Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ::: RC8 Update! :::
- :::::::::::::::::::::::::::::::::::::::::::::::::
- ::: ErrorHandling.bat by -JpE- 20220628231816 :::
- :::::::::::::::::::::::::::::::::::::::::::::::::
- ::: This has settled in nicely and is
- ::: Great to the level at which below it are hard hat,
- ::: YEO, Top Secret Development areas. Jp Aug 17th, 23.
- if not defined util3 set util3="%bats%\utility3.bat"
- ::: ^^^^^^^^^^^^^^^^^^^^^^^^^^^
- if not defined vers set vers=v8.7.0.10 20231108073214 by -JpE-
- title Error: #%errorlevel% on %date% @ %time% in %vers%
- ::: set testwell=3 to enter full test mode.
- set /a testwell=0
- REM set /a testwell=1
- REM if %code2% equ 7 set /a testwell=3
- REM if %code2% equ 7 set /a testwell=5
- if %code2% equ 7 set /a testwell=1
- rem ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ NOTE!
- set "txt21=%~1" & set "sndr42=%~2"
- ::: Proof of Concept for makeline function.
- :welcome
- set chars2Pad=*-=-
- REM call %util3% charrev :revchars "%chars2Pad%"
- set /a counter213=0
- set txt2=Welcome to the Error Handling Module
- rem Degradated all the below to one line now!
- call %util3% t :middleman "%chars2Pad%" "%txt2%"
- REM call %util3% line2 :makeline "%chars2Pad%" "%txt2%"
- REM call %util3% pd1 pd2 "%line2%" "%chars2Pad%" "%txt2%"
- REM echo . & echo %line2%
- REM echo %charrev%%pd1% %txt2% %pd2%%charrev%
- REM echo %line2% & echo .
- ::: See utility3.bat for the functions that were here!
- :start
- if not exist %util3% echo . & echo Can't find utility3.bat! & echo . & pause & echo . & exit /b
- set txt=Backup
- if not defined r3v3rs3 set /a r3v3rs3=1
- if %r3v3rs3% equ 2 set txt=RESTORE
- set chars2Pad=-=*
- call %util3% charrev :revchars "%chars2Pad%"
- echo . & set myLine1=Calling ErrorHandling.bat %vers%
- call %util3% line4 :makeline "%chars2Pad%" "%myLine1%"
- call %util3% sizestr1 :strlen "%line4%"
- set myLine2=ATTENTION: An Error Occurred in the %oper% %txt% Operation!
- call %util3% line0 :makeline "%chars2Pad%" "%myLine2%"
- call %util3% sizestr2 :strlen "%line0%"
- set /a lgr0=0 & set /a gap1=1 & set /a gap2=1
- if %sizestr1% gtr %sizestr2% set /a lgr0=1
- if %sizestr2% gtr %sizestr1% set /a lgr0=2
- if %lgr0% equ 0 if %testwell% gtr 2 (
- echo The lines are the same size!)
- if %lgr0% equ 1 if %testwell% gtr 2 echo line1 is longer.
- if %lgr0% equ 2 if %testwell% gtr 2 echo line2 is longer.
- if %testwell% gtr 2 echo .
- if %lgr0% equ 2 set line4=%line0%
- ::: Now that that's settled we can just...
- call %util3% gappa1 gappa2 "%line4%" "%chars2Pad%" "%myLine1%"
- call %util3% gappa3 gappa4 "%line4%" "%chars2Pad%" "%myLine2%"
- echo %line4% & echo %charrev%%gappa1% %myLine1% %gappa2%%charrev%
- echo %line4% & echo %charrev%%gappa3% %myLine2% %gappa4%%charrev%
- echo %line4% & echo .
- if not defined where set /a where=0
- if %where% gtr 5 goto fatal
- if %code2% equ 5 goto nothingSent
- if %code2% neq 7 if exist %test% goto unhandled
- ::: SPLIT DOWN TO ISOLATE and Test NEWEST CODE BELOW.
- if %testwell% gtr 1 call :testcode
- if %testwell% gtr 0 goto tester
- if %testwell% gtr 0 echo . & echo ReTesting... & echo . & pause & echo .
- if %testwell% gtr 1 goto return
- :::=[ ACTIONS ]=:::
- :drive
- echo %l2% & echo .
- echo " >>===> UNLOCK BITLOCKER for D:\ AND TRY AGAIN."
- echo . & set msg="Are you ready to try again? (Y/n): "
- choice /c yn /n /t 180 /d y /m %msg%
- echo . & echo %l2% & if %errorlevel% neq 2 set /a exit2=5
- if %errorlevel% neq 1 if %counter213% lss 10 (
- set /a counter213+=1 & goto drive )
- goto return
- :okay
- echo .
- echo %sl%
- echo **** Operation (s) Cancelled by: %username% ****
- echo %sl%
- echo .
- echo %line4%
- goto return
- ::: Fatal Error! ** if %where% gtr 5 **
- :fatal
- echo %l2% & echo . & echo %sl%
- echo ** "FATAL ERROR: #"%where% <-===<< **
- echo **** "copies_backups.bat" Can't be Found! ****
- echo %sl% & echo . & pause & echo . & echo %l2% & set /a exit2=6
- goto return
- ::: echo if %where% equ 1 thru 4 then blah blah bla
- ::: originally Called from copy_control.bat
- :unhandled
- if %where% equ 1 goto drive
- echo . & echo %time% & echo .
- set msg1=An unhandled exception occurred
- set msg2=in the copy-subs somewhere:
- set msg3=The where code == %where%
- call %util3% line :makeline "%chars2Pad%" "%msg1%"
- echo %line% & echo %charrev% %msg1% %charrev% & echo %line%
- call %util3% s1 s2 "%line%" "%chars2Pad%" "%msg2%"
- echo %charrev%%s1% %msg2% %s2%%charrev% & echo %line%
- call %util3% s1 s2 "%line%" "%chars2Pad%" "%msg3%"
- echo %charrev%%s1% %msg3% %s2%%charrev% & echo %line%
- if %testwell% gtr 0 echo . & set msg="Test run :unh again? (y/N): "
- if %testwell% gtr 0 choice /c yn /n /t 300 /d n /m %msg%
- if %testwell% gtr 0 if %errorlevel% gtr 1 echo . & echo Bye! & echo . & echo See ya... & echo . & exit
- exit /b
- ::: By contrast, the :padder function maintains programmable left end spacing and merely fills in the end of the line to match the parms given by l1, I think it is offhand.
- :testcode <GLOBAL: no args sent or returned>
- echo . & echo errorlevel == %errorlevel% & echo .
- echo code2 == %code2% & echo . & pause & echo .
- exit /b %errorlevel%
- :::=-[ Fairly good to here.]-=:::
- :::-=[ DANGER! UNDER CONSTRUCTION. HARD HAT REQUIRED BELOW THIS LEVEL! ]=-:::
- :tester <string txt21, string sndr42>
- if %code2% neq 7 (goto drive) else (
- call :next nextcall "%txt21%" "%sndr42%" )
- if %errorlevel% neq 0 echo . & echo OH NO! & echo . & pause & echo . & goto return
- ::: It is now implicit that errorlevel is zero and code.2 == 7!
- if %testwell% lss 1 echo . & echo NOT IN TEST MODE RIGHT NOW! & echo . & set /a code2=0 & goto return
- if not defined nextcall goto duh
- if "%nextcall%" equ "" goto duh
- call :%nextcall% result6 %sndr42%
- ::: calls next1 or next2
- if not defined result6 set result6=No results were returned.
- if "%result6%" equ "" set result6=No result found.
- set msg4=Result: %result6%
- set chrs=-=-/\-=-\/
- REM set chrs=-=*/\
- call %util3% t :middleman "%chrs%" "%msg4%"
- if %testwell% gtr 1 echo . & echo Test Again? & pause & CLS
- if %testwell% gtr 1 goto return
- if %testwell% gtr 0 call :unhandled
- exit /b
- :duh
- echo . & echo Unanticipated Exception!
- echo . & pause & goto unhandled
- ::: Route the Exception accordingly.
- :next <stringVarReturned next, stringVar msg1, stringVar sender>
- setlocal & set "msg1=%~2" & set "sender=%~3" & echo .
- if %errorlevel% equ 0 (
- echo . & echo The :next function succeeded! & echo .
- if %testwell% gtr 1 pause & echo .
- ) else ( echo .
- echo errorlevel == %errorlevel% was indicated.
- echo . )
- ::: To TestWell :next2 & this else: flip line below to gtr 0
- REM if %testwell% gtr 0 set sender=ErrorHandling.bat
- if %testwell% gtr 1 set sender=ErrorHandling.bat
- if "%sender%" equ "Silent_mode.bat" (
- set next=next1 ) else ( set next=next2 )
- if %testwell% gtr 0 echo . & echo Next is %next% & pause
- endlocal & set "%~1=%next%"
- exit /b %errorlevel%
- ::: See :padder error for the call.
- :next1 <string result, string sender>
- setlocal & set "sender=%~2"
- echo . & set line1=This error was detected from the Silent_mode.bat Code File.
- set chars2Pad=+=:=-
- call %util3% t :middleman "%chars2Pad%" "%line1%"
- set "result=The Padder in Util3 has FAILED."
- endlocal & set "%~1=%result%"
- exit /b %errorlevel%
- ::: DEVELOPING Next & as needed below. (A called function)
- :next2 <string result2return, string sender>
- setlocal & set "sender=%~2"
- set msg2=The error was detected in %sender% on %date% @ %time%
- set chars1=-=*=/\
- ::: v8.7.0.09 20231106063214 by -JpE-
- call %util3% t :middleman "%chars1%" "%msg2%"
- ::: Saves lines, is easy to link, and reliable.
- ::: Change the text w/o worry of adjusting the display!
- ::: Reuses existing functions that are also stand-alone.
- ::: It makes the line reverses the chars and calculates the spacing on each side to center it in whatev chars are used!
- :::::::::::::::::::::::::::::::::::::::::
- ::: Design to save to nFo 2log file. :::
- :::::::::::::::::::::::::::::::::::::::::
- set msg3=Now we have hit the next2 function!
- set chars2=-=_=-/\
- REM set chars2=-=*
- call %util3% t :middleman "%chars2%" "%msg3%"
- set "result=I'm not sure what this will do."
- endlocal & set "%~1=%result%"
- exit /b %errorlevel%
- ::: Early Design Phase Only, down here. Experimenting. Flesh Out if Used.
- :nothingSent
- echo . & echo Nothing THERE-ERROR! & echo . & pause & echo .
- goto return
- REM ::: ^ UNDER CONSTRUCTION (Layout only)
- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
- ::: Design more where handling depending on their usages. :::
- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
- :return
- REM :: TESTCODE
- if %testwell% gtr 2 echo . & echo The End of ErrorHandling module. & echo . & pause & echo .
- ::: 100% -JpE-
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement