Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- #!/bin/bash
- aptitude install hostapd udhcpd -y
- cat << EOF >/etc/udhcpd.conf
- start 192.168.42.2 # This is the range of IPs that the hostspot will give to client devices.
- end 192.168.42.20
- interface wlan0 # The device uDHCP listens on.
- remaining yes
- opt dns 8.8.8.8 8.8.4.4 # The DNS servers client devices will use.
- opt subnet 255.255.255.0
- opt router 192.168.42.1 # The Pi's IP address on wlan0 which we will set up shortly.
- opt lease 864000 # 10 day DHCP lease time in seconds
- EOF
- echo 'DHCPD_OPTS="-S"' > /etc/default/udhcpd
- ifconfig wlan0 192.168.42.1
- cat << EOF >/etc/hostapd/hostapd.conf
- interface=wlan0
- ssid=FreeWifi
- hw_mode=g
- channel=6
- auth_algs=1
- wmm_enabled=0
- EOF
- cat << EOF >/etc/network/interfaces
- auto lo
- iface lo inet loopback
- iface eth0 inet dhcp
- #allow-hotplug wlan0
- #wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
- #iface default inet dhcp
- iface wlan0 inet static
- address 192.168.42.1
- netmask 255.255.255.0
- up iptables-restore < /etc/iptables.ipv4.nat
- EOF
- echo 'DAEMON_CONF="/etc/hostapd/hostapd.conf"' > /etc/default/hostapd
- sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
- echo 'net.ipv4.ip_forward=1' > /etc/sysctl.conf
- iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
- iptables -A FORWARD -i eth0 -o wlan0 -m state --state RELATED,ESTABLISHED -j ACCEPT
- iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT
- sh -c "iptables-save > /etc/iptables.ipv4.nat"
- service hostapd start
- service udhcpd start
- update-rc.d hostapd enable
- update-rc.d udhcpd enable
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement