Volume Control rev_01

/********* Pleasedontcode.com **********

    Pleasedontcode thanks you for automatic code generation! Enjoy your code!

    - Terms and Conditions:
    You have a non-exclusive, revocable, worldwide, royalty-free license
    for personal and commercial use. Attribution is optional; modifications
    are allowed, but you're responsible for code maintenance. We're not
    liable for any loss or damage. For full terms,
    please visit pleasedontcode.com/termsandconditions.

    - Project: Volume Control
    - Source Code NOT compiled for: Arduino Uno
    - Source Code created on: 2024-09-26 20:13:13

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
    /* The system shall read voltage levels from two */
    /* analog input pins (A0 and A1) connected to a */
    /* potentiometer for volume control, ensuring */
    /* accurate input readings for audio adjustments. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/***** DEFINITION OF ANALOG INPUT PINS *****/
const uint8_t vol_Potentiometer_Vout_PIN_A0 = A0; // Pin for the first potentiometer
const uint8_t vol_Potentiometer_Vout_PIN_A1 = A1; // Pin for the second potentiometer

// Variables to hold the analog readings
int volumeLevelA0 = 0; // Variable to store the reading from A0
int volumeLevelA1 = 0; // Variable to store the reading from A1

void setup(void)
{
    // Initialize the analog input pins
    pinMode(vol_Potentiometer_Vout_PIN_A0, INPUT); // Set A0 as input for the first potentiometer
    pinMode(vol_Potentiometer_Vout_PIN_A1, INPUT); // Set A1 as input for the second potentiometer
}

void loop(void)
{
    // Read the voltage levels from the potentiometers
    volumeLevelA0 = analogRead(vol_Potentiometer_Vout_PIN_A0); // Read voltage from A0
    volumeLevelA1 = analogRead(vol_Potentiometer_Vout_PIN_A1); // Read voltage from A1

    // Here you can add code to use the volumeLevelA0 and volumeLevelA1 values
    // For example, you might want to map them to a volume level or send them to a display
}

/* END CODE */