EasyButton Control rev_01

/********* Pleasedontcode.com **********

    Pleasedontcode thanks you for automatic code generation! Enjoy your code!

    - Terms and Conditions:
    You have a non-exclusive, revocable, worldwide, royalty-free license
    for personal and commercial use. Attribution is optional; modifications
    are allowed, but you're responsible for code maintenance. We're not
    liable for any loss or damage. For full terms,
    please visit pleasedontcode.com/termsandconditions.

    - Project: EasyButton Control
    - Source Code NOT compiled for: ESP32 DevKit V1
    - Source Code created on: 2024-05-09 06:47:24

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
    /* button1 push open the gate, button 2 push close */
    /* the gate, button 3 sensor close the gate, and */
    /* relay to automatic open when button 1 pressed */
    /* button 3 will check and close the gate, when relay */
    /* is trigger button 3 will check and close the gate. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Arduino.h>
#include <EasyButton.h>

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t button1_PIN = 1;  // Button 1 pin
const uint8_t button2_PIN = 2;  // Button 2 pin
const uint8_t button3_PIN = 3;  // Button 3 pin

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
EasyButton button1(button1_PIN);
EasyButton button2(button2_PIN);
EasyButton button3(button3_PIN);

void setup(void)
{
    // Initialize button pins
    pinMode(button1_PIN, INPUT_PULLUP);
    pinMode(button2_PIN, INPUT_PULLUP);
    pinMode(button3_PIN, INPUT_PULLUP);

    // Additional setup for gate control
    // Define gate control logic here
}

void loop(void)
{
    // Main code for gate control
    // Implement gate control logic based on button presses
    // Use button.read() to read the button state

    // Example logic:
    if (button1.read()) {
        // Open the gate
        // Implement gate opening logic
    }

    if (button2.read()) {
        // Close the gate
        // Implement gate closing logic
    }

    if (button3.read()) {
        // Sensor to close the gate
        // Implement gate closing logic based on sensor
    }

    // Additional logic for automatic gate opening with relay trigger
    // Check if button 1 is pressed and trigger relay
    // Implement automatic gate opening logic

    // Check and close the gate based on button 3 press
    // Implement gate closing logic based on button 3 press

    // Check and close the gate when relay is triggered
    // Implement gate closing logic when relay is triggered
}

/* END CODE */