Button Setup rev_01

/********* Pleasedontcode.com **********

    Pleasedontcode thanks you for automatic code generation! Enjoy your code!

    - Terms and Conditions:
    You have a non-exclusive, revocable, worldwide, royalty-free license
    for personal and commercial use. Attribution is optional; modifications
    are allowed, but you're responsible for code maintenance. We're not
    liable for any loss or damage. For full terms,
    please visit pleasedontcode.com/termsandconditions.

    - Project: Button Setup
    - Source Code compiled for: Arduino Nano
    - Source Code created on: 2023-12-26 10:07:05

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
    /* 3. GSM Module:     - The task of the GSM module is */
    /* to enable communication over the cellular network. */
    /* - The GSM module allows the Arduino Nano to send */
    /* and receive SMS messages, make phone calls, or */
    /* access data services over the cellular network. */
/****** SYSTEM REQUIREMENT 2 *****/
    /* 3. GSM Module:     - The task of the GSM module is */
    /* to enable communication over the cellular network. */
    /* - The GSM module allows the Arduino Nano to send */
    /* and receive SMS messages, make phone calls, or */
    /* access data services over the cellular network. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Arduino.h>
#include <EasyButton.h>

const uint8_t GSMmodule_PushButton_PIN_D2 = 2;
const uint8_t GPSmodule_PushButton_PIN_D3 = 3;
const uint8_t lithiumionbattery_PushButton_PIN_D4 = 4;
const uint8_t Minicamera_PushButton_PIN_D5 = 5;
const uint8_t Minisolarcell_PushButton_PIN_D6 = 6;

EasyButton GSMmodule_PushButton(GSMmodule_PushButton_PIN_D2);
EasyButton GPSmodule_PushButton(GPSmodule_PushButton_PIN_D3);
EasyButton lithiumionbattery_PushButton(lithiumionbattery_PushButton_PIN_D4);
EasyButton Minicamera_PushButton(Minicamera_PushButton_PIN_D5);
EasyButton Minisolarcell_PushButton(Minisolarcell_PushButton_PIN_D6);

void setup()
{
  pinMode(GSMmodule_PushButton_PIN_D2, INPUT_PULLUP);
  pinMode(GPSmodule_PushButton_PIN_D3, INPUT_PULLUP);
  pinMode(lithiumionbattery_PushButton_PIN_D4, INPUT_PULLUP);
  pinMode(Minicamera_PushButton_PIN_D5, INPUT_PULLUP);
  pinMode(Minisolarcell_PushButton_PIN_D6, INPUT_PULLUP);

  GSMmodule_PushButton.begin();
  GPSmodule_PushButton.begin();
  lithiumionbattery_PushButton.begin();
  Minicamera_PushButton.begin();
  Minisolarcell_PushButton.begin();
}

void loop()
{
  GSMmodule_PushButton.read();
  GPSmodule_PushButton.read();
  lithiumionbattery_PushButton.read();
  Minicamera_PushButton.read();
  Minisolarcell_PushButton.read();

  if (GSMmodule_PushButton.isPressed())
  {
    // Code to send SMS, make phone calls, or access data services using the GSM module
  }

  if (GPSmodule_PushButton.isPressed())
  {
    // Code to access GPS data using the GPS module
  }

  if (lithiumionbattery_PushButton.isPressed())
  {
    // Code to check battery status or perform battery-related operations
  }

  if (Minicamera_PushButton.isPressed())
  {
    // Code to take photos or control the mini camera
  }

  if (Minisolarcell_PushButton.isPressed())
  {
    // Code to monitor solar cell output or perform solar cell-related operations
  }
}