ASA 275 - PrusaSlicer

# generated by PrusaSlicer 2.5.0+MacOS-arm64 on 2023-02-11 at 19:13:30 UTC
avoid_crossing_perimeters = 1
avoid_crossing_perimeters_max_detour = 0
bed_custom_model =
bed_custom_texture =
bed_shape = 0x0,290x0,290x270,0x270
bed_temperature = 50
before_layer_gcode =
between_objects_gcode =
bottom_fill_pattern = monotonic
bottom_solid_layers = 4
bottom_solid_min_thickness = 0.5
bridge_acceleration = 0
bridge_angle = 0
bridge_fan_speed = 60
bridge_flow_ratio = 1
bridge_speed = 30
brim_separation = 0
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
color_change_gcode = M600
colorprint_heights =
complete_objects = 0
cooling = 1
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_acceleration = 0
default_filament_profile = ""
default_print_profile =
deretract_speed = 45
disable_fan_first_layers = 1
dont_support_bridges = 1
draft_shield = disabled
duplicate_distance = 6
elefant_foot_compensation = 0.2
end_filament_gcode = "; Filament-specific end gcode"
end_gcode = END_PRINT\n
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0.48
external_perimeter_speed = 60
external_perimeters_first = 0
extra_loading_move = -2
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_colour = ""
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0.48
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FD8008
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 639
filament_density = 1.07
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 8
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = "ASA 275 - Spectrum - RatRig"
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = ASA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Prusa Polymers
filament_wipe = 0
fill_angle = 45
fill_density = 15%
fill_pattern = gyroid
first_layer_acceleration = 0
first_layer_acceleration_over_raft = 0
first_layer_bed_temperature = 60
first_layer_extrusion_width = 0.48
first_layer_height = 0.2
first_layer_speed = 30
first_layer_speed_over_raft = 30
first_layer_temperature = 230
full_fan_speed_layer = 0
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 40
gcode_comments = 0
gcode_flavor = reprap
gcode_label_objects = 0
gcode_resolution = 0.0125
gcode_substitutions =
high_current_on_filament_swap = 0
host_type = duet
infill_acceleration = 0
infill_anchor = 1000
infill_anchor_max = 1000
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.48
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 200
interface_shells = 0
ironing = 0
ironing_flowrate = 7%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_gcode =
layer_height = 0.2
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 6000,5000
machine_max_acceleration_extruding = 6000,1250
machine_max_acceleration_retracting = 6000,1250
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 3000,1000
machine_max_acceleration_y = 3000,1000
machine_max_acceleration_z = 100,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 400,200
machine_max_feedrate_y = 400,200
machine_max_feedrate_z = 10,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 5,10
machine_max_jerk_y = 5,10
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_fan_speed = 40
max_layer_height = 0.4
max_print_height = 270
max_print_speed = 200
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_fan_speed = 20
min_feature_size = 25%
min_layer_height = 0.05
min_print_speed = 15
min_skirt_length = 0
mmu_segmented_region_max_width = 0
notes =
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
overhangs = 1
parking_pos_retraction = 92
pause_print_gcode = M601
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.48
perimeter_generator = arachne
perimeter_speed = 200
perimeters = 3
physical_printer_settings_id = RatRig Klipper
post_process = /Applications/ArcWelder;"\n/Applications/preprocess_cancellation"
print_host =
print_settings_id = RatRig - 0.2 mm ALMOST FULL SPEED
printer_model =
printer_notes =
printer_settings_id = RatRig Klipper - 0.4 mm
printer_technology = FFF
printer_variant =
printer_vendor =
printhost_apikey =
printhost_cafile =
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
remaining_times = 1
resolution = 0
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.2
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 50
seam_position = aligned
silent_mode = 0
single_extruder_multi_material = 0
single_extruder_multi_material_priming = 1
skirt_distance = 3
skirt_height = 1
skirts = 2
slice_closing_radius = 0.049
slicing_mode = regular
slowdown_below_layer_time = 15
small_perimeter_speed = 40
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.48
solid_infill_speed = 200
spiral_vase = 0
standby_temperature_delta = -5
start_filament_gcode = ""
start_gcode = ; M190 a M104 musi byt, jinak je PruaSlicer sam vygeneruje. Inicializace je v makru.\nM190 S0 ; set bed temperature and wait for it to be reached\nM104 S0 ; set temperature\n\nSTART_PRINT BED_TEMP=[first_layer_bed_temperature] EXTRUDER_TEMP=[first_layer_temperature] AREA_START_X={first_layer_print_min[0]} AREA_START_Y={first_layer_print_min[1]} AREA_END_X={first_layer_print_max[0]} AREA_END_Y={first_layer_print_max[1]}\nM221 S95 ; set flow\n
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 50
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 50%
temperature = 230
template_custom_gcode =
thick_bridges = 0
thin_walls = 1
threads = 12
thumbnails = 48x48,300x300
thumbnails_format = PNG
toolchange_gcode =
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.48
top_solid_infill_speed = 50
top_solid_layers = 5
top_solid_min_thickness = 0.7
travel_speed = 300
travel_speed_z = 0
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe = 0
wipe_into_infill = 0
wipe_into_objects = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
wiping_volumes_extruders = 70,70
wiping_volumes_matrix = 0
xy_size_compensation = 0
z_offset = 0