View difference between Paste ID: nzZdtyKU and w9WQGgEW

 3.2.12
 [UAP] Code changes to fix mem leak experienced in certain scenarios (reported HERE).
 [UAP] Modify bandsteering behaviour to fix issue with some 2G devices.
 [UAP] Refined Noise Floor calibration algorithm.
 [UAP] Make ntpclient more persistent.
 [UAP] Fix bug with WPA-Enterprise on 1st gen AC models.
 
 [UAP] Fix issue with discovery v1 response.
 [UAP] Fix multicast rate issue when 802.11b STA present.
 
 [UAPG1] Revert update base driver to 10.2.
 [UAP] Fix memory corruption, which caused a memory leak and possibly other issues.
 [UAP] Fix minor resource leak.
 [UAP] Revert disable CCK rates.
 [UAP] Changes to help with connectivity issue while STA roams (reported HERE).
 [UAP] Further tweaks to rate control logic.
 [UAP] Add support for AC-M/AC-M Pro multi-hop uplink.
 [UAP] Fix known issues with wireless uplink.
 
 [UAP] Fix memory leak when loading spectral data.
 [UAP] Fix bug with stamgr that caused minRSSI (and possibly other functions) to not work as expected.
 
 [UAP] Numerous backend fixes and changes.
 
 [UAP] Fix an issue with wireless uplink connectivity.
 [UAP] Fix an issue with wireless adoption.
 [UAP] Fixed issue with random disconnects.
 [UAP] Fixed issue where stations were improperly getting kicked while roaming subnets.
 [UAP] Fix open SSIDs on 1st gen AC models.
 [UAP] Add broadcast filter support.*
 [UAP] Add rate control framework.*
 
 [UAPG1/G2] Fix issue with TX buffer management. Should help with upgrade issues, and WLAN schedule problems due to stuck VAPs with log message `Timeout waiting for vap to stop` (UNIFI-374).***
 [UAPG1] Change default CPU clock to 400MHz for AR724x/QCA933x based UAP. Prevents second harmonic interference at 780MHz.
 [UAP] Revert DHCP broadcast to unicast conversion as default behaviour. It will be a configurable option in controller UI in a future release.
 [UAP] Fix a couple issues with current RADIUS VLAN code.
 [UAP] Enable dropbear DSS support.
 ***You may need to 1) set the radios to the disabled WLAN group, and then 2) reboot each UAP to be able to upgrade to this firmware. Once on this firmware, you should have no problems upgrading to newer firmware.
 
 [UAP] Fix the issue which caused ZH enabled APs to be soft bricked after upgrade to 3.7.47.
 [UAP] Backport Busybox commit to fix the issue when DHCP search domain started with a number (reported HERE).
 
 [UAP] Wireless uplink improvements.
 [UAP] Guest mode broadcast filter improvements.
 [UAP] Fix a memory leak.
 [UAP] Various tweaks to improve wireless uplink function.
 [UAP] Add jq for CLI json processing.
 
 [UAP] Fix MAC ACL, as well as block STA function when bandsteering is enabled.
 [UAP] Various bug fixes and improvements.
 [UAP] Add outdoor option.**
 [UAP] Improve logging when using bandsteering.
 [UAP] Disable IPv6 on VLAN bridge interfaces by default, to prevent multiple interfaces sharing the same IP.
 
 [UAP] Fix an issue with hotspot portal when using broadcast/multicast filter.
 [UAP] Various backend improvements.
 [UAP] Add DFS event alerts.*
 [UAP] Fix a bug in the rate control algorithm.
 [UAP] Fix Termination-Action so it behaves as per RFC3580.
 
 [UAPG1/G2] 2.4G performance improvements.
 [UAPG1] Fix for initialization issues on AR724x/QCA933x based UAPs.
 [UAPG1] Fix issue with missing ca-certs package on some models.
 
 [UAP] Fix the logic of disabling GTK if roaming is enabled.
 [UAP] Fix a bug in uplink-monitor.
 [UAP] Fix WPA/WPA2 PSK with 64 HEX characters.*
 [UAPG1] Enable wireless uplink v3 for models which support wireless uplink.*
 
 [UAP] Add backend for 802.1X MAC authentication bypass support.*
 [UAP] Add Framed-IP-Address to RADIUS accounting data.
 [UAP] Add NAS-IP-Address to RADIUS data.
 [UAP] Various backend fixes.
 
 3.8.14
 [UAP] Fix a RADIUS related bug with fast-apply.
 [UAP] Backend improvement.