API tools faq
paste
Advertisement
RobertBerger

Linux-3.14.1-armv7-x5-beagle-xm

RobertBerger
Apr 27th, 2014
210
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.40 KB | None | 0 0
raw download clone embed print report
  1. bootfile: beagle-xm/uImage [328/4579]
  2. fdtfile: beagle-xm/uImage-omap3-beagle-xm.dtb
  3. (Re)start USB...
  4. USB0: ULPI: ulpi_reset: failed writing reset bit
  5. ULPI: ulpi_reset: failed writing reset bit
  6. USB EHCI 1.00
  7. scanning bus 0 for devices... 3 USB Device(s) found
  8. scanning usb for storage devices... 0 Storage Device(s) found
  9. scanning usb for ethernet devices... 1 Ethernet Device(s) found
  10. ERROR: Need valid 'usbnet_devaddr' to be set
  11. at ether.c:2369/usb_eth_init()
  12. Waiting for Ethernet connection... done.
  13. Using sms0 device
  14. host 192.168.2.33 is alive
  15. Waiting for Ethernet connection... done.
  16. Using sms0 device
  17. TFTP from server 192.168.2.33; our IP address is 192.168.2.53
  18. Filename 'beagle-xm/uImage'.
  19. Load address: 0x80300000
  20. Loading: #################################################################
  21. #################################################################
  22. #################################################################
  23. #################################################################
  24. ##################
  25. 1.2 MiB/s
  26. done
  27. Bytes transferred = 4073312 (3e2760 hex)
  28. Waiting for Ethernet connection... done.
  29. Using sms0 device
  30. TFTP from server 192.168.2.33; our IP address is 192.168.2.53
  31. Filename 'beagle-xm/uImage-omap3-beagle-xm.dtb'.
  32. Load address: 0x815f0000
  33. Loading: #####
  34. 1.1 MiB/s
  35. done
  36. Bytes transferred = 60664 (ecf8 hex)
  37. bootm: 0x80300000 - 0x815f0000
  38. Booting from nfs...
  39. bootargs=console=ttyO2,115200n8 ip=192.168.2.53:192.168.2.33:192.168.2.1:255.255.255.0:beagle-xm:eth0:off nfsroot=192.168.2.33:/opt/eldk-5.5/armv7a/rootfs-sato-sdk noinitrd nohlt panic=1
  40. ## Booting kernel from Legacy Image at 80300000 ...
  41. Image Name: Linux-3.14.1-armv7-x5
  42. Image Type: ARM Linux Kernel Image (uncompressed)
  43. Data Size: 4073248 Bytes = 3.9 MiB
  44. Load Address: 80008000
  45. Entry Point: 80008000
  46. Verifying Checksum ... OK
  47. ## Flattened Device Tree blob at 815f0000
  48. Booting using the fdt blob at 0x815f0000
  49. Loading Kernel Image ... OK
  50. Loading Device Tree to 8ffee000, end 8ffffcf7 ... OK
  51.  
  52. Starting kernel ...
  53.  
  54. [ 0.000000] Booting Linux on physical CPU 0x0
  55. [ 0.000000] Initializing cgroup subsys cpuset
  56. [ 0.000000] Initializing cgroup subsys cpu
  57. [ 0.000000] Initializing cgroup subsys cpuacct
  58. [ 0.000000] Linux version 3.14.1-armv7-x5 (student@ubuntu-srvr-lv-1) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.03 - Linaro GCC 2014.03) ) #1 SMP Sun Apr 27 12:58:01 EEST 2014
  59. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  60. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  61. [ 0.000000] Machine model: TI OMAP3 BeagleBoard xM
  62. [ 0.000000] Memory policy: Data cache writeback
  63. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  64. [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  65. [ 0.000000] PERCPU: Embedded 9 pages/cpu @dfad0000 s14336 r8192 d14336 u36864
  66. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  67. [ 0.000000] Kernel command line: console=ttyO2,115200n8 ip=192.168.2.53:192.168.2.33:192.168.2.1:255.255.255.0:beagle-xm:eth0:off nfsroot=192.168.2.33:/opt/eldk-5.5/armv7a/rootfs-sato-sdk noinitrd nohlt panic=1
  68. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  69. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  70. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [259/4579]
  71. [ 0.000000] allocated 1048576 bytes of page_cgroup
  72. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  73. [ 0.000000] Memory: 504368K/523264K available (7830K kernel code, 639K rwdata, 3116K rodata, 510K init, 1019K bss, 18896K reserved, 0K highmem)
  74. [ 0.000000] Virtual kernel memory layout:
  75. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  76. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  77. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  78. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  79. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  80. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  81. [ 0.000000] .text : 0xc0008000 - 0xc0ab8c98 (10948 kB)
  82. [ 0.000000] .init : 0xc0ab9000 - 0xc0b38800 ( 510 kB)
  83. [ 0.000000] .data : 0xc0b3a000 - 0xc0bd9df8 ( 640 kB)
  84. [ 0.000000] .bss : 0xc0bd9df8 - 0xc0cd8b90 (1020 kB)
  85. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  86. [ 0.000000] Hierarchical RCU implementation.
  87. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  88. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  89. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  90. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  91. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  92. [ 0.000000] Total of 96 interrupts on 1 active controller
  93. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
  94. [ 0.000000] clock: dpll5: dpll5_clk omap3630
  95. [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
  96. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
  97. [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
  98. [ 0.000274] Console: colour dummy device 80x30
  99. [ 0.000305] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
  100. [ 0.119110] pid_max: default: 32768 minimum: 301
  101. [ 0.119293] Security Framework initialized
  102. [ 0.119323] Yama: becoming mindful.
  103. [ 0.119598] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  104. [ 0.119598] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  105. [ 0.143402] Initializing cgroup subsys memory
  106. [ 0.143463] Initializing cgroup subsys devices
  107. [ 0.143493] Initializing cgroup subsys freezer
  108. [ 0.143493] Initializing cgroup subsys net_cls
  109. [ 0.143493] Initializing cgroup subsys blkio
  110. [ 0.143524] Initializing cgroup subsys perf_event
  111. [ 0.143646] CPU: Testing write buffer coherency: ok
  112. [ 0.144104] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  113. [ 0.144165] Setting up static identity map for 0x8076a588 - 0x8076a5e0
  114. [ 0.145690] Brought up 1 CPUs
  115. [ 0.145721] SMP: Total of 1 processors activated.
  116. [ 0.145721] CPU: All CPU(s) started in SVC mode.
  117. [ 0.146453] devtmpfs: initialized
  118. [ 0.151031] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  119. [ 0.169952] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
  120. [ 0.170532] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
  121. [ 0.177520] omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
  122. [ 0.178100] omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
  123. [ 0.243499] xor: measuring software checksum speed
  124. [ 0.338623] arm4regs : 746.400 MB/sec
  125. [ 0.438415] 8regs : 550.000 MB/sec
  126. [ 0.538208] 32regs : 643.600 MB/sec
  127. [ 0.638000] neon : 533.600 MB/sec
  128. [ 0.638031] xor: using function: arm4regs (746.400 MB/sec)
  129. [ 0.638031] pinctrl core: initialized pinctrl subsystem
  130. [ 0.638732] regulator-dummy: no parameters
  131. [ 0.639190] NET: Registered protocol family 16
  132. [ 0.639892] DMA: preallocated 256 KiB pool for atomic coherent allocations
  133. [ 0.640960] cpuidle: using governor ladder
  134. [ 0.640991] cpuidle: using governor menu
  135. [ 0.649871] Reprogramming SDRC clock to 400000000 Hz
  136. [ 0.653472] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@48002a00/pinmux_gpio1_pins, deferring probe
  137. [ 0.653503] platform 48310000.gpio: Driver omap_gpio requests probe deferral
  138. [ 0.654663] OMAP GPIO hardware version 2.5
  139. [ 0.664916] platform 49022000.mcbsp: alias fck already exists [190/4579]
  140. [ 0.665466] platform 49024000.mcbsp: alias fck already exists
  141. [ 0.671936] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
  142. [ 0.677459] No ATAGs?
  143. [ 0.677490] hw-breakpoint: debug architecture 0x4 unsupported.
  144. [ 0.679229] OMAP DMA hardware revision 5.0
  145. [ 0.698394] bio: create slab <bio-0> at 0
  146. [ 0.868103] raid6: int32x1 94 MB/s
  147. [ 1.037200] raid6: int32x2 129 MB/s
  148. [ 1.206909] raid6: int32x4 102 MB/s
  149. [ 1.376708] raid6: int32x8 104 MB/s
  150. [ 1.546203] raid6: neonx1 555 MB/s
  151. [ 1.715759] raid6: neonx2 805 MB/s
  152. [ 1.885467] raid6: neonx4 298 MB/s
  153. [ 2.055145] raid6: neonx8 158 MB/s
  154. [ 2.055175] raid6: using algorithm neonx2 (805 MB/s)
  155. [ 2.055175] raid6: using intx1 recovery algorithm
  156. [ 2.056854] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
  157. [ 2.056915] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
  158. [ 2.079284] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
  159. [ 2.080108] platform hsusb2_power_reg.7: Driver reg-fixed-voltage requests probe deferral
  160. [ 2.084533] SCSI subsystem initialized
  161. [ 2.085662] usbcore: registered new interface driver usbfs
  162. [ 2.085784] usbcore: registered new interface driver hub
  163. [ 2.086029] usbcore: registered new device driver usb
  164. [ 2.086517] platform hsusb2_phy.8: Driver usb_phy_gen_xceiv requests probe deferral
  165. [ 2.090362] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
  166. [ 2.091033] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
  167. [ 2.091583] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
  168. [ 2.091918] media: Linux media interface: v0.10
  169. [ 2.092010] Linux video capture interface: v2.00
  170. [ 2.092163] pps_core: LinuxPPS API ver. 1 registered
  171. [ 2.092193] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  172. [ 2.092224] PTP clock support registered
  173. [ 2.092315] EDAC MC: Ver: 3.0.0
  174. [ 2.093353] omap-iommu omap-iommu.0: mmu_isp registered
  175. [ 2.093872] Advanced Linux Sound Architecture Driver Initialized.
  176. [ 2.094818] NetLabel: Initializing
  177. [ 2.094818] NetLabel: domain hash size = 128
  178. [ 2.094848] NetLabel: protocols = UNLABELED CIPSOv4
  179. [ 2.094909] NetLabel: unlabeled traffic allowed by default
  180. [ 2.095336] Switched to clocksource 32k_counter
  181. [ 2.166992] NET: Registered protocol family 2
  182. [ 2.167968] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  183. [ 2.168029] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  184. [ 2.168151] TCP: Hash tables configured (established 4096 bind 4096)
  185. [ 2.168212] TCP: reno registered
  186. [ 2.168243] UDP hash table entries: 256 (order: 1, 8192 bytes)
  187. [ 2.168273] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  188. [ 2.168670] NET: Registered protocol family 1
  189. [ 2.169219] RPC: Registered named UNIX socket transport module.
  190. [ 2.169219] RPC: Registered udp transport module.
  191. [ 2.169250] RPC: Registered tcp transport module.
  192. [ 2.169250] RPC: Registered tcp NFSv4.1 backchannel transport module.
  193. [ 2.171630] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  194. [ 2.175201] futex hash table entries: 256 (order: 2, 16384 bytes)
  195. [ 2.175598] audit: initializing netlink subsys (disabled)
  196. [ 2.175659] audit: type=2000 audit(2.180:1): initialized
  197. [ 2.527221] VFS: Disk quotas dquot_6.5.2
  198. [ 2.527679] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  199. [ 2.531249] NFS: Registering the id_resolver key type
  200. [ 2.531341] Key type id_resolver registered
  201. [ 2.531341] Key type id_legacy registered
  202. [ 2.531402] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  203. [ 2.531768] fuse init (API version 7.22)
  204. [ 2.532470] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  205. [ 2.535522] msgmni has been set to 985
  206. [ 2.537231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  207. [ 2.537384] io scheduler noop registered
  208. [ 2.537384] io scheduler deadline registered [121/4579]
  209. [ 2.537475] io scheduler cfq registered (default)
  210. [ 2.539978] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
  211. [ 2.540313] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
  212. [ 2.541015] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
  213. [ 2.543884] OMAP DSS rev 2.0
  214. [ 2.548248] Division by zero in kernel.
  215. [ 2.548278] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.1-armv7-x5 #1
  216. [ 2.548339] [<c001442c>] (unwind_backtrace) from [<c0011164>] (show_stack+0x10/0x14)
  217. [ 2.548370] [<c0011164>] (show_stack) from [<c0760d40>] (dump_stack+0x70/0x8c)
  218. [ 2.548400] [<c0760d40>] (dump_stack) from [<c03bf1dc>] (Ldiv0+0x8/0x10)
  219. [ 2.548431] [<c03bf1dc>] (Ldiv0) from [<c0432a14>] (ti_abb_probe+0x5fc/0x7e8)
  220. [ 2.548461] [<c0432a14>] (ti_abb_probe) from [<c0497098>] (platform_drv_probe+0x18/0x48)
  221. [ 2.548492] [<c0497098>] (platform_drv_probe) from [<c0495ac4>] (driver_probe_device+0xb0/0x1f8)
  222. [ 2.548492] [<c0495ac4>] (driver_probe_device) from [<c0495cb8>] (__driver_attach+0x68/0x8c)
  223. [ 2.548522] [<c0495cb8>] (__driver_attach) from [<c049436c>] (bus_for_each_dev+0x70/0x84)
  224. [ 2.548553] [<c049436c>] (bus_for_each_dev) from [<c049530c>] (bus_add_driver+0xdc/0x1cc)
  225. [ 2.548583] [<c049530c>] (bus_add_driver) from [<c04962bc>] (driver_register+0x9c/0xe0)
  226. [ 2.548583] [<c04962bc>] (driver_register) from [<c000893c>] (do_one_initcall+0x9c/0x150)
  227. [ 2.548614] [<c000893c>] (do_one_initcall) from [<c0ab9d14>] (kernel_init_freeable+0x1ac/0x274)
  228. [ 2.548645] [<c0ab9d14>] (kernel_init_freeable) from [<c075afbc>] (kernel_init+0x8/0xe4)
  229. [ 2.548675] [<c075afbc>] (kernel_init) from [<c000da98>] (ret_from_fork+0x14/0x3c)
  230. [ 2.548950] abb_mpu_iva: 1012 <--> 1380 mV
  231. [ 2.660919] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  232. [ 2.663574] Serial: IMX driver
  233. [ 2.664764] omap_uart 4806a000.serial: no wakeirq for uart0
  234. [ 2.665191] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
  235. [ 2.665985] omap_uart 4806c000.serial: no wakeirq for uart0
  236. [ 2.666351] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
  237. [ 2.667053] omap_uart 49020000.serial: no wakeirq for uart0
  238. [ 2.667419] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
  239. [ 3.791198] console [ttyO2] enabled
  240. [ 3.795867] omap_uart 49042000.serial: no wakeirq for uart0
  241. [ 3.802093] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
  242. [ 3.812438] serial: Freescale lpuart driver
  243. [ 3.818206] [drm] Initialized drm 1.1.0 20060810
  244. [ 3.823181] usbcore: registered new interface driver udl
  245. [ 3.835815] twl 0-0048: PIH (irq 23) chaining IRQs 306..314
  246. [ 3.841796] twl 0-0048: power (irq 311) chaining IRQs 314..321
  247. [ 3.851104] VAUX1: at 3000 mV
  248. [ 3.856750] usb_1v8: 1800 mV
  249. [ 3.861175] VAUX3: at 2800 mV
  250. [ 3.865783] VAUX4: at 2800 mV
  251. [ 3.870300] VDD1: 600 <--> 1450 mV at 1387 mV
  252. [ 3.876434] VDAC: 1800 mV
  253. [ 3.882324] VIO: at 1800 mV
  254. [ 3.887176] VINTANA1: 1500 mV
  255. [ 3.892211] VINTANA2: at 2750 mV
  256. [ 3.897644] VINTDIG: 1500 mV
  257. [ 3.901824] VMMC1: 1850 <--> 3150 mV at 3150 mV
  258. [ 3.908081] VMMC2: 1850 <--> 3150 mV at 2600 mV
  259. [ 3.914062] VUSB1V5: 1500 mV
  260. [ 3.917999] VUSB1V8: 1800 mV
  261. [ 3.921905] VUSB3V1: 3100 mV
  262. [ 3.926788] VPLL1: at 1800 mV
  263. [ 3.931457] VPLL2: 1800 mV
  264. [ 3.935760] VSIM: 1800 <--> 3000 mV at 1800 mV
  265. [ 3.941619] twl4030_gpio twl4030-gpio: gpio (irq 306) chaining IRQs 322..339
  266. [ 3.952392] twl4030_usb twl4030-usb.34: Initialized TWL4030 USB module
  267. [ 3.974731] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  268. [ 3.981689] ehci-omap: OMAP-EHCI Host Controller driver
  269. [ 3.987609] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517
  270. [ 3.994842] platform 48064800.ehci: Driver ehci-omap requests probe deferral
  271. [ 4.002563] usbcore: registered new interface driver usb-storage
  272. [ 4.010467] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
  273. [ 4.016998] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
  274. [ 4.025726] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  275. [ 4.032836] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  276. [ 4.040496] usb usb1: Product: MUSB HDRC host driver
  277. [ 4.045715] usb usb1: Manufacturer: Linux 3.14.1-armv7-x5 musb-hcd [52/4579]
  278. [ 4.052215] usb usb1: SerialNumber: musb-hdrc.0.auto
  279. [ 4.058593] hub 1-0:1.0: USB hub found
  280. [ 4.062591] hub 1-0:1.0: 1 port detected
  281. [ 4.069366] using random self ethernet address
  282. [ 4.074035] using random host ethernet address
  283. [ 4.079650] usb0: HOST MAC 1a:fc:bf:97:27:e2
  284. [ 4.084167] usb0: MAC ae:69:74:11:ab:c9
  285. [ 4.088287] using random self ethernet address
  286. [ 4.092956] using random host ethernet address
  287. [ 4.097717] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  288. [ 4.104644] g_ether gadget: g_ether ready
  289. [ 4.109558] mousedev: PS/2 mouse device common for all mice
  290. [ 4.117004] input: twl4030_pwrbutton as /devices/68000000.ocp/48070000.i2c/i2c-0/0-0048/pwrbutton.37/input/input0
  291. [ 4.129180] i2c /dev entries driver
  292. [ 4.135955] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  293. [ 4.145111] sdhci: Secure Digital Host Controller Interface driver
  294. [ 4.151641] sdhci: Copyright(c) Pierre Ossman
  295. [ 4.158325] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
  296. [ 4.205993] sdhci-pltfm: SDHCI platform and OF driver helper
  297. [ 4.213531] ledtrig-cpu: registered to indicate activity on CPUs
  298. [ 4.220031] hidraw: raw HID events driver (C) Jiri Kosina
  299. [ 4.227050] usbcore: registered new interface driver usbhid
  300. [ 4.232910] usbhid: USB HID core driver
  301. [ 4.238006] ashmem: initialized
  302. [ 4.245880] oprofile: using arm/armv7
  303. [ 4.250091] TCP: cubic registered
  304. [ 4.254547] NET: Registered protocol family 10
  305. [ 4.261901] mip6: Mobile IPv6
  306. [ 4.265014] NET: Registered protocol family 17
  307. [ 4.269897] Key type dns_resolver registered
  308. [ 4.274383] mpls_gso: MPLS GSO support
  309. [ 4.284515] ThumbEE CPU extension supported.
  310. [ 4.289093] Registering SWP/SWPB emulation handler
  311. [ 4.294128] SmartReflex Class3 initialized
  312. [ 4.299163] registered taskstats version 1
  313. [ 4.304321] bio: create slab <bio-1> at 1
  314. [ 4.309600] Btrfs loaded
  315. [ 4.312530] VPLL2: disabling
  316. [ 4.319305] VDAC: disabling
  317. [ 4.322631] VAUX3: disabling
  318. [ 4.325958] regulator-dummy: disabling
  319. [ 4.330444] 48050000.dss supply vdds_dsi not found, using dummy regulator
  320. [ 4.338500] omapdrm omapdrm.0: DMM not available, disable DMM support
  321. [ 4.346099] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  322. [ 4.353027] [drm] No driver support for vblank timestamp query.
  323. [ 4.359527] omapdrm omapdrm.0: No connectors reported connected with modes
  324. [ 4.366821] [drm] Cannot find any crtc or sizes - going 1024x768
  325. [ 4.388549] Console: switching to colour frame buffer device 128x48
  326. [ 4.404937] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
  327. [ 4.411163] omapdrm omapdrm.0: registered panic notifier
  328. [ 4.416778] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
  329. [ 4.423095] Error: Driver 'tfp410' is already registered, aborting...
  330. [ 4.433135] hsusb2_vbus: 3300 mV
  331. [ 4.442718] mmc0: host does not support reading read-only switch. assuming write-enable.
  332. [ 4.453338] mmc0: new high speed SDHC card at address 0002
  333. [ 4.459686] mmcblk0: mmc0:0002 00000 7.41 GiB
  334. [ 4.466247] mmcblk0: p1 p2
  335. [ 4.535522] ehci-omap 48064800.ehci: EHCI Host Controller
  336. [ 4.541473] ehci-omap 48064800.ehci: new USB bus registered, assigned bus number 2
  337. [ 4.549530] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800
  338. [ 4.575469] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00
  339. [ 4.581878] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  340. [ 4.589050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  341. [ 4.596618] usb usb2: Product: EHCI Host Controller
  342. [ 4.601715] usb usb2: Manufacturer: Linux 3.14.1-armv7-x5 ehci_hcd
  343. [ 4.608215] usb usb2: SerialNumber: 48064800.ehci
  344. [ 4.613861] hub 2-0:1.0: USB hub found
  345. [ 4.617858] hub 2-0:1.0: 3 ports detected
  346. [ 4.623138] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  347. [ 4.629760] sr_init: No PMIC hook to init smartreflex
  348. [ 4.635192] sr_init: platform driver register failed for SR
  349. [ 4.650695] ALSA device list:
  350. [ 4.653839] No soundcards found.
  351. [ 4.658386] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
  352. [ 4.666259] Please append a correct "root=" boot option; here are the available partitions:
  353. [ 4.675018] b300 7778304 mmcblk0 driver: mmcblk
  354. [ 4.680603] b301 49152 mmcblk0p1 00000000-01
  355. [ 4.686187] b302 7728128 mmcblk0p2 00000000-02
  356. [ 4.691772] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  357. [ 4.700408] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.1-armv7-x5 #1
  358. [ 4.707458] [<c001442c>] (unwind_backtrace) from [<c0011164>] (show_stack+0x10/0x14)
  359. [ 4.715576] [<c0011164>] (show_stack) from [<c0760d40>] (dump_stack+0x70/0x8c)
  360. [ 4.723144] [<c0760d40>] (dump_stack) from [<c075c3c8>] (panic+0x84/0x1d4)
  361. [ 4.730346] [<c075c3c8>] (panic) from [<c0aba144>] (mount_block_root+0x260/0x2a8)
  362. [ 4.738189] [<c0aba144>] (mount_block_root) from [<c0aba314>] (prepare_namespace+0x124/0x184)
  363. [ 4.747131] [<c0aba314>] (prepare_namespace) from [<c0ab9d90>] (kernel_init_freeable+0x228/0x274)
  364. [ 4.756408] [<c0ab9d90>] (kernel_init_freeable) from [<c075afbc>] (kernel_init+0x8/0xe4)
  365. [ 4.764892] [<c075afbc>] (kernel_init) from [<c000da98>] (ret_from_fork+0x14/0x3c)
  366. [ 4.772796] drm_kms_helper: panic occurred, switching back to text console
  367. [ 4.779998] Rebooting in 1 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!