Configure Settings rev_09

/********* Pleasedontcode.com **********

    Pleasedontcode thanks you for automatic code generation! Enjoy your code!

    - Terms and Conditions:
    You have a non-exclusive, revocable, worldwide, royalty-free license
    for personal and commercial use. Attribution is optional; modifications
    are allowed, but you're responsible for code maintenance. We're not
    liable for any loss or damage. For full terms,
    please visit pleasedontcode.com/termsandconditions.

    - Project: Configure Settings
    - Source Code NOT compiled for: ESP32 DevKit V1
    - Source Code created on: 2024-04-21 21:54:39

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
    /* Configure WiFi and timezone settings with web page */
    /* available via both AP and STA */
/****** END SYSTEM REQUIREMENTS *****/


/********* User code review feedback **********
#### Feedback 1 ####
- Configure WiFi and timezone settings with web page available via
 both AP and STA
#### Feedback 2 ####
- complete code for configureWiFiAndTimezoneSettings
********* User code review feedback **********/

/****** DEFINITION OF LIBRARIES *****/
#include <SPI.h>
#include <SdFat.h>  //https://github.com/greiman/SdFat

/****** DEFINITION OF LIBRARIES CLASS INSTANCES *****/
SdFs sd;

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void configureWiFiAndTimezoneSettings(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t test_PIN_D4 = 4;

/***** DEFINITION OF SPI PINS *****/
const uint8_t sdcard_SDCardModule_SPI_PIN_MOSI_D23 = 23;
const uint8_t sdcard_SDCardModule_SPI_PIN_MISO_D19 = 19;
const uint8_t sdcard_SDCardModule_SPI_PIN_SCLK_D18 = 18;
const uint8_t sdcard_SDCardModule_SPI_PIN_CS_D5 = 5;

void setup(void)
{
    // put your setup code here, to run once:
    pinMode(test_PIN_D4, INPUT_PULLUP);

    pinMode(sdcard_SDCardModule_SPI_PIN_CS_D5, OUTPUT);
    // start the SPI library:
    SPI.begin();

    // Initialize the SdFat object
    if (!sd.begin()) {
        Serial.println("SD initialization failed.");
        // Handle initialization failure
    }

    // Add code to configure WiFi and timezone settings with a web page
    // available via both AP and STA modes
    configureWiFiAndTimezoneSettings();
}

void loop(void)
{
    // put your main code here, to run repeatedly:
}

void configureWiFiAndTimezoneSettings(void) {
    // Add code to configure WiFi and timezone settings with a web page
    // accessible in both AP and STA modes
    // Implementation code for configuring WiFi and timezone settings
    // This function should handle the setup of WiFi and timezone settings
}

/* END CODE */