Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ~ ❯❯❯ sudo smartctl --all /dev/sda
- sudo: unable to resolve host g55vw
- [sudo] password for nick:
- smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-62-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Marvell based SanDisk SSDs
- Device Model: SanDisk SDSSDHII960G
- Serial Number: 155001401395
- LU WWN Device Id: 5 001b44 f2262ac33
- Firmware Version: X35510RL
- User Capacity: 960,197,124,096 bytes [960 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 T13/2015-D revision 3
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat May 13 05:37:13 2017 +06
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x11) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- No Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 10) minutes.
- SMART Attributes Data Structure revision number: 4
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0
- 9 Power_On_Hours 0x0032 253 100 --- Old_age Always - 3360
- 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 897
- 165 Total_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 12897943693
- 166 Min_W/E_Cycle 0x0032 100 100 --- Old_age Always - 1
- 167 Min_Bad_Block/Die 0x0032 100 100 --- Old_age Always - 19
- 168 Maximum_Erase_Cycle 0x0032 100 100 --- Old_age Always - 4
- 169 Total_Bad_Block 0x0032 100 100 --- Old_age Always - 0
- 171 Program_Fail_Count 0x0032 100 100 --- Old_age Always - 0
- 172 Erase_Fail_Count 0x0032 100 100 --- Old_age Always - 0
- 173 Avg_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 1
- 174 Unexpect_Power_Loss_Ct 0x0032 100 100 --- Old_age Always - 29
- 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
- 194 Temperature_Celsius 0x0022 068 039 --- Old_age Always - 32 (Min/Max 18/39)
- 199 SATA_CRC_Error 0x0032 100 100 --- Old_age Always - 0
- 230 Perc_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 98785165335
- 232 Perc_Avail_Resrvd_Space 0x0033 100 100 004 Pre-fail Always - 100
- 233 Total_NAND_Writes_GiB 0x0032 100 100 --- Old_age Always - 1319
- 234 Perc_Write/Erase_Ct_BC 0x0032 100 100 --- Old_age Always - 5981
- 241 Total_Writes_GiB 0x0030 253 253 --- Old_age Offline - 4426
- 242 Total_Reads_GiB 0x0030 253 253 --- Old_age Offline - 2616
- 244 Thermal_Throttle 0x0032 000 100 --- Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- Selective Self-tests/Logging not supported
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
