API tools faq
paste
Advertisement
tahc81

Untitled

tahc81
Jan 15th, 2024
77
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
YAML 58.58 KB | None | 0 0
raw download clone embed print report
  1. [18:11:48][I][logger:355]: Log initialized
  2. [18:11:48][C][ota:473]: There have been 1 suspected unsuccessful boot attempts.
  3. [18:11:48][D][esp32.preferences:114]: Saving 1 preferences to flash...
  4. [18:11:48][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
  5. [18:11:48][I][app:029]: Running through setup()...
  6. [18:11:48][I][i2c.arduino:183]: Performing I2C bus recovery
  7. [18:11:48][C][ina228:049]: Setting up INA228...
  8. [18:11:48][D][ina228:021]: read_u16_ 0x3E, ret= 0, raw 0x4954
  9. [18:11:48][D][ina228:021]: read_u16_ 0x3F, ret= 0, raw 0x8122
  10. [18:11:48][D][ina228:066]: Manufacturer: 0x5449, Device ID: 0x0228, Revision: 1
  11. [18:11:48][D][ina228:092]: New Rshunt=0.001000 ohm, max current=20.000
  12. [18:11:48][D][ina228:093]: New CURRENT_LSB=0.000019, SHUNT_CAL=250
  13. [18:11:48][D][ina228:186]: clear_energy_counter_
  14. [18:11:48][D][ina228:021]: read_u16_ 0x00, ret= 0, raw 0x0000
  15. [18:11:48][D][ina228:021]: read_u16_ 0x01, ret= 0, raw 0xD4FF
  16. [18:11:48][D][ina228:081]: Read REG_ADC_CONFIG returned TRUE, 0xFFD4
  17. [18:11:48][D][ina228:084]: Read REG_ADC_CONFIG2 returned TRUE, 0xFFD4
  18. [18:11:48][C][wifi:038]: Setting up WiFi...
  19. [18:11:48][C][wifi:051]: Starting WiFi...
  20. [18:11:48][C][wifi:052]:  Local MAC: 3C:E9:0E:8B:CC:CC
  21. [18:11:49][D][wifi:455]: Starting scan...
  22. [18:11:49][D][sensor:094]: 'Uptime Sensor': Sending state 0.25900 s with 0 decimals of accuracy
  23. [18:11:49][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00C00000
  24. [18:11:49][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  25. [18:11:49][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  26. [18:11:49][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  27. [18:11:49][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  28. [18:11:49][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  29. [18:11:49][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  30. [18:11:49][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  31. [18:11:49][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  32. [18:11:49][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  33. [18:11:49][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  34. [18:11:49][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  35. [18:11:49][D][ina228:161]: read_energy_1 ret= 0, 0xFFFFC00000
  36. [18:11:49][D][ina228:164]: read_energy_2 ret= 0, 0xC0FFFF
  37. [18:11:49][D][sensor:094]: 'INA228 Energy': Sending state 12351.99902 J with 2 decimals of accuracy
  38. [18:11:49][D][ina228:173]: read_charge_1 is TRUE, 0xFFFFC00000
  39. [18:11:49][D][ina228:178]: read_charge_2 is TRUE, 0xC0FFFF
  40. [18:11:49][D][sensor:094]: 'INA228 Charge': Sending state 241.24998 C with 2 decimals of accuracy
  41. [18:11:49][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  42. [18:11:49][W][component:215]: Components should block for at most 20-30ms.
  43. [18:11:50][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  44. [18:11:50][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  45. [18:11:50][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  46. [18:11:50][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  47. [18:11:50][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  48. [18:11:50][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  49. [18:11:50][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  50. [18:11:50][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  51. [18:11:50][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  52. [18:11:50][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  53. [18:11:50][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  54. [18:11:50][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  55. [18:11:50][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  56. [18:11:50][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  57. [18:11:50][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  58. [18:11:50][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  59. [18:11:50][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  60. [18:11:50][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  61. [18:11:50][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  62. [18:11:50][W][component:215]: Components should block for at most 20-30ms.
  63. [18:11:52][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  64. [18:11:52][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  65. [18:11:52][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  66. [18:11:52][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  67. [18:11:52][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  68. [18:11:52][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  69. [18:11:52][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  70. [18:11:52][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  71. [18:11:52][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  72. [18:11:52][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  73. [18:11:52][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  74. [18:11:52][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  75. [18:11:52][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  76. [18:11:52][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  77. [18:11:52][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  78. [18:11:52][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  79. [18:11:52][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  80. [18:11:52][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  81. [18:11:52][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  82. [18:11:52][W][component:215]: Components should block for at most 20-30ms.
  83. [18:11:54][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  84. [18:11:54][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  85. [18:11:54][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  86. [18:11:54][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  87. [18:11:54][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  88. [18:11:54][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  89. [18:11:54][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  90. [18:11:54][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  91. [18:11:54][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  92. [18:11:54][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  93. [18:11:54][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  94. [18:11:54][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  95. [18:11:54][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  96. [18:11:54][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  97. [18:11:54][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  98. [18:11:54][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  99. [18:11:54][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  100. [18:11:54][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  101. [18:11:54][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  102. [18:11:54][W][component:215]: Components should block for at most 20-30ms.
  103. [18:11:54][D][wifi:470]: Found networks:
  104. [18:11:54][I][wifi:514]: - 'tantal' (FC:34:97:0B:AB:80) ▂▄▆█
  105. [18:11:54][D][wifi:515]:    Channel: 1
  106. [18:11:54][D][wifi:516]:    RSSI: -71 dB
  107. [18:11:54][I][wifi:514]: - 'ap-garaz' (14:DD:A9:CE:86:C0) ▂▄▆█
  108. [18:11:54][D][wifi:515]:    Channel: 12
  109. [18:11:54][D][wifi:516]:    RSSI: -84 dB
  110. [18:11:54][D][wifi:519]: - 'o2b_guest' (FC:34:97:0B:AB:81) ▂▄▆█
  111. [18:11:54][I][wifi:300]: WiFi Connecting to 'tantal'...
  112. [18:11:56][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  113. [18:11:56][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  114. [18:11:56][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  115. [18:11:56][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  116. [18:11:56][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  117. [18:11:56][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  118. [18:11:56][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  119. [18:11:56][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  120. [18:11:56][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  121. [18:11:56][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  122. [18:11:56][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  123. [18:11:56][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  124. [18:11:56][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  125. [18:11:56][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  126. [18:11:56][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  127. [18:11:56][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  128. [18:11:56][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  129. [18:11:56][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  130. [18:11:56][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  131. [18:11:56][W][component:215]: Components should block for at most 20-30ms.
  132. [18:11:56][W][wifi_esp32:458]: Event: Disconnected ssid='tantal' bssid=FC:34:97:0B:AB:80 reason='Association Expired'
  133. [18:11:56][W][wifi:639]: WiFi Unknown connection status 0
  134. [18:11:56][I][wifi:300]: WiFi Connecting to 'tantal'...
  135. [18:11:56][W][wifi:639]: WiFi Unknown connection status 0
  136. [18:11:58][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  137. [18:11:58][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  138. [18:11:58][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  139. [18:11:58][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  140. [18:11:58][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  141. [18:11:58][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  142. [18:11:58][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  143. [18:11:58][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  144. [18:11:58][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  145. [18:11:58][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  146. [18:11:58][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  147. [18:11:58][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  148. [18:11:58][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  149. [18:11:58][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  150. [18:11:58][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  151. [18:11:58][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  152. [18:11:58][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  153. [18:11:58][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  154. [18:11:58][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  155. [18:11:58][W][component:215]: Components should block for at most 20-30ms.
  156. [18:12:00][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  157. [18:12:00][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  158. [18:12:00][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  159. [18:12:00][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  160. [18:12:00][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  161. [18:12:00][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  162. [18:12:00][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  163. [18:12:00][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  164. [18:12:00][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  165. [18:12:00][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  166. [18:12:00][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  167. [18:12:00][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  168. [18:12:00][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  169. [18:12:00][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  170. [18:12:00][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  171. [18:12:00][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  172. [18:12:00][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  173. [18:12:00][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  174. [18:12:00][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  175. [18:12:00][W][component:215]: Components should block for at most 20-30ms.
  176. [18:12:01][D][wifi:455]: Starting scan...
  177. [18:12:02][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  178. [18:12:02][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  179. [18:12:02][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  180. [18:12:02][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  181. [18:12:02][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  182. [18:12:02][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  183. [18:12:02][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  184. [18:12:02][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  185. [18:12:02][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  186. [18:12:02][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  187. [18:12:02][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  188. [18:12:02][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  189. [18:12:02][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  190. [18:12:02][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  191. [18:12:02][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  192. [18:12:02][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  193. [18:12:02][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  194. [18:12:02][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  195. [18:12:02][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  196. [18:12:02][W][component:215]: Components should block for at most 20-30ms.
  197. [18:12:03][D][sensor:094]: 'Uptime Sensor': Sending state 15.07600 s with 0 decimals of accuracy
  198. [18:12:04][D][wifi:470]: Found networks:
  199. [18:12:04][I][wifi:514]: - 'ap-garaz' (14:DD:A9:CE:86:C0) ▂▄▆█
  200. [18:12:04][D][wifi:515]:    Channel: 12
  201. [18:12:04][D][wifi:516]:    RSSI: -82 dB
  202. [18:12:04][I][wifi:514]: - 'tantal' (FC:34:97:0B:AB:80) ▂▄▆█
  203. [18:12:04][D][wifi:515]:    Channel: 1
  204. [18:12:04][D][wifi:516]:    RSSI: -71 dB
  205. [18:12:04][D][wifi:519]: - 'o2b_guest' (FC:34:97:0B:AB:81) ▂▄▆█
  206. [18:12:04][I][wifi:300]: WiFi Connecting to 'ap-garaz'...
  207. [18:12:04][W][wifi:582]: Incomplete connection.
  208. [18:12:04][I][wifi:300]: WiFi Connecting to 'ap-garaz'...
  209. [18:12:04][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  210. [18:12:04][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  211. [18:12:04][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  212. [18:12:04][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  213. [18:12:04][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  214. [18:12:04][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  215. [18:12:04][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  216. [18:12:04][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  217. [18:12:04][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  218. [18:12:04][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  219. [18:12:04][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  220. [18:12:04][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  221. [18:12:04][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  222. [18:12:04][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  223. [18:12:04][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  224. [18:12:04][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  225. [18:12:04][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  226. [18:12:04][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  227. [18:12:04][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  228. [18:12:04][W][component:215]: Components should block for at most 20-30ms.
  229. [18:12:05][I][wifi:587]: WiFi Connected!
  230. [18:12:05][C][wifi:405]:  Local MAC: 3C:E9:0E:8B:CC:CC
  231. [18:12:05][C][wifi:410]:  SSID: 'ap-garaz'
  232. [18:12:05][C][wifi:411]:  IP Address: 192.168.0.231
  233. [18:12:05][C][wifi:413]:  BSSID: 14:DD:A9:CE:86:C0
  234. [18:12:05][C][wifi:414]:  Hostname: 'current-shunt'
  235. [18:12:05][C][wifi:416]:  Signal strength: -84 dB ▂▄▆█
  236. [18:12:05][C][wifi:420]:  Channel: 12
  237. [18:12:05][C][wifi:421]:  Subnet: 255.255.255.0
  238. [18:12:05][C][wifi:422]:  Gateway: 192.168.0.1
  239. [18:12:05][C][wifi:423]:  DNS1: 192.168.0.102
  240. [18:12:05][C][wifi:424]:  DNS2: 8.8.8.8
  241. [18:12:05][C][ota:097]: Over-The-Air Updates:
  242. [18:12:05][C][ota:098]:  Address: current-shunt.local:3232
  243. [18:12:05][C][api:025]: Setting up Home Assistant API server...
  244. [18:12:05][I][app:062]: setup() finished successfully!
  245. [18:12:05][D][text_sensor:064]: 'ESP IP Address': Sending state '192.168.0.231'
  246. [18:12:05][D][text_sensor:064]: 'ESP Connected SSID': Sending state 'ap-garaz'
  247. [18:12:05][D][sensor:094]: 'WiFi Signal Sensor': Sending state -83.00000 dBm with 0 decimals of accuracy
  248. [18:12:05][I][app:102]: ESPHome version 2023.12.5 compiled on Jan 15 2024, 18:11:14
  249. [18:12:05][I][app:104]: Project tahc81.current-shunt version 1.0.0
  250. [18:12:05][C][wifi:573]: WiFi:
  251. [18:12:05][C][wifi:405]:  Local MAC: 3C:E9:0E:8B:CC:CC
  252. [18:12:05][C][wifi:410]:  SSID: 'ap-garaz'
  253. [18:12:05][C][wifi:411]:  IP Address: 192.168.0.231
  254. [18:12:05][C][wifi:413]:  BSSID: 14:DD:A9:CE:86:C0
  255. [18:12:05][C][wifi:414]:  Hostname: 'current-shunt'
  256. [18:12:05][C][wifi:416]:  Signal strength: -83 dB ▂▄▆█
  257. [18:12:05][C][wifi:420]:  Channel: 12
  258. [18:12:05][C][wifi:421]:  Subnet: 255.255.255.0
  259. [18:12:05][C][wifi:422]:  Gateway: 192.168.0.1
  260. [18:12:05][C][wifi:423]:  DNS1: 192.168.0.102
  261. [18:12:05][C][wifi:424]:  DNS2: 8.8.8.8
  262. [18:12:05][C][logger:443]: Logger:
  263. [18:12:05][C][logger:444]:  Level: DEBUG
  264. [18:12:05][C][logger:445]:  Log Baud Rate: 115200
  265. [18:12:05][C][logger:447]:  Hardware UART: UART0
  266. [18:12:05][C][i2c.arduino:053]: I2C Bus:
  267. [18:12:05][C][i2c.arduino:054]:  SDA Pin: GPIO5
  268. [18:12:05][C][i2c.arduino:055]:  SCL Pin: GPIO4
  269. [18:12:05][C][i2c.arduino:056]:  Frequency: 400000 Hz
  270. [18:12:05][C][i2c.arduino:059]:  Recovery: bus successfully recovered
  271. [18:12:05][I][i2c.arduino:069]: Results from i2c bus scan:
  272. [18:12:05][I][i2c.arduino:075]: Found i2c device at address 0x40
  273. [18:12:06][C][uptime.sensor:031]: Uptime Sensor 'Uptime Sensor'
  274. [18:12:06][C][uptime.sensor:031]:  Device Class: 'duration'
  275. [18:12:06][C][uptime.sensor:031]:  State Class: 'total_increasing'
  276. [18:12:06][C][uptime.sensor:031]:  Unit of Measurement: 's'
  277. [18:12:06][C][uptime.sensor:031]:  Accuracy Decimals: 0
  278. [18:12:06][C][uptime.sensor:031]:  Icon: 'mdi:timer-outline'
  279. [18:12:06][C][ina228:194]: INA228:
  280. [18:12:06][C][ina228:195]:  Address: 0x40
  281. [18:12:06][C][ina228:201]:  Update Interval: 2.0s
  282. [18:12:06][C][ina228:203]:  Shunt Voltage 'INA228 Shunt Voltage'
  283. [18:12:06][C][ina228:203]:    Device Class: 'voltage'
  284. [18:12:06][C][ina228:203]:    State Class: 'measurement'
  285. [18:12:06][C][ina228:203]:    Unit of Measurement: 'V'
  286. [18:12:06][C][ina228:203]:    Accuracy Decimals: 2
  287. [18:12:06][C][ina228:204]:  Bus Voltage 'INA228 Bus Voltage'
  288. [18:12:06][C][ina228:204]:    Device Class: 'voltage'
  289. [18:12:06][C][ina228:204]:    State Class: 'measurement'
  290. [18:12:06][C][ina228:204]:    Unit of Measurement: 'V'
  291. [18:12:06][C][ina228:204]:    Accuracy Decimals: 2
  292. [18:12:06][C][ina228:205]:  Die Temperature 'INA228 DIE Temperature'
  293. [18:12:06][C][ina228:205]:    Device Class: 'temperature'
  294. [18:12:06][C][ina228:205]:    State Class: 'measurement'
  295. [18:12:06][C][ina228:205]:    Unit of Measurement: '°C'
  296. [18:12:06][C][ina228:205]:    Accuracy Decimals: 3
  297. [18:12:06][C][ina228:206]:  Current 'INA228 Current'
  298. [18:12:06][C][ina228:206]:    Device Class: 'current'
  299. [18:12:06][C][ina228:206]:    State Class: 'measurement'
  300. [18:12:06][C][ina228:206]:    Unit of Measurement: 'A'
  301. [18:12:06][C][ina228:206]:    Accuracy Decimals: 3
  302. [18:12:06][C][ina228:207]:  Power 'INA228 Power'
  303. [18:12:06][C][ina228:207]:    Device Class: 'power'
  304. [18:12:06][C][ina228:207]:    State Class: 'measurement'
  305. [18:12:06][C][ina228:207]:    Unit of Measurement: 'W'
  306. [18:12:06][C][ina228:207]:    Accuracy Decimals: 2
  307. [18:12:06][C][ina228:208]:  Energy 'INA228 Energy'
  308. [18:12:06][C][ina228:208]:    Device Class: 'energy'
  309. [18:12:06][C][ina228:208]:    State Class: 'measurement'
  310. [18:12:06][C][ina228:208]:    Unit of Measurement: 'J'
  311. [18:12:06][C][ina228:208]:    Accuracy Decimals: 2
  312. [18:12:06][C][ina228:209]:  Charge 'INA228 Charge'
  313. [18:12:06][C][ina228:209]:    Device Class: 'energy'
  314. [18:12:06][C][ina228:209]:    State Class: 'measurement'
  315. [18:12:06][C][ina228:209]:    Unit of Measurement: 'C'
  316. [18:12:06][C][ina228:209]:    Accuracy Decimals: 2
  317. [18:12:06][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  318. [18:12:06][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  319. [18:12:06][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  320. [18:12:06][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  321. [18:12:06][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  322. [18:12:06][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  323. [18:12:06][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  324. [18:12:06][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  325. [18:12:06][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  326. [18:12:06][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  327. [18:12:06][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  328. [18:12:06][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  329. [18:12:06][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  330. [18:12:06][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  331. [18:12:06][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  332. [18:12:06][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  333. [18:12:06][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  334. [18:12:06][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  335. [18:12:06][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  336. [18:12:06][W][component:215]: Components should block for at most 20-30ms.
  337. [18:12:06][D][api:102]: Accepted 192.168.0.102
  338. [18:12:06][C][restart:068]: Restart Switch 'ESP32-CS restart'
  339. [18:12:06][C][restart:070]:  Icon: 'mdi:restart'
  340. [18:12:06][C][restart:091]:  Restore Mode: always OFF
  341. [18:12:06][D][api.connection:1121]: Home Assistant 2024.1.2 (192.168.0.102): Connected successfully
  342. [18:12:06][C][mdns:115]: mDNS:
  343. [18:12:06][C][mdns:116]:  Hostname: current-shunt
  344. [18:12:06][C][ota:097]: Over-The-Air Updates:
  345. [18:12:06][C][ota:098]:  Address: current-shunt.local:3232
  346. [18:12:06][C][api:139]: API Server:
  347. [18:12:06][C][api:140]:  Address: current-shunt.local:6053
  348. [18:12:06][C][api:144]:  Using noise encryption: NO
  349. [18:12:06][C][wifi_signal.sensor:009]: WiFi Signal 'WiFi Signal Sensor'
  350. [18:12:06][C][wifi_signal.sensor:009]:  Device Class: 'signal_strength'
  351. [18:12:06][C][wifi_signal.sensor:009]:  State Class: 'measurement'
  352. [18:12:06][C][wifi_signal.sensor:009]:  Unit of Measurement: 'dBm'
  353. [18:12:06][C][wifi_signal.sensor:009]:  Accuracy Decimals: 0
  354. [18:12:06][C][wifi_info:009]: WifiInfo IPAddress 'ESP IP Address'
  355. [18:12:06][C][wifi_info:011]: WifiInfo SSID 'ESP Connected SSID'
  356. [18:12:06][D][api:102]: Accepted 192.168.0.101
  357. [18:12:07][D][api.connection:1121]: Home Assistant 2024.1.2 (192.168.0.101): Connected successfully
  358. [18:12:08][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  359. [18:12:08][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  360. [18:12:08][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  361. [18:12:08][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  362. [18:12:08][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  363. [18:12:08][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  364. [18:12:08][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  365. [18:12:08][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  366. [18:12:08][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  367. [18:12:08][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  368. [18:12:08][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  369. [18:12:08][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  370. [18:12:08][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  371. [18:12:08][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  372. [18:12:08][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  373. [18:12:08][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  374. [18:12:08][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  375. [18:12:08][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  376. [18:12:08][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  377. [18:12:08][W][component:215]: Components should block for at most 20-30ms.
  378. [18:12:10][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  379. [18:12:10][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  380. [18:12:10][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  381. [18:12:10][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  382. [18:12:10][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  383. [18:12:10][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  384. [18:12:10][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  385. [18:12:10][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  386. [18:12:10][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  387. [18:12:10][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  388. [18:12:10][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  389. [18:12:10][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  390. [18:12:10][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  391. [18:12:10][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  392. [18:12:10][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  393. [18:12:10][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  394. [18:12:10][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  395. [18:12:10][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  396. [18:12:10][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  397. [18:12:10][W][component:215]: Components should block for at most 20-30ms.
  398. [18:12:12][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  399. [18:12:12][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  400. [18:12:12][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  401. [18:12:12][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  402. [18:12:12][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  403. [18:12:12][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  404. [18:12:12][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  405. [18:12:12][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  406. [18:12:12][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  407. [18:12:12][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  408. [18:12:12][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  409. [18:12:12][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  410. [18:12:12][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  411. [18:12:12][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  412. [18:12:12][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  413. [18:12:12][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  414. [18:12:12][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  415. [18:12:12][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  416. [18:12:12][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  417. [18:12:12][W][component:215]: Components should block for at most 20-30ms.
  418. [18:12:14][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  419. [18:12:14][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  420. [18:12:14][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  421. [18:12:14][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  422. [18:12:14][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  423. [18:12:14][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  424. [18:12:14][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  425. [18:12:14][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  426. [18:12:14][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  427. [18:12:14][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  428. [18:12:14][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  429. [18:12:14][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  430. [18:12:14][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  431. [18:12:14][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  432. [18:12:14][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  433. [18:12:14][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  434. [18:12:14][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  435. [18:12:14][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  436. [18:12:14][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  437. [18:12:14][W][component:215]: Components should block for at most 20-30ms.
  438. [18:12:16][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  439. [18:12:16][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  440. [18:12:16][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  441. [18:12:16][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  442. [18:12:16][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  443. [18:12:16][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  444. [18:12:16][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  445. [18:12:16][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  446. [18:12:16][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  447. [18:12:16][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  448. [18:12:16][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  449. [18:12:16][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  450. [18:12:16][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  451. [18:12:16][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  452. [18:12:16][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  453. [18:12:16][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  454. [18:12:16][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  455. [18:12:16][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  456. [18:12:16][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  457. [18:12:16][W][component:215]: Components should block for at most 20-30ms.
  458. [18:12:18][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  459. [18:12:18][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  460. [18:12:18][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  461. [18:12:18][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  462. [18:12:18][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  463. [18:12:18][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  464. [18:12:18][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  465. [18:12:18][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  466. [18:12:18][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  467. [18:12:18][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  468. [18:12:18][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  469. [18:12:18][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  470. [18:12:18][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  471. [18:12:18][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  472. [18:12:18][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  473. [18:12:18][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  474. [18:12:18][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  475. [18:12:18][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  476. [18:12:18][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  477. [18:12:18][W][component:215]: Components should block for at most 20-30ms.
  478. [18:12:20][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  479. [18:12:20][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  480. [18:12:20][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  481. [18:12:20][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  482. [18:12:20][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  483. [18:12:20][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  484. [18:12:20][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  485. [18:12:20][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  486. [18:12:20][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  487. [18:12:20][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  488. [18:12:20][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  489. [18:12:20][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  490. [18:12:20][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  491. [18:12:20][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  492. [18:12:20][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  493. [18:12:20][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  494. [18:12:20][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  495. [18:12:20][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  496. [18:12:20][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  497. [18:12:20][W][component:215]: Components should block for at most 20-30ms.
  498. [18:12:22][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  499. [18:12:22][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  500. [18:12:22][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  501. [18:12:22][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  502. [18:12:22][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  503. [18:12:22][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  504. [18:12:22][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  505. [18:12:22][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  506. [18:12:22][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  507. [18:12:22][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  508. [18:12:22][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  509. [18:12:22][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  510. [18:12:22][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  511. [18:12:22][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  512. [18:12:22][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  513. [18:12:22][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  514. [18:12:22][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  515. [18:12:22][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  516. [18:12:22][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  517. [18:12:22][W][component:215]: Components should block for at most 20-30ms.
  518. [18:12:24][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  519. [18:12:24][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  520. [18:12:24][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  521. [18:12:24][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00C0B601
  522. [18:12:24][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  523. [18:12:24][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  524. [18:12:24][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00C0B601
  525. [18:12:24][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  526. [18:12:24][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  527. [18:12:24][D][ina228:149]: read_power_1 ret= 0, 0x00180000
  528. [18:12:24][D][ina228:152]: read_power_2 ret= 0, 0x00000018
  529. [18:12:24][D][sensor:094]: 'INA228 Power': Sending state 0.00146 W with 2 decimals of accuracy
  530. [18:12:24][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  531. [18:12:24][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  532. [18:12:24][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  533. [18:12:24][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  534. [18:12:24][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  535. [18:12:24][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  536. [18:12:24][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  537. [18:12:24][W][component:215]: Components should block for at most 20-30ms.
  538. [18:12:26][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  539. [18:12:26][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  540. [18:12:26][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  541. [18:12:26][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  542. [18:12:26][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  543. [18:12:26][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  544. [18:12:26][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  545. [18:12:26][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  546. [18:12:26][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  547. [18:12:26][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  548. [18:12:26][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  549. [18:12:26][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  550. [18:12:26][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  551. [18:12:26][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  552. [18:12:26][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  553. [18:12:26][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  554. [18:12:26][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  555. [18:12:26][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  556. [18:12:26][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  557. [18:12:26][W][component:215]: Components should block for at most 20-30ms.
  558. [18:12:28][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  559. [18:12:28][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  560. [18:12:28][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  561. [18:12:28][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00D04302
  562. [18:12:28][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  563. [18:12:28][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  564. [18:12:28][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00D04302
  565. [18:12:28][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  566. [18:12:28][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  567. [18:12:28][D][ina228:149]: read_power_1 ret= 0, 0x00210000
  568. [18:12:28][D][ina228:152]: read_power_2 ret= 0, 0x00000021
  569. [18:12:28][D][sensor:094]: 'INA228 Power': Sending state 0.00201 W with 2 decimals of accuracy
  570. [18:12:28][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  571. [18:12:28][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  572. [18:12:28][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  573. [18:12:28][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  574. [18:12:28][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  575. [18:12:28][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  576. [18:12:28][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  577. [18:12:28][W][component:215]: Components should block for at most 20-30ms.
  578. [18:12:30][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  579. [18:12:30][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  580. [18:12:30][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  581. [18:12:30][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00507C00
  582. [18:12:30][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  583. [18:12:30][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  584. [18:12:30][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00507C00
  585. [18:12:30][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  586. [18:12:30][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  587. [18:12:30][D][ina228:149]: read_power_1 ret= 0, 0x00080000
  588. [18:12:30][D][ina228:152]: read_power_2 ret= 0, 0x00000008
  589. [18:12:30][D][sensor:094]: 'INA228 Power': Sending state 0.00049 W with 2 decimals of accuracy
  590. [18:12:30][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  591. [18:12:30][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  592. [18:12:30][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  593. [18:12:30][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  594. [18:12:30][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  595. [18:12:30][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  596. [18:12:30][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  597. [18:12:30][W][component:215]: Components should block for at most 20-30ms.
  598. [18:12:32][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  599. [18:12:32][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  600. [18:12:32][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  601. [18:12:32][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  602. [18:12:32][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  603. [18:12:32][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  604. [18:12:32][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  605. [18:12:32][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  606. [18:12:32][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  607. [18:12:32][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  608. [18:12:32][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  609. [18:12:32][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  610. [18:12:32][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  611. [18:12:32][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  612. [18:12:32][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  613. [18:12:32][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  614. [18:12:32][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  615. [18:12:32][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  616. [18:12:32][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  617. [18:12:32][W][component:215]: Components should block for at most 20-30ms.
  618. [18:12:33][D][sensor:094]: 'Uptime Sensor': Sending state 45.07600 s with 0 decimals of accuracy
  619. [18:12:34][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  620. [18:12:34][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  621. [18:12:34][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  622. [18:12:34][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00302504
  623. [18:12:34][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  624. [18:12:34][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  625. [18:12:34][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00302504
  626. [18:12:34][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  627. [18:12:34][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  628. [18:12:34][D][ina228:149]: read_power_1 ret= 0, 0x003A0000
  629. [18:12:34][D][ina228:152]: read_power_2 ret= 0, 0x0000003A
  630. [18:12:34][D][sensor:094]: 'INA228 Power': Sending state 0.00354 W with 2 decimals of accuracy
  631. [18:12:34][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  632. [18:12:34][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  633. [18:12:34][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  634. [18:12:34][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  635. [18:12:34][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  636. [18:12:34][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  637. [18:12:34][W][component:214]: Component ina228.sensor took a long time for an operation (0.14 s).
  638. [18:12:34][W][component:215]: Components should block for at most 20-30ms.
  639. [18:12:35][D][sensor:094]: 'WiFi Signal Sensor': Sending state -78.00000 dBm with 0 decimals of accuracy
  640. [18:12:36][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00400000
  641. [18:12:36][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  642. [18:12:36][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  643. [18:12:36][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00302504
  644. [18:12:36][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  645. [18:12:36][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  646. [18:12:36][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00302504
  647. [18:12:36][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  648. [18:12:36][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  649. [18:12:36][D][ina228:149]: read_power_1 ret= 0, 0x00410000
  650. [18:12:36][D][ina228:152]: read_power_2 ret= 0, 0x00000041
  651. [18:12:36][D][sensor:094]: 'INA228 Power': Sending state 0.00397 W with 2 decimals of accuracy
  652. [18:12:36][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF400000
  653. [18:12:36][D][ina228:164]: read_energy_2 ret= 0, 0x40FFFF
  654. [18:12:36][D][sensor:094]: 'INA228 Energy': Sending state 4159.99902 J with 2 decimals of accuracy
  655. [18:12:36][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF400000
  656. [18:12:36][D][ina228:178]: read_charge_2 is TRUE, 0x40FFFF
  657. [18:12:36][D][sensor:094]: 'INA228 Charge': Sending state 81.24998 C with 2 decimals of accuracy
  658. [18:12:36][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  659. [18:12:36][W][component:215]: Components should block for at most 20-30ms.
  660. [18:12:38][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  661. [18:12:38][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  662. [18:12:38][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  663. [18:12:38][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00402504
  664. [18:12:38][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  665. [18:12:38][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  666. [18:12:38][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00402504
  667. [18:12:38][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  668. [18:12:38][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  669. [18:12:38][D][ina228:149]: read_power_1 ret= 0, 0x003E0000
  670. [18:12:38][D][ina228:152]: read_power_2 ret= 0, 0x0000003E
  671. [18:12:38][D][sensor:094]: 'INA228 Power': Sending state 0.00378 W with 2 decimals of accuracy
  672. [18:12:38][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  673. [18:12:38][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  674. [18:12:38][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  675. [18:12:38][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  676. [18:12:38][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  677. [18:12:38][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  678. [18:12:38][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  679. [18:12:38][W][component:215]: Components should block for at most 20-30ms.
  680. [18:12:40][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  681. [18:12:40][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  682. [18:12:40][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  683. [18:12:40][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  684. [18:12:40][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  685. [18:12:40][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  686. [18:12:40][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  687. [18:12:40][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  688. [18:12:40][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  689. [18:12:40][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  690. [18:12:40][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  691. [18:12:40][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  692. [18:12:40][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  693. [18:12:40][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  694. [18:12:40][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  695. [18:12:40][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  696. [18:12:40][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  697. [18:12:40][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  698. [18:12:40][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  699. [18:12:40][W][component:215]: Components should block for at most 20-30ms.
  700. [18:12:42][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  701. [18:12:42][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  702. [18:12:42][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  703. [18:12:42][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  704. [18:12:42][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  705. [18:12:42][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  706. [18:12:42][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  707. [18:12:42][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  708. [18:12:42][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  709. [18:12:42][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  710. [18:12:42][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  711. [18:12:42][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  712. [18:12:42][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  713. [18:12:42][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  714. [18:12:42][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  715. [18:12:42][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  716. [18:12:42][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  717. [18:12:42][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  718. [18:12:42][W][component:214]: Component ina228.sensor took a long time for an operation (0.12 s).
  719. [18:12:42][W][component:215]: Components should block for at most 20-30ms.
  720. [18:12:44][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  721. [18:12:44][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  722. [18:12:44][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  723. [18:12:44][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  724. [18:12:44][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  725. [18:12:44][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  726. [18:12:44][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  727. [18:12:44][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  728. [18:12:44][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  729. [18:12:44][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  730. [18:12:44][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  731. [18:12:44][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  732. [18:12:44][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  733. [18:12:44][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  734. [18:12:44][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  735. [18:12:44][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  736. [18:12:44][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  737. [18:12:44][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  738. [18:12:44][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  739. [18:12:44][W][component:215]: Components should block for at most 20-30ms.
  740. [18:12:46][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  741. [18:12:46][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  742. [18:12:46][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  743. [18:12:46][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  744. [18:12:46][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  745. [18:12:46][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  746. [18:12:46][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  747. [18:12:46][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  748. [18:12:46][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  749. [18:12:46][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  750. [18:12:46][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  751. [18:12:46][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  752. [18:12:46][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  753. [18:12:46][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  754. [18:12:46][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  755. [18:12:46][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  756. [18:12:46][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  757. [18:12:46][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  758. [18:12:46][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  759. [18:12:46][W][component:215]: Components should block for at most 20-30ms.
  760. [18:12:48][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  761. [18:12:48][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  762. [18:12:48][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  763. [18:12:48][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  764. [18:12:48][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  765. [18:12:48][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  766. [18:12:48][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  767. [18:12:48][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  768. [18:12:48][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  769. [18:12:48][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  770. [18:12:48][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  771. [18:12:48][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  772. [18:12:48][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  773. [18:12:48][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  774. [18:12:48][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  775. [18:12:48][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  776. [18:12:48][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  777. [18:12:48][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  778. [18:12:48][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  779. [18:12:48][W][component:215]: Components should block for at most 20-30ms.
  780. [18:12:50][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00300000
  781. [18:12:50][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  782. [18:12:50][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  783. [18:12:50][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  784. [18:12:50][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  785. [18:12:50][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  786. [18:12:50][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00100000
  787. [18:12:50][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  788. [18:12:50][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  789. [18:12:50][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  790. [18:12:50][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  791. [18:12:50][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  792. [18:12:50][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  793. [18:12:50][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  794. [18:12:50][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  795. [18:12:50][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  796. [18:12:50][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  797. [18:12:50][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  798. [18:12:50][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  799. [18:12:50][W][component:215]: Components should block for at most 20-30ms.
  800. [18:12:52][D][ina228:030]: read_s20_4_ 0x04, ret= 0, raw 0x00400000
  801. [18:12:52][D][ina228:113]: read_volt_shunt_ is TRUE, 0x00000000
  802. [18:12:52][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  803. [18:12:52][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  804. [18:12:52][D][ina228:122]: read_voltage_ is TRUE, 0x00000000
  805. [18:12:52][D][sensor:094]: 'INA228 Bus Voltage': Sending state 0.00000 V with 2 decimals of accuracy
  806. [18:12:52][D][ina228:030]: read_s20_4_ 0x05, ret= 0, raw 0x00000000
  807. [18:12:52][D][ina228:140]: read_voltage_ is TRUE, 0x00000000
  808. [18:12:52][D][sensor:094]: 'INA228 Current': Sending state 0.00000 A with 3 decimals of accuracy
  809. [18:12:52][D][ina228:149]: read_power_1 ret= 0, 0x00000000
  810. [18:12:52][D][ina228:152]: read_power_2 ret= 0, 0x00000000
  811. [18:12:52][D][sensor:094]: 'INA228 Power': Sending state 0.00000 W with 2 decimals of accuracy
  812. [18:12:52][D][ina228:161]: read_energy_1 ret= 0, 0xFFFF300000
  813. [18:12:52][D][ina228:164]: read_energy_2 ret= 0, 0x30FFFF
  814. [18:12:52][D][sensor:094]: 'INA228 Energy': Sending state 3135.99902 J with 2 decimals of accuracy
  815. [18:12:52][D][ina228:173]: read_charge_1 is TRUE, 0xFFFF300000
  816. [18:12:52][D][ina228:178]: read_charge_2 is TRUE, 0x30FFFF
  817. [18:12:52][D][sensor:094]: 'INA228 Charge': Sending state 61.24998 C with 2 decimals of accuracy
  818. [18:12:52][W][component:214]: Component ina228.sensor took a long time for an operation (0.13 s).
  819. [18:12:52][W][component:215]: Components should block for at most 20-30ms.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!