View difference between Paste ID: m3w27MxL and UQcKmY1f

 local event = require("event")
 local term = require("term")
 local os = require("os")
 local com = require("component")
 local keyb = require("keyboard")
 local gpu = com.gpu
 
 local fileName = "/home/gtadrs15.txt"
 local cfgName = "/home/DracReactorConfig.cfg"
 
 local function parseNum(str)
 local n = ""
 for i=1,#str do
 local ch = str:byte(i,i)
 if ch >= 48 and ch <= 57 or ch == 46 then
 n = n..string.char(ch)
 end
 end
 if n ~= "" then
 return tonumber(n)
 else return n
 end
 end
 
 local cfg = {}
 local confnames =
 {
 [1] = "default_interval",
 [2] = "ctrl_interval",
 [3] = "shift_interval",
 [4] = "ctrlShift_interval",
 [5] = "shield",
 [6] = "tempCriticalEdge",
 [7] = "forceModeTempLowEdge",
 [8] = "forceModeStepCase",
 [9] = "forceModeStep",
 [10] = "safeModeTempWaitEdge",
 [11] = "safeModeTempToWaitEdge",
 [12] = "safeModeStepCase",
 [13] = "safemodeStep"
 }
 
 local function readParse(name)
 local file = io.open(name,"r")
 if file then
 local tab = {}
 local i = 1
 while true do
 local str = file:read("*l")
 if str == nil then
 break
 end
 if parseNum(str) ~= "" then
 tab[i] = parseNum(str)
 i=i+1
 end
 end
 return tab
 else
 return false
 end
 end
 
 local function configWrite(name)
 if not readParse(name) then
 local file = io.open(name,"w")
 file:write([[
 -- Интервалы для кнопок +/-
 default_interval = 1000
 ctrl_interval = 5000
 shift_interval = 10000
 ctrlShift_interval = 20000
 -- Автономный режим:
 -- Основные константы
 shield = 25 - Щиты будут автоматически поддерживаться на этом уровне ( в %)
 tempCriticalEdge = 8100 -- Если температура превысит это значение, программа экстренно понизит поток вывода;
 -- Форсированный режим
 forceModeTempLowEdge = 7500 -- Пока температура не превысит это значение, программа будет работать в форсированном режиме, иначе - перейдет в безопасный режим;
 forceModeStepCase = 5000  -- Если разница между текущей выработкой энергии и выставленным потоком превысит это значение, то к потоку добавится
 forceModeStep = 20000 -- это значение
 -- безопасный режим
 safeModeTempWaitEdge = 8000 -- Если температура превысит это значение, программа будет ожидать,
 safeModeTempToWaitEdge = 7850 -- пока температура не понизится до этого значения;
 safeModeStepCase = 0 -- Если разница между текущей выработкой энергии и выставленным потоком превысит это значение, то к потоку добавится
 safemodeStep = 8000 -- это значение]])
 file:close()
 elseif #readParse(name) < 13 then
 local file = io.open(name,"w")
 file:write([[
 -- Интервалы для кнопок +/-
 default_interval = 1000
 ctrl_interval = 5000
 shift_interval = 10000
 ctrlShift_interval = 20000
 -- Автономный режим:
 -- Основные константы
 shield = 25 - Щиты будут автоматически поддерживаться на этом уровне ( в %)
 tempCriticalEdge = 8100 -- Если температура превысит это значение, программа экстренно понизит поток вывода;
 -- Форсированный режим
 forceModeTempLowEdge = 7500 -- Пока температура не превысит это значение, программа будет работать в форсированном режиме, иначе - перейдет в безопасный режим;
 forceModeStepCase = 5000  -- Если разница между текущей выработкой энергии и выставленным потоком превысит это значение, то к потоку добавится
 forceModeStep = 20000 -- это значение
 -- безопасный режим
 safeModeTempWaitEdge = 8000 -- Если температура превысит это значение, программа будет ожидать,
 safeModeTempToWaitEdge = 7850 -- пока температура не понизится до этого значения;
 safeModeStepCase = 0 -- Если разница между текущей выработкой энергии и выставленным потоком превысит это значение, то к потоку добавится
 safemodeStep = 8000 -- это значение]])
 file:close()
 elseif cfg.default_interval ~= nil and
 cfg.ctrl_interval ~= nil and
 cfg.shift_interval ~= nil and
 cfg.ctrlShift_interval ~= nil and
 cfg.shield ~= nil and
 cfg.tempCriticalEdge ~= nil and
 cfg.forceModeTempLowEdge ~= nil and
 cfg.forceModeStepCase ~= nil and
 cfg.forceModeStep ~= nil and
 cfg.safeModeTempWaitEdge ~= nil and
 cfg.safeModeTempToWaitEdge ~= nil and
 cfg.safeModeStepCase ~= nil and
 cfg.safemodeStep ~= nil then
 
 local file = io.open(name,"w")
 file:write(string.format(
 [[
 -- Интервалы для кнопок +/-
 default_interval = %d
 ctrl_interval = %d
 shift_interval = %d
 ctrlShift_interval = %d
 -- Автономный режим:
 -- Основные константы
 shield = %0.2f - Щиты будут автоматически поддерживаться на этом уровне ( в %)
 tempCriticalEdge = %d -- Если температура превысит это значение, программа экстренно понизит поток вывода;
 -- Форсированный режим
 forceModeTempLowEdge = %d -- Пока температура не превысит это значение, программа будет работать в форсированном режиме, иначе - перейдет в безопасный режим;
 forceModeStepCase = %d -- Если разница между текущей выработкой энергии и выставленным потоком превысит это значение, то к потоку добавится
 forceModeStep = %d -- это значение
 -- Безопасный режим
 safeModeTempWaitEdge = %d -- Если температура превысит это значение, программа будет ожидать,
 safeModeTempToWaitEdge = %d -- пока температура не понизится до этого значения;
 safeModeStepCase = %d -- Если разница между текущей выработкой энергии и выставленным потоком превысит это значение, то к потоку добавится
 safemodeStep = %d -- это значение]],
 cfg.default_interval,
 cfg.ctrl_interval,
 cfg.shift_interval,
 cfg.ctrlShift_interval,
 cfg.shield,
 cfg.tempCriticalEdge,
 cfg.forceModeTempLowEdge,
 cfg.forceModeStepCase,
 cfg.forceModeStep,
 cfg.safeModeTempWaitEdge,
 cfg.safeModeTempToWaitEdge,
 cfg.safeModeStepCase,
 cfg.safemodeStep
 ))
 file:close()
 end
 end
 
 local function makeConfig(tab,tab2)
 local config = {}
 for i=1,#tab do
 config[i] = i
 end
 local iter = 1
 for k,v in pairs(config) do
 k = tab[iter]
 v = tab2[iter]
 config[tostring(k)] = v
 iter = iter + 1
 end
 for i=1,#tab do
 config[i] = nil
 end
 return config
 end
 
 local function fileCreate(name)
 local file = io.open(name,"a")
 file:close()
 end
 
 configWrite(cfgName)
 cfg = makeConfig(confnames,readParse(cfgName))
 
 local function fileWrite(name,uadr,dadr)
 local file = io.open(name,"w")
 file:write(uadr.."\n"..dadr.."\n")
 file:close()
 end
 
 local function fileRead(name)
 local file = io.open(name,"r")
 local uadr,dadr = file:read("*l","*l")
 file:close()
 return uadr,dadr
 end
 
 local color = { }
 color["red"]   = 0xFF0000
 color["green"] = 0x00FF00
 color["yellow"] = 0xFFFF00
 color["skyblue"] = 0x00FFFF
 color["black"]   = 0x000000
 color["grey"]   = 0xC0C0C0
 color["blue"]   = 0x000080
 color["white"] = 0xFFFFFF
 
 local rback = gpu.getBackground()
 local rfore = gpu.getForeground()
 
 local handleMain
 local handleOptions
 local handleStart
 
 local menuItem = {}
 menuItem["options"] =
 {
 ["name"] ="Настройки |",
 ["x"] = 1,
 ["y"] = 2
 }
 menuItem["save"] =
 {
 ["name"] ="Сохранить |",
 ["x"] = 1,
 ["y"] = 2
 }
 menuItem["cancel"] =
 {
 ["name"] =" Отменить",
 ["x"] = 12,
 ["y"] = 2
 }
 
 local xz,yz = gpu.maxResolution()
 gpu.setResolution(80,25)
 
 gpu.setBackground(0xF0F0F0)
 gpu.setForeground(0x000000)
 
 local prog = true
 local addCord = {}
 local subCord = {}
 local num = {}
 num["name"] = "Число : "
 num["value"] = 0
 local OptionDefault = {}
 local OptionCtrl = {}
 local OptionShift = {}
 local OptionCtrlShift = {}
 local OptionShield = {}
 OptionDefault["value"] = cfg.default_interval
 OptionCtrl["value"] = cfg.ctrl_interval
 OptionShift["value"] = cfg.shift_interval
 OptionCtrlShift["value"] = cfg.ctrlShift_interval
 OptionShield["value"] = cfg.shield
 
 local flux = {}
 flux["up"] =
 {
 ["adr"] = nil,
 ["x"] = nil,
 ["y"] = nil
 }
 flux["down"] =
 {
 ["adr"] = nil,
 ["x"] = nil,
 ["y"] = nil
 }
 
 local infcord =
 {
 ["status"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	},
 ["temp"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	},
 ["generation"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	},
 ["flow"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	},
 ["puregen"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	},
 ["drain"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	},
 ["fstrth"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	},
 ["esturn"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	},
 ["fuel"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	},
 ["fuelconv"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	},
 ["core"] =
 	{
 	["value"] = nil,
 	["x"] = nil,
 	["y"] = nil
 	}
 }
 
 local button =
 {
 ["continue"] =
 	{
 	["name"] = "Продолжить",
 	["x"] = nil,
 	["y"] = nil
 	},
 ["change"] =
 	{
 	["name"] = "Изменить",
 	["x"] = nil,
 	["y"] = nil
 	},
 ["add"] =
 	{
 	["name"] = " + ",
 	["x"] = nil,
 	["y"] = nil
 	},
 ["sub"] =
 	{
 	["name"] = " - ",
 	["x"] = nil,
 	["y"] = nil
 	},
 ["start"] =
 	{
 	["name"] = "Запустить реактор",
 	["x"] = nil,
 	["y"] = nil,
 	["visible"] = nil
 	},
 ["stop"] =
 	{
 	["name"] = "Выключить реактор",
 	["x"] = nil,
 	["y"] = nil,
 	["visible"] = nil
 	},
 ["charge"] =
 	{
 	["name"] = "Зарядить реактор ",
 	["x"] = nil,
 	["y"] = nil,
 	["visible"] = nil
 	},
 ["autoon"] =
 	{
 	["name"] = "Включен",
 	["x"] = nil,
 	["y"] = nil,
 	},
 ["autooff"] =
 	{
 	["name"] = "Выключен",
 	["x"] = nil,
 	["y"] = nil,
 	}
 }
 
 local ops = true
 local upchoose = true
 local downchoose = true
 local conf = false
 local buts = false
 local canedit = true
 local canclose = true
 local temprise
 local autostate = false
 
 local upadr = nil
 local downadr = nil
 
 printf = function (s,...)
 return io.write(s:format(...))
 end
 
 local function guiWrite(x,y,cf,cb,s,...)
 term.setCursor(x,y)
 if cf >=0 and cb >=0 then
 local fg = gpu.getForeground()
 local bg = gpu.getBackground()
 gpu.setForeground(cf)
 gpu.setBackground(cb)
 printf(s,...)
 gpu.setForeground(fg)
 gpu.setBackground(bg)
 elseif cb <0 and cf>=0 then
 local fg = gpu.getForeground()
 gpu.setForeground(cf)
 printf(s,...)
 gpu.setForeground(fg)
 elseif cf < 0 and cb >= 0 then
 local bg = gpu.getBackground()
 printf(s,...)
 gpu.setBackground(bg)
 else
 printf(s,...)
 end
 end
 
 local function getCord(param)
 param.x,param.y = term.getCursor()
 return param.x,param.y
 end
 
 local function guiClear(y)
 local fg = gpu.getForeground()
 local bg = gpu.getBackground()
 gpu.setForeground(color.black)
 gpu.setBackground(color.grey)
 for i=y+3,3,-1 do
 term.setCursor(1,i)
 term.clearLine()
 end
 gpu.setForeground(fg)
 gpu.setBackground(bg)
 end
 
 local function makeButton(x,y,text)
 term.setCursor(x,y)
 local fg = gpu.getForeground()
 local bg = gpu.getBackground()
 gpu.setBackground(0x000000)
 gpu.setForeground(0xFFFFFF)
 printf(text)
 gpu.setBackground(bg)
 gpu.setForeground(fg)
 
 end
 
 local function show(fc,bc,param)
 local fg = gpu.getForeground()
 local bg = gpu.getBackground()
 term.setCursor(param.x,param.y)
 gpu.setForeground(fc)
 gpu.setBackground(bc)
 local st = " "
 for i = 0,#tostring(param.value) do
 st=st.." "
 end
 gpu.set(param.x,param.y,st)
 printf("%d",param.value)
 gpu.setForeground(fg)
 gpu.setBackground(bg)
 end
 
 local function numformat(n)
 local s = tostring(n)
 if n >= 1000 and n < 1000000 then
 local t = s:sub(1,#s-3)
 local e = s:sub(#s-2)
 s = t.." "..e.."  "
 return s
 elseif n >= 1000000 then
 local m = s:sub(1,#s-6)
 local t = s:sub(#s-5,#s-3)
 local e = s:sub(#s-2)
 s = m.." "..t.." "..e.."  "
 return s
 else
 s=s.."  "
 return s
 end
 end
 
 local function coreformat()
 local num = com.draconic_rf_storage.getEnergyStored()
 if num > 10^12 then
 return string.format(" Накоплено в ядре: %0.3f T   \n",num/10^12)
 elseif num > 10^9 then
 return string.format(" Накоплено в ядре: %0.3f B   \n",num/10^9)
 elseif num > 10^6 then
 return string.format(" Накоплено в ядре: %0.3f M   \n",num/10^6)
 elseif num > 10^3 then
 return string.format(" Накоплено в ядре: %0.3f K   \n",num/10^3)
 else
 return string.format(" Накоплено в ядре: %d   \n",num)
 end
 end
 
 -- Анализ и корректировка запомненных адресов
 local function proxyCheck()
 flux.up.adr,flux.down.adr = fileRead(fileName)
 if flux.up.adr ~= nil and flux.down.adr ~= nil then
 if com.get(flux.up.adr) ~= nil and com.get(flux.down.adr) ~=nil then
 return true
 elseif com.get(flux.up.adr) == nil and com.get(flux.down.adr) == nil then
 flux.up.adr = nil
 flux.down.adr = nil
 return false
 elseif com.get(flux.up.adr) == nil then
 for adrs in com.list("flux_gate") do
 if adrs ~= flux.down.adr then
 flux.up.adr = adrs
 end
 end
 fileWrite(fileName,flux.up.adr,flux.down.adr)
 return true
 elseif com.get(flux.down.adr) == nil then
 for adrs in com.list("flux_gate") do
 if adrs ~= flux.up.adr then
 flux.down.adr = adrs
 end
 end
 fileWrite(fileName,flux.up.adr,flux.down.adr)
 return true
 end
 end
 end
 
 local function checkButtons()
 local inf = reactor.getReactorInfo()
 infcord.status.value = inf.status
 if infcord.status.value == "offline" then
 guiWrite(button.charge.x,button.charge.y,color.skyblue,color.black,"%s",button.charge.name)
 button.charge.visible = true
 elseif infcord.status.value == "stopping" then
 if (inf.energySaturation/inf.maxEnergySaturation)*100 >=50 and (inf.fieldStrength/inf.maxFieldStrength)*100 >= 50 and inf.temperature > 2000 then
 guiWrite(button.start.x,button.start.y,color.green,color.black,"%s",button.start.name)
 button.start.visible = true
 elseif infcord.status.value ~= "charging" then
 guiWrite(button.charge.x,button.charge.y,color.skyblue,color.black,"%s",button.charge.name)
 button.charge.visible = true
 end
 elseif infcord.status.value == "online" or infcord.status.value == "charging" then
 guiWrite(button.stop.x,button.stop.y,color.red,color.black,"%s",button.stop.name)
 button.stop.visible = true
 elseif infcord.status.value == "charged" then
 guiWrite(button.start.x,button.start.y,color.green,color.black,"%s",button.start.name)
 button.start.visible = true
 guiWrite(button.stop.x,button.stop.y,color.red,color.black,"%s",button.stop.name)
 button.stop.visible = true
 end
 end
 -- Инициализация программы, анализ и настройка всей технической белеберды
 local function screenStart()
 handleMain = false
 handleOptions = false
 handleStart = true
 local x,y = gpu.getResolution()
 gpu.setBackground(0xC0C0C0)
 gpu.setForeground(0x000000)
 term.clear()
 gpu.setBackground(0x000080)
 gpu.setForeground(0xFFFFFF)
 term.clearLine()
 printf("Draconic reactor control made by Freeazzy from McSkill.ru   (Preparation)\n")
 gpu.setBackground(0xFFFFFF)
 gpu.setForeground(0x000000)
 term.clearLine()
 printf("Это страница для настройки программы при первом запуске или после сбоя")
 gpu.setBackground(0xFF0000)
 gpu.set(x-2,1," X ")
 gpu.setBackground(0xC0C0C0)
 term.setCursor(1,4)
 if not com.isAvailable("draconic_reactor") then
 printf("подключите адаптер к стабилизатору реактора")
 while not com.isAvailable("draconic_reactor") do
 os.sleep(0)
 if not ops then return end
 end
 guiClear(2)
 end
 reactor = com.draconic_reactor
 local i = 0
 for address in com.list("flux_gate") do
 i=i+1
 end
 if i<2 then
 printf("Подключите адаптеры к обоим флюкс-гейтам")
 
 while true do
 if not ops then return end
 i=0
 for address in com.list("flux_gate") do
 i=i+1
 end
 if i == 2 then
 break
 end
 os.sleep(0)
 end
 guiClear(2)
 end
 proxyCheck()
 if flux.up.adr == nil or flux.down.adr == nil then
 while not conf do
 buts = false
 if not ops then return end
 i=1
 flux[1]=
 {
 ["adr"]=nil,
 ["x"]=nil,
 ["y"]=nil
 }
 flux[2]=
 {
 ["adr"]=nil,
 ["x"]=nil,
 ["y"]=nil
 }
 printf("  Адреса подключенных флюкс-гейтов\n\n")
 for adr in com.list("flux_gate") do
 flux[i].x,flux[i].y = term.getCursor()
 flux[i].adr = adr
 printf ("  "..flux[i].adr.."\n\n")
 i=i+1
 end
 printf("  Выберите адрес флюкс-гейта, отвечающего за выработку энергии\n")
 
 while upchoose do
 os.sleep(0)
 if not ops then return end
 end
 printf("  Выберите адрес флюкс-гейта, отвечающего за стабилизацию реактора\n")
 
 while downchoose do
 os.sleep(0)
 if not ops then return end
 end
 printf("\n  адрес энергетического гейта :  %s\n",flux.up.adr)
 printf("  адрес стабилизирующего гейта : %s\n",flux.down.adr)
 
 if reactor.getReactorInfo().status == "offline" then
 com.proxy(com.get(flux.up.adr)).setSignalHighFlow(0)
 com.proxy(com.get(flux.up.adr)).setSignalLowFlow(535000)
 com.proxy(com.get(flux.down.adr)).setOverrideEnabled(true)
 end
 
 button.continue.x,button.continue.y = term.getCursor()
 makeButton(button.continue.x+8,button.continue.y+1,button.continue.name)
 button.change.x,button.change.y = term.getCursor()
 makeButton(button.change.x+2,button.change.y,button.change.name)
 while not buts do
 os.sleep(0)
 if not ops then return end
 end
 if flux.up.adr ~= nil and flux.down.adr ~= nil then
 upgate = com.proxy(com.get(flux.up.adr))
 downgate = com.proxy(com.get(flux.down.adr))
 fileWrite(fileName,flux.up.adr,flux.down.adr)
 end
 end
 else
 upgate = com.proxy(com.get(flux.up.adr))
 downgate = com.proxy(com.get(flux.down.adr))
 end
 
 end
 -- Экран настроек
 local function screenOptions()
 handleMain = false
 handleStart = false
 handleOptions = true
 local x,y = gpu.getResolution()
 gpu.setBackground(0xC0C0C0)
 gpu.setForeground(0x000000)
 term.clear()
 gpu.setBackground(0x000080)
 gpu.setForeground(0xFFFFFF)
 term.clearLine()
 printf("Draconic reactor control made by Freeazzy from McSkill.ru   (Options)\n")
 gpu.setBackground(0xFFFFFF)
 gpu.setForeground(0x000000)
 term.clearLine()
 menuItem.save.x,menuItem.save.y =term.getCursor()
 printf(menuItem.save.name)
 menuItem.cancel.x,menuItem.cancel.y =term.getCursor()
 printf(menuItem.cancel.name)
 gpu.setBackground(0xFF0000)
 gpu.set(x-2,1," X ")
 gpu.setBackground(0xC0C0C0)
 term.setCursor(1,4)
 printf(" Интервал для щелчка: ")
 OptionDefault["x"],OptionDefault["y"] = term.getCursor()
 printf("%d\n",OptionDefault.value)
 printf(" Интервал для CTRL: ")
 OptionCtrl["x"],OptionCtrl["y"] = term.getCursor()
 printf("%d\n",OptionCtrl.value)
 printf(" Интервал для SHIFT: ")
 OptionShift["x"],OptionShift["y"] = term.getCursor()
 printf("%d\n",OptionShift.value)
 printf(" Интервал для CTRL+SHIFT: ")
 OptionCtrlShift["x"],OptionCtrlShift["y"] = term.getCursor()
 printf("%d\n",OptionCtrlShift.value)
 printf(" Уровень щитов: ")
 OptionShield["x"],OptionShield["y"] = term.getCursor()
 printf("%d\n",OptionShield.value)
 end
 -- Инициализация главного экрана
 local function screenMain()
 handleOptions = false
 handleStart = false
 handleMain = true
 local x,y = gpu.getResolution()
 local inf = reactor.getReactorInfo()
 infcord.status.value = inf.status
 gpu.setBackground(0xC0C0C0)
 gpu.setForeground(0x000000)
 term.clear()
 gpu.setBackground(0x000080)
 gpu.setForeground(0xFFFFFF)
 term.clearLine()
 printf("Draconic reactor control made by Freeazzy from McSkill.ru\n")
 gpu.setBackground(0xFFFFFF)
 gpu.setForeground(0x000000)
 term.clearLine()
 menuItem.options.x,menuItem.options.y =term.getCursor()
 printf(menuItem.options.name)
 gpu.setBackground(0xFF0000)
 gpu.set(x-2,1," X ")
 gpu.setBackground(0xC0C0C0)
 term.setCursor(1,4)
 gpu.setBackground(0x909090)
 printf(" Температура:     ")
 gpu.setBackground(0xC0C0C0)
 printf(" ")
 getCord(infcord.temp)
 guiWrite(infcord.temp.x,infcord.temp.y,-1,-1,"%0.2f\n",inf.temperature)
 printf(" Вырабатывает:     ")
 getCord(infcord.generation)
 guiWrite(infcord.generation.x,infcord.generation.y,-1,-1,"%s  \n",numformat(inf.generationRate))
 gpu.setBackground(0x909090)
 printf (" Поток:           ")
 gpu.setBackground(0xC0C0C0)
 printf(" ")
 getCord(infcord.flow)
 infcord.flow.value = upgate.getFlow()
 guiWrite(infcord.flow.x,infcord.flow.y,-1,-1,"%s  ",numformat(infcord.flow.value))
 getCord(button.add)
 makeButton(button.add.x + 4, button.add.y ,button.add.name)
 getCord(button.sub)
 makeButton(button.sub.x+2,button.sub.y,button.sub.name)
 
 printf("\n")
 printf (" Итоговая мосч:    ")
 getCord(infcord.puregen)
 guiWrite(infcord.puregen.x,infcord.puregen.y,-1,-1,"%s  \n",numformat(inf.generationRate - downgate.getFlow()))
 gpu.setBackground(0x909090)
 printf (" Поглощает:       ")
 gpu.setBackground(0xC0C0C0)
 printf(" ")
 getCord(infcord.drain)
 guiWrite(infcord.drain.x,infcord.drain.y,-1,-1,"%s  \n",numformat(downgate.getFlow()))
 
 printf (" Мощность поля:    ")
 getCord(infcord.fstrth)
 if inf.maxFieldStrength > 0 then
 guiWrite(infcord.fstrth.x,infcord.fstrth.y,-1,-1,"%d / %d (%0.2f %%) \n",inf.fieldStrength -inf.fieldDrainRate,inf.maxFieldStrength,((inf.fieldStrength-inf.fieldDrainRate)/inf.maxFieldStrength)*100)
 else
 guiWrite(infcord.fstrth.x,infcord.fstrth.y,-1,-1,"0 / 0 (0 %%) \n")
 end
 gpu.setBackground(0x909090)
 printf (" Насыщенность:    ")
 gpu.setBackground(0xC0C0C0)
 printf(" ")
 getCord(infcord.esturn)
 if inf.maxEnergySaturation > 0 then
 guiWrite(infcord.esturn.x,infcord.esturn.y,-1,-1,"%d / %d (%0.2f %%) \n",inf.energySaturation,inf.maxEnergySaturation,(inf.energySaturation/inf.maxEnergySaturation)*100)
 else
 guiWrite(infcord.esturn.x,infcord.esturn.y,-1,-1,"0 / 0 (0 %%) \n")
 end
 printf (" топливо:          ")
 getCord(infcord.fuel)
 
 if inf.fuelConversion/inf.maxFuelConversion < 0.78 then
 guiWrite(infcord.fuel.x,infcord.fuel.y,-1,-1,"%d / %d (%0.2f %%)                           \n",inf.fuelConversion,inf.maxFuelConversion,(inf.fuelConversion/inf.maxFuelConversion)*100)
 else
 if inf.maxFuelConversion > 0 then
 if inf.status == "online" or inf.status == "charging" or inf.status == "charged" then
 guiWrite(infcord.fuel.x,infcord.fuel.y,color.red,-1,"%d / %d (%0.2f %%) Критический уровень топлива\n",inf.fuelConversion,inf.maxFuelConversion,(inf.fuelConversion/inf.maxFuelConversion)*100)
 else
 guiWrite(infcord.fuel.x,infcord.fuel.y,-1,-1,"%d / %d (%0.2f %%) Критический уровень топлива\n",inf.fuelConversion,inf.maxFuelConversion,(inf.fuelConversion/inf.maxFuelConversion)*100)
 end
 else
 guiWrite(infcord.fuel.x,infcord.fuel.y,-1,-1,"0 / 0 (0 %%)                           \n")
 end
 end
 gpu.setBackground(0x909090)
 printf (" расход топлива:  ")
 gpu.setBackground(0xC0C0C0)
 printf(" ")
 getCord(infcord.fuelconv)
 guiWrite(infcord.fuelconv.x,infcord.fuelconv.y,-1,-1,"%d\n",inf.fuelConversionRate)
 
 getCord(infcord.core)
 if com.isAvailable("draconic_rf_storage") then
 guiWrite(infcord.core.x,infcord.core.y,-1,-1,coreformat())
 end
 printf("\n")
 getCord(button.stop)
 getCord(button.start)
 getCord(button.charge)
 button.start.y = button.stop.y+2
 button.charge.y = button.stop.y +2
 printf("                   Автономный режим: ")
 getCord(button.autoon)
 getCord(button.autooff)
 if not autostate then
 guiWrite(button.autooff.x,button.autooff.y,color.red,color.black,"%s\n",button.autooff.name)
 else
 guiWrite(button.autoon.x,button.autoon.y,color.green,color.black,"%s\n",button.autoon.name)
 end
 checkButtons()
 
 end
 local screen = {}
 screen["main"] = screenMain
 screen["options"] = screenOptions
 
 local function editOption(param)
 local rd = true
 while rd do
 gpu.fill(param.x, param.y, #tostring(param.value), 1, " ")
 term.setCursor(param.x,param.y)
 
 param.value = term.read(false,false)
 local val = tonumber(param.value)
 if val then
 show(color.black,color.grey,param)
 rd = false
 end
 end
 canedit = true
 canclose = true
 screen.options()
 end
 
 local function add(n,i)
 n.value=n.value+i
 upgate.setSignalLowFlow(n.value)
 return n.value
 end
 
 local function sub(n,i)
 term.setCursor(n.x,n.y)
 n.value=n.value-i
 return n.value
 end
 -- Обновление информации на экране + анализ поведения температуры
 local function refreshInfo()
 local inf = reactor.getReactorInfo()
 infcord.status.value = inf.status
 local tbuf1 = inf.temperature
 os.sleep(0.1)
 local tbuf2 = reactor.getReactorInfo().temperature
 if handleMain then
 if tbuf2>tbuf1 then
 guiWrite(infcord.temp.x,infcord.temp.y,color.red,-1,"%0.2f \n",inf.temperature)
 temprise = true
 elseif tbuf2<tbuf1 then
 guiWrite(infcord.temp.x,infcord.temp.y,color.blue,-1,"%0.2f \n",inf.temperature)
 temprise = false
 else
 if inf.temperature == 2000 then
 guiWrite(infcord.temp.x,infcord.temp.y,-1,-1,"%0.2f \n",inf.temperature)
 end
 end
 guiWrite(infcord.generation.x,infcord.generation.y,-1,-1,"%s\n",numformat(inf.generationRate))
 infcord.flow.value = upgate.getFlow()
 guiWrite(infcord.flow.x,infcord.flow.y,-1,-1,"%s",numformat(infcord.flow.value))
 guiWrite(infcord.puregen.x,infcord.puregen.y,-1,-1,"%s\n",numformat(inf.generationRate - downgate.getFlow()))
 infcord.drain.value = inf.fieldDrainRate
 guiWrite(infcord.drain.x,infcord.drain.y,-1,-1,"%s\n",numformat(downgate.getFlow()))
 if inf.maxFieldStrength > 0 then
 guiWrite(infcord.fstrth.x,infcord.fstrth.y,-1,-1,"%d / %d (%0.2f %%) \n",inf.fieldStrength-inf.fieldDrainRate,inf.maxFieldStrength,((inf.fieldStrength-inf.fieldDrainRate)/inf.maxFieldStrength)*100)
 else
 guiWrite(infcord.fstrth.x,infcord.fstrth.y,-1,-1,"0 / 0 (0 %%) \n")
 end
 if inf.maxEnergySaturation > 0 then
 guiWrite(infcord.esturn.x,infcord.esturn.y,-1,-1,"%d / %d (%0.2f %%) \n",inf.energySaturation,inf.maxEnergySaturation,(inf.energySaturation/inf.maxEnergySaturation)*100)
 else
 guiWrite(infcord.esturn.x,infcord.esturn.y,-1,-1,"0 / 0 (0 %%) \n")
 end
 if inf.fuelConversion/inf.maxFuelConversion < 0.78 then
 guiWrite(infcord.fuel.x,infcord.fuel.y,-1,-1,"%d / %d (%0.2f %%) \n",inf.fuelConversion,inf.maxFuelConversion,(inf.fuelConversion/inf.maxFuelConversion)*100)
 else
 if inf.maxFuelConversion > 0 then
 if inf.status == "online" or inf.status == "charging" or inf.status == "charged" then
 guiWrite(infcord.fuel.x,infcord.fuel.y,color.red,-1,"%d / %d (%0.2f %%) Критический уровень топлива\n",inf.fuelConversion,inf.maxFuelConversion,(inf.fuelConversion/inf.maxFuelConversion)*100)
 else
 guiWrite(infcord.fuel.x,infcord.fuel.y,-1,-1,"%d / %d (%0.2f %%) Критический уровень топлива\n",inf.fuelConversion,inf.maxFuelConversion,(inf.fuelConversion/inf.maxFuelConversion)*100)
 end
 else
 guiWrite(infcord.fuel.x,infcord.fuel.y,-1,-1,"0 / 0 (0 %%)\n")
 end
 end
 guiWrite(infcord.fuelconv.x,infcord.fuelconv.y,-1,-1,"%d\n",inf.fuelConversionRate)
 com.proxy(com.get(flux.down.adr))
 if com.isAvailable("draconic_rf_storage") then
 guiWrite(infcord.core.x,infcord.core.y,-1,-1,coreformat())
 if button.stop.y ~= infcord.core.y + 2 then
 screenMain()
 end
 elseif button.stop.y ~= infcord.fuelconv.y + 2 then
 screenMain()
 end
 checkButtons()
 end
 end
 -- Алгоритм автономного режима
 local waittemp
 local function auto(state)
 
 if state then
 local inf = reactor.getReactorInfo()
 downflow = inf.fieldDrainRate / (1 - (cfg.shield/100))
 downgate.setOverrideEnabled(true)
 downgate.setFlowOverride(downflow)
 
 if inf.temperature < cfg.forceModeTempLowEdge then
 if infcord.flow.value - inf.generationRate <= cfg.forceModeStepCase then
 upgate.setSignalLowFlow(infcord.flow.value + cfg.forceModeStep)
 guiWrite(infcord.flow.x,infcord.flow.y,color.red,color.grey,"%s",numformat(infcord.flow.value))
 end
 elseif infcord.flow.value - inf.generationRate <= cfg.safeModeStepCase and inf.temperature >= cfg.forceModeTempLowEdge then
 if not waittemp and not waitfield then
 upgate.setSignalLowFlow(upgate.getSignalLowFlow() + cfg.safemodeStep)
 guiWrite(infcord.flow.x,infcord.flow.y,color.red,color.grey,"%s",numformat(infcord.flow.value))
 elseif inf.temperature < cfg.safeModeTempToWaitEdge then
 waittemp = false
 end
 
 elseif temprise and inf.temperature >= cfg.safeModeTempWaitEdge then
 if inf.temperature > cfg.safeModeTempWaitEdge then
 waittemp = true
 end
 if inf.temperature > cfg.tempCriticalEdge then
 upgate.setSignalLowFlow(inf.generationRate - 1000)
 end
 end
 else
 if infcord.status.value == "charging" then
 downflow = 900000
 else
 downflow = infcord.drain.value / (1 - (cfg.shield/100))
 end
 downgate.setOverrideEnabled(false)
 downgate.setSignalHighFlow(downflow)
 downgate.setSignalLowFlow(downflow)
 end
 end
 -- Обработчик событий
 local function tcall(type,scrnAdr,x,y,btn,player)
 local rx,ry = gpu.getResolution()
 --выход
 if x >= rx-2 and x<=rx and y == 1 then
 event.ignore("touch",tcall)
 prog = false
 ops = false
 end
 -- Стартовый экран
 if handleStart then
 if x>=flux[1].x and x<= flux[1].x+#flux[1].adr-1 and y==flux[1].y and upchoose then
 flux.up.adr = flux[1].adr
 
 upchoose = false
 return
 end
 if x>=flux[2].x and x<= flux[2].x+#flux[2].adr-1 and y==flux[2].y and upchoose then
 flux.up.adr= flux[2].adr
 upchoose = false
 return
 end
 
 if x>=flux[1].x and x<= flux[1].x+#flux[1].adr-1 and y==flux[1].y and downchoose then
 flux.down.adr = flux[1].adr
 downchoose = false
 return
 end
 if x>=flux[2].x and x<= flux[2].x+#flux[2].adr-1 and y==flux[2].y and downchoose then
 flux.down.adr= flux[2].adr
 downchoose = false
 return
 end
 if x >= button.continue.x+8 and x <= button.continue.x+7+#button.continue.name/2 and y == button.continue.y+1 and flux.up.adr ~= nil and flux.down.adr ~= nil then
 conf = true
 buts = true
 screenMain()
 return
 end
 if x >= button.change.x+2 and x <= button.change.x+1+#button.change.name/2-1 and y == button.change.y and flux.up.adr ~= nil and flux.down.adr ~= nil then
 conf = false
 buts = true
 com.proxy(com.get(flux.down.adr)).setOverrideEnabled(false)
 flux.up.adr=nil
 flux.down.adr=nil
 upchoose = true
 downchoose = true
 guiClear(16)
 return
 end
 end
 -- Главный экран
 if handleMain then
 -- Увеличение
 if x >= button.add.x+4 and x <= button.add.x+3+#button.add.name and y == button.add.y then
 if keyb.isShiftDown() then
 if keyb.isControlDown() then
 upgate.setSignalLowFlow(add(infcord.flow,cfg.ctrlShift_interval))
 else
 upgate.setSignalLowFlow(add(infcord.flow,cfg.shift_interval))
 end
 else
 if keyb.isControlDown() then
 upgate.setSignalLowFlow(add(infcord.flow,cfg.ctrl_interval))
 else
 upgate.setSignalLowFlow(add(infcord.flow,cfg.default_interval))
 end
 end
 guiWrite(infcord.flow.x,infcord.flow.y,color.red,color.grey,"%s",numformat(infcord.flow.value))
 end
 --Уменьшение
 if x >= button.sub.x+2 and x <= button.sub.x+1+#button.sub.name and y == button.sub.y then
 if keyb.isShiftDown() then
 if keyb.isControlDown() then
 upgate.setSignalLowFlow(sub(infcord.flow,cfg.ctrlShift_interval))
 else
 upgate.setSignalLowFlow(sub(infcord.flow,cfg.shift_interval))
 end
 else
 if keyb.isControlDown() then
 upgate.setSignalLowFlow(sub(infcord.flow,cfg.ctrl_interval))
 else
 upgate.setSignalLowFlow(sub(infcord.flow,cfg.default_interval))
 end
 end
 guiWrite(infcord.flow.x,infcord.flow.y,color.blue,color.grey,"%s",numformat(infcord.flow.value))
 end
 
 if not autostate then
 if x >= button.autooff.x and x <= button.autooff.x+#button.autooff.name/2-1 and y == button.autooff.y then
 gpu.set(button.autooff.x, button.autooff.y,"        ")
 autostate = true
 guiWrite(button.autoon.x,button.autoon.y,color.green,color.black,"%s\n",button.autoon.name)
 end
 else
 if x >= button.autoon.x and x <= button.autoon.x+#button.autoon.name/2-1 and y == button.autoon.y then
 gpu.set(button.autoon.x, button.autoon.y,"       ")
 autostate = false
 guiWrite(button.autooff.x,button.autooff.y,color.red,color.black,"%s\n",button.autooff.name)
 end
 end
 if button.charge.visible then
 if x >= button.charge.x and x <= button.charge.x+#button.charge.name/2 and y == button.charge.y then
 reactor.chargeReactor()
 guiWrite(button.charge.x,button.charge.y,-1,color.grey,"                 ",button.charge.name)
 button.charge.visible = false
 end
 end
 if button.start.visible then
 if x >= button.start.x and x <= button.start.x+#button.start.name/2-1 and y == button.start.y then
 reactor.activateReactor()
 guiWrite(button.start.x,button.start.y,-1,color.grey,"                 ",button.start.name)
 button.start.visible = false
 end
 end
 if button.stop.visible then
 if x >= button.stop.x and x <= button.stop.x+#button.stop.name/2-1 and y == button.stop.y then
 reactor.stopReactor()
 guiWrite(button.stop.x,button.stop.y,-1,color.grey,"                 ",button.stop.name)
 button.stop.visible = false
 end
 end
 --меню
 if x>= menuItem.options.x and x <= (menuItem.options.x + #menuItem.options.name/2-1) and y == menuItem.options.y then
 screenOptions()
 return
 end
 if x == 1 and y == 1 then
 event.ignore("touch",tcall)
 prog = false
 end
 end
 -- Экран настроек
 if handleOptions then
 -- Работа со значениями
 if canedit then
 if x >= OptionDefault.x and x <= OptionDefault.x + #tostring(OptionDefault.value)-1 and y == OptionDefault.y then
 canclose = false
 canedit = false
 editOption(OptionDefault)
 end
 if x >= OptionCtrl.x and x <= OptionCtrl.x + #tostring(OptionCtrl.value)-1 and y == OptionCtrl.y then
 canclose = false
 canedit = false
 editOption(OptionCtrl)
 end
 if x >= OptionShift.x and x <= OptionShift.x + #tostring(OptionShift.value)-1 and y == OptionShift.y then
 canclose = false
 canedit = false
 editOption(OptionShift)
 end
 if x >= OptionCtrlShift.x and x <= OptionCtrlShift.x + #tostring(OptionCtrlShift.value)-1 and y == OptionCtrlShift.y then
 canclose = false
 canedit = false
 editOption(OptionCtrlShift)
 end
 if x >= OptionShield.x and x <= OptionShield.x + #tostring(OptionShield.value)-1 and y == OptionShield.y then
 canclose = false
 canedit = false
 editOption(OptionShield)
 end
 end
 -- меню
 if canclose then
 if x>= menuItem.save.x and x <= (menuItem.save.x + #menuItem.save.name/2-1) and y == menuItem.save.y then
 cfg.default_interval = OptionDefault.value
 cfg.ctrl_interval = OptionCtrl.value
 cfg.shift_interval = OptionShift.value
 cfg.ctrlShift_interval = OptionCtrlShift.value
 cfg.shield = OptionShield.value
 configWrite(cfgName)
 screenMain()
 end
 if x>= menuItem.cancel.x and x <= (menuItem.cancel.x + #menuItem.cancel.name/2-1) and y == menuItem.cancel.y then
 OptionDefault.value = cfg.default_interval
 OptionCtrl.value = cfg.ctrl_interval
 OptionShift.value = cfg.shift_interval
 OptionCtrlShift.value = cfg.ctrlShift_interval
 OptionShield.value = cfg.ctrlShift_interval
 screenMain()
 return
 end
 end
 end
 end
 
 event.listen("touch",tcall)
 fileCreate(fileName)
 flux.up.adr,flux.down.adr = fileRead(fileName)
 screenStart()
 if upgate ~= nil and downgate ~= nil then
 screen.main()
 end
 while prog do
 if not pcall(refreshInfo) then
 autostate = false
 if not pcall (screenStart) then
 break
 end
 if not pcall(screenMain) then
 screenStart()
 if not pcall(screenMain) then
 break
 end
 end
 end
 auto(autostate)
 os.sleep(0)
 end
 gpu.setBackground(rback)
 gpu.setForeground(rfore)
 gpu.setResolution(xz,yz)
 term.clear()