API tools faq
paste
Advertisement
teknoraver

MA5671A bootlog

teknoraver
Nov 15th, 2024
22
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.97 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.10.49 (sean@Lantiq-DEV) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 14.07_ltq) ) #1 Sat May 20 09:01:27 CST 2017
  2. [ 0.000000] SoC: Falcon rev A22
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU revision is: 00019556 (MIPS 34Kc)
  5. [ 0.000000] MIPS: machine is SFP - Lantiq Falcon SFP Stick
  6. [ 0.000000] e=memsize=64
  7. [ 0.000000] e=initrd_start=0xA0000000
  8. [ 0.000000] e=initrd_size=0x0
  9. [ 0.000000] e=flash_start=0xB0000000
  10. [ 0.000000] e=flash_size=0x41401C
  11. [ 0.000000] MEMSIZE = 67108864
  12. [ 0.000000] Determined physical RAM map:
  13. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  14. [ 0.000000] debug: ignoring loglevel setting.
  15. [ 0.000000] User-defined physical RAM map:
  16. [ 0.000000] memory: 03f00000 @ 00000000 (usable)
  17. [ 0.000000] Initrd not found or empty - disabling initrd
  18. [ 0.000000] Zone ranges:
  19. [ 0.000000] Normal [mem 0x00000000-0x03efffff]
  20. [ 0.000000] Movable zone start for each node
  21. [ 0.000000] Early memory node ranges
  22. [ 0.000000] node 0: [mem 0x00000000-0x03efffff]
  23. [ 0.000000] On node 0 totalpages: 16128
  24. [ 0.000000] free_area_init_node: node 0, pgdat 80312610, node_mem_map 81003ec0
  25. [ 0.000000] Normal zone: 126 pages used for memmap
  26. [ 0.000000] Normal zone: 0 pages reserved
  27. [ 0.000000] Normal zone: 16128 pages, LIFO batch:3
  28. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  29. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  30. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  31. [ 0.000000] pcpu-alloc: [0] 0
  32. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16002
  33. [ 0.000000] Kernel command line: rootfstype=squashfs,jffs2 ip=192.168.1.10:192.168.1.100:192.168.2.0:255.255.255.0:::off machtype=SFP ignore_loglevel vpe1_load_addr=0x83f00000 vpe1_mem=1M mem=63M mtdparts=sflash:256k(uboot)ro,512k(uboot_env),7424k(linux),8192k(image1) console=ttyLTQ0,115200 init=/etc/preinit
  34. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  35. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  36. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  37. [ 0.000000] Writing ErrCtl register=00077e7e
  38. [ 0.000000] Readback ErrCtl register=00077e7e
  39. [ 0.000000] Memory: 60204k/64512k available (2587k kernel code, 4308k reserved, 664k data, 192k init, 0k highmem)
  40. [ 0.000000] NR_IRQS:328
  41. [ 0.000000] Setting up vectored interrupts
  42. [ 0.000000] CPU Clock: 400MHz
  43. [ 0.032000] Calibrating delay loop... 265.98 BogoMIPS (lpj=531968)
  44. [ 0.036000] pid_max: default: 32768 minimum: 301
  45. [ 0.040000] Mount-cache hash table entries: 512
  46. [ 0.048000] pinctrl core: initialized pinctrl subsystem
  47. [ 0.052000] NET: Registered protocol family 16
  48. [ 0.072000] pinctrl-falcon pinctrl.4: Init done
  49. [ 0.092000] bio: create slab <bio-0> at 0
  50. [ 0.096000] FALC(tm) ON GPIO Driver, (C) 2012 Lantiq Deutschland Gmbh
  51. [ 0.104000] Switching to clocksource MIPS
  52. [ 0.112000] NET: Registered protocol family 2
  53. [ 0.116000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  54. [ 0.124000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  55. [ 0.128000] TCP: Hash tables configured (established 512 bind 512)
  56. [ 0.136000] TCP: reno registered
  57. [ 0.140000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  58. [ 0.144000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  59. [ 0.152000] NET: Registered protocol family 1
  60. [ 0.156000] RPC: Registered named UNIX socket transport module.
  61. [ 0.160000] RPC: Registered udp transport module.
  62. [ 0.168000] RPC: Registered tcp transport module.
  63. [ 0.172000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  64. [ 0.180000] EASY98000 LED driver, Version 1.0.1 (c) Copyright 2013, Lantiq Deutschland GmbH
  65. [ 0.188000] Wired TLB entries for Linux read_c0_wired() = 0
  66. [ 0.196000] config3 0x2425 MT 1
  67. [ 0.196000] MVPControl 0x2, STLB 0 VPC 1 EVP 0
  68. [ 0.196000] mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1
  69. [ 0.208000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  70. [ 0.216000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  71. [ 0.224000] msgmni has been set to 117
  72. [ 0.232000] io scheduler noop registered
  73. [ 0.232000] io scheduler deadline registered (default)
  74. [ 0.240000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 104) is a lantiq,asc
  75. [ 0.248000] console [ttyLTQ0] enabled, bootconsole disabled
  76. [ 0.268000] m25p80 spi0.0: found s25fl129p1, expected s25fl129p0
  77. [ 0.272000] m25p80 spi0.0: s25fl129p1 (16384 Kbytes)
  78. [ 0.276000] 4 cmdlinepart partitions found on MTD device sflash
  79. [ 0.280000] Creating 4 MTD partitions on "sflash":
  80. [ 0.288000] 0x000000000000-0x000000040000 : "uboot"
  81. [ 0.292000] 0x000000040000-0x0000000c0000 : "uboot_env"
  82. [ 0.300000] 0x0000000c0000-0x000000800000 : "linux"
  83. [ 0.304000] 0x0000001e6e31-0x000000800000 : "rootfs"
  84. [ 0.308000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  85. [ 0.324000] mtd: device 3 (rootfs) set to be root filesystem
  86. [ 0.328000] mtd: partition "rootfs_data" created automatically, ofs=0x400000, len=0x400000
  87. [ 0.336000] 0x000000400000-0x000000800000 : "rootfs_data"
  88. [ 0.344000] 0x000000800000-0x000001000000 : "image1"
  89. [ 0.352000] wdt 1f8803f0.watchdog: Init done
  90. [ 0.356000] TCP: cubic registered
  91. [ 0.356000] NET: Registered protocol family 17
  92. [ 0.360000] 8021q: 802.1Q VLAN Support v1.8
  93. [ 12.424000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  94. [ 12.428000] Freeing unused kernel memory: 192K (80330000 - 80360000)
  95. [ 15.312000] pps_core: LinuxPPS API ver. 1 registered
  96. [ 15.316000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  97. [ 15.328000] PTP clock support registered
  98. [ 19.164000] jffs2: notice: (274) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 23 of xref (0 dead, 2 orphan) found.
  99. [ 21.356000] IFXOS, Version 1.6.6 (c) Copyright 2009, Lantiq Deutschland GmbH
  100. [ 21.432000] NET: Registered protocol family 10
  101. [ 21.452000] GPON SFP I2C Slave Driver, Version 2.2.1 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
  102. [ 21.472000] [sfp_i2c] vpe code <sfp_i2c_vpe.bin> with size <4188 bytes> loaded!
  103. [ 21.476000] VPE loader: VPE1 running successfully
  104. [ 21.572000] FALC(tm) ON Optic Driver, version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
  105. [ 22.036000] FALC(tm) ON Base Driver, Version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
  106. [ 22.056000] [onu] GPIO5 stuck detected : PPS/LOS/NTR8K features are not available
  107. [ 22.072000] FALC(tm) ON Ethernet Driver, Version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
  108. [ 22.088000] mod_f24s: Unknown symbol skb_complete_tx_timestamp (err 0)
  109. [ 22.100000] mod_f24s: Unknown symbol skb_complete_tx_timestamp (err 0)
  110. [ 29.380000] i2c /dev entries driver
  111. [ 29.404000] Custom GPIO-based I2C driver version 0.1.1
  112. [ 29.416000] i2c-gpio i2c-gpio.0: using pins 37 (SDA) and 38 (SCL)
  113. [ 34.000000] [onu] serial number: HWTC094a0a9c
  114. [ 34.328000] [onu] password: 88561813
  115. [ 34.524000] [onu] GPHY Firmware loaded into RAM (phy11g.bin)
  116. [ 34.792000] [onu] PE[255] firmware loaded v9.90.6.1
  117. [ 37.252000] libphy: Falcon MDIO: probed
  118. [ 37.284000] IPv6: ADDRCONF(NETDEV_UP): host: link is not ready
  119. [ 37.336000] IPv6: ADDRCONF(NETDEV_UP): lct0: link is not ready
  120. [ 39.360000] IPv6: ADDRCONF(NETDEV_UP): lct0: link is not ready
  121. [ 44.996000] IPv6: ADDRCONF(NETDEV_UP): host: link is not ready
  122. [ 45.760000] [onu] PLOAM Rx - message lost
  123. [ 45.944000] device exc entered promiscuous mode
  124. [ 322.048000] IPv6: ADDRCONF(NETDEV_CHANGE): host: link becomes ready
  125. [ 322.120000] IPv6: ADDRCONF(NETDEV_CHANGE): lct0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!