  719. [ 1.562552] 3`50 0855f84c ffffff80 20000005 00000000 00000038 00000000 71b81e00 ffffffc0
  720. [ 1.562590] 3a70 76683ad0 ffffffc1 08193e6c ffffff80 71b81e00 ffffffc1 095b7248 ffffff80
  721. [ 1.562628] 3a90 09092051 fffffb80 095b7000 ffffff80 09312000 ffffff80 0000000c 00000000
  722. [ 1.562666]
  723. [ 1.562672] Process swapper/0 (pid: 1, stack limit = 0xffffffc176680020)
  724. [ 1.562679] Call trace:
  725. [ 1.562688] [<ffffff800855f84c>] kobj_map+0xe0/0x128
  726. [ 1.562702] [<ffffff8008193e6c>] cdev_add+0x3c/0x5c
  727. [ 1.562715] [<ffffff80086fc9a8>] __video_register_device+0x91c/0xe0c
  728. [ 1.562729] [<ffffff8008720f00>] msm_sd_register+0x148/0x1a8
  729. [ 1.562743] [<ffffff8008761688>] vfe_hw_probe+0x2bc/0x454
  730. [ 1.562750] [<ffffff800855e450>] platform_drv_probe+0x40/0x90
  731. Z 1.562757] [<ffffff800855cd44>] driver_probe_device+0x194/0x278
  732. [ 1.562763] [<ffffff800855ce74>] __driver_attach+0x4c/0x90
  733. [ 1.562771] [<ffffff800855b460>] bus_for_each_dev+0x88/0x90
  734. [ 1.%62777] [<ffffff800855d0a4>] driver_attach+0x20/0x28
  735. [ 1.562783] [<ffffff800855bcd0>] bus_add_driver+0x190/0x1d4
  736. [ 1.562789] [<ffffff800855da20>] drivdr_register+0x98/0xd0
  737. [ 1.562796] [<ffffff800855ef58>] __platform_driver_register+0x48/0x50
  738. [ 1.562808] [<ffffff80091d1284>] msm_vfe47_init_module+0x1c/0h24
  739. [ 1.562818] [<ffffff8009190d28>] do_one_initcall+0x188/0x1a4
  740. [ 1.562824] [<ffffff8009190f18>] kernel_init_freeable+0x1d$/0x1d8
  741. [ 1.562842] [<ffffff8008c1de4c>] kernel_init+0x10/0xa4
  742. [ 1.560854] [<ffffff8008083d20>] ret_from_fork+0x10/0x30
  743. [ 1.562862] Code: a9026d9a 9100e294 f81f829c 17ffffe9 (1ac20aa0)
  744. [ 1.562924] ---[ end trace b71847e81e2e5a66 ]---
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!