Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- => setenv initrd_high '0xffffffff'
- => setenv kernel_addr_r '0x10007fc0'
- => setenv fdt_addr_r '0x18000000'
- => setenv ramdisk_addr_r '0x13000000'
- => setenv tftp_bootfile 'imx6q-phytec-mira-rdk-nand/uImage'
- => setenv fdt_file 'imx6q-phytec-mira-rdk-nand/uImage-imx6q-phytec-mira-rdk-nand.dtb'
- => setenv ramdisk_file 'imx6q-phytec-mira-rdk-nand/uRamdisk'
- => setenv bootcmd 'tftp ${kernel_addr_r} ${tftp_bootfile}; tftp ${ramdisk_addr_r} ${ramdisk_file}; tftp ${fdt_addr_r} ${fdt_file}; bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}'
- => setenv bootargs 'console=ttymxc1,115200n8 ip=192.168.42.11:192.168.42.1:192.168.42.1:255.255.255.0::eth0: ramdisk_size=75536 root=/dev/ram rw'
- => setenv netup 'setenv ipaddr 192.168.42.11; setenv serverip 192.168.42.1; setenv netmask 255.255.255.0'
- => setenv loaduimage 'run netup; ping $serverip; boot'
- => run loaduimage
- Using ethernet@2188000 device
- host 192.168.42.1 is alive
- Using ethernet@2188000 device
- TFTP from server 192.168.42.1; our IP address is 192.168.42.11
- Filename 'imx6q-phytec-mira-rdk-nand/uImage'.
- Load address: 0x10007fc0
- Loading: #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #####################
- 6.9 MiB/s
- done
- Bytes transferred = 12702272 (c1d240 hex)
- Using ethernet@2188000 device
- TFTP from server 192.168.42.1; our IP address is 192.168.42.11
- Filename 'imx6q-phytec-mira-rdk-nand/uRamdisk'.
- Load address: 0x13000000
- Loading: #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #########
- 6.3 MiB/s
- done
- Bytes transferred = 27791708 (1a8115c hex)
- Using ethernet@2188000 device
- TFTP from server 192.168.42.1; our IP address is 192.168.42.11
- Filename 'imx6q-phytec-mira-rdk-nand/uImage-imx6q-phytec-mira-rdk-nand.dtb'.
- Load address: 0x18000000
- Loading: ###
- 3.9 MiB/s
- done
- Bytes transferred = 41325 (a16d hex)
- ## Booting kernel from Legacy Image at 10007fc0 ...
- Image Name: Linux-5.10.17-custom-student-deb
- Image Type: ARM Linux Kernel Image (no loading done) (uncompressed)
- Data Size: 12702208 Bytes = 12.1 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Loading init Ramdisk from Legacy Image at 13000000 ...
- Image Name: Test Ramdisk Image
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 27791644 Bytes = 26.5 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 18000000
- Booting using the fdt blob at 0x18000000
- XIP Kernel Image (no loading done)
- Using Device Tree in place at 18000000, end 1800d16c
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.10.17-custom-student-debug-00001-gd5741bc06cb6 (student@e450-tr1) (arm-resy-linux-gnueabi-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.0.20200730) #1 SMP Thu Mar 11 18:11:30 EET 2021
- [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 64 MiB at 0x4c000000
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff]
- [ 0.000000] percpu: Embedded 381 pages/cpu s1530676 r8192 d21708 u1560576
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
- [ 0.000000] Kernel command line: console=ttymxc1,115200n8 ip=192.168.42.11:192.168.42.1:192.168.42.1:255.255.255.0::eth0: ramdisk_size=75536 root=/dev/ram rw
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 899928K/1048576K available (17408K kernel code, 2722K rwdata, 8224K rodata, 4096K init, 7242K bss, 83112K reserved, 65536K cma-reserved, 196608K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] ftrace: allocating 55562 entries in 109 pages
- [ 0.000000] ftrace: allocated 109 pages with 5 groups
- [ 0.000000] Running RCU self tests
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] rcu: RCU lockdep checking is enabled.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
- [ 0.000000] Rude variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] L2C-310 errata 752271 769419 enabled
- [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
- [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
- [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
- [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
- [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
- [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
- [ 0.000000] random: get_random_bytes called from start_kernel+0x3dc/0x5a0 with crng_init=0
- [ 0.000000] Switching to timer-based delay loop, resolution 333ns
- [ 0.000010] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
- [ 0.000060] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
- [ 0.004505] Console: colour dummy device 80x30
- [ 0.004591] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.004639] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.004683] ... MAX_LOCK_DEPTH: 48
- [ 0.004726] ... MAX_LOCKDEP_KEYS: 8192
- [ 0.004769] ... CLASSHASH_SIZE: 4096
- [ 0.004812] ... MAX_LOCKDEP_ENTRIES: 32768
- [ 0.004853] ... MAX_LOCKDEP_CHAINS: 65536
- [ 0.004895] ... CHAINHASH_SIZE: 32768
- [ 0.004937] memory used by lock dependency info: 4317 kB
- [ 0.004981] memory used for stack traces: 2112 kB
- [ 0.005024] per task-struct memory footprint: 2304 bytes
- [ 0.005157] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
- [ 0.005236] pid_max: default: 32768 minimum: 301
- [ 0.006045] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.006120] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.009496] CPU: Testing write buffer coherency: ok
- [ 0.009665] CPU0: Spectre v2: using BPIALL workaround
- [ 0.011019] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.016769] Setting up static identity map for 0x10300000 - 0x103000ac
- [ 0.019683] rcu: Hierarchical SRCU implementation.
- [ 0.033266] EFI services will not be available.
- [ 0.035200] smp: Bringing up secondary CPUs ...
- [ 0.040129] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.040152] CPU1: Spectre v2: using BPIALL workaround
- [ 0.046283] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.046305] CPU2: Spectre v2: using BPIALL workaround
- [ 0.052430] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.052452] CPU3: Spectre v2: using BPIALL workaround
- [ 0.053938] smp: Brought up 1 node, 4 CPUs
- [ 0.054007] SMP: Total of 4 processors activated (24.00 BogoMIPS).
- [ 0.054067] CPU: All CPU(s) started in SVC mode.
- [ 0.057775] devtmpfs: initialized
- [ 0.153894] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 0.157974] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.158082] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.163103] pinctrl core: initialized pinctrl subsystem
- [ 0.173457] DMI not present or invalid.
- [ 0.175673] NET: Registered protocol family 16
- [ 0.192530] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.207769] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.208502] cpuidle: using governor menu
- [ 0.209368] CPU identified as i.MX6Q, silicon rev 1.5
- [ 1.165001] vdd1p1: supplied by regulator-dummy
- [ 1.211426] vdd3p0: supplied by regulator-dummy
- [ 1.257240] vdd2p5: supplied by regulator-dummy
- [ 3.226225] No ATAGs?
- [ 3.227508] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 3.227624] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 3.250488] debugfs: Directory 'dummy-iomuxc-gpr@20e0000' with parent 'regmap' already present!
- [ 3.254000] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
- [ 3.294946] Serial: AMBA PL011 UART driver
- [ 3.598788] raid6: neonx8 gen() 494 MB/s
- [ 3.768743] raid6: neonx8 xor() 396 MB/s
- [ 3.938738] raid6: neonx4 gen() 1215 MB/s
- [ 4.108744] raid6: neonx4 xor() 789 MB/s
- [ 4.278749] raid6: neonx2 gen() 1130 MB/s
- [ 4.448737] raid6: neonx2 xor() 759 MB/s
- [ 4.618758] raid6: neonx1 gen() 1007 MB/s
- [ 4.788742] raid6: neonx1 xor() 687 MB/s
- [ 4.958817] raid6: int32x8 gen() 230 MB/s
- [ 5.128775] raid6: int32x8 xor() 150 MB/s
- [ 5.298779] raid6: int32x4 gen() 249 MB/s
- [ 5.468773] raid6: int32x4 xor() 160 MB/s
- [ 5.638770] raid6: int32x2 gen() 314 MB/s
- [ 5.808796] raid6: int32x2 xor() 158 MB/s
- [ 5.978744] raid6: int32x1 gen() 323 MB/s
- [ 6.148757] raid6: int32x1 xor() 140 MB/s
- [ 6.148821] raid6: using algorithm neonx4 gen() 1215 MB/s
- [ 6.148878] raid6: .... xor() 789 MB/s, rmw enabled
- [ 6.148934] raid6: using neon recovery algorithm
- [ 6.284164] mxs-dma 110000.dma-apbh: initialized
- [ 6.332906] iommu: Default domain type: Translated
- [ 6.335474] vgaarb: loaded
- [ 6.342828] SCSI subsystem initialized
- [ 6.346104] usbcore: registered new interface driver usbfs
- [ 6.346695] usbcore: registered new interface driver hub
- [ 6.347092] usbcore: registered new device driver usb
- [ 6.370130] i2c i2c-0: IMX I2C adapter registered
- [ 6.374769] i2c i2c-1: IMX I2C adapter registered
- [ 6.407953] i2c i2c-2: IMX I2C adapter registered
- [ 6.414756] pps_core: LinuxPPS API ver. 1 registered
- [ 6.414823] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 6.414976] PTP clock support registered
- [ 6.437479] clocksource: Switched to clocksource mxc_timer1
- [ 8.721909] NET: Registered protocol family 2
- [ 8.726410] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 26624 bytes, linear)
- [ 8.726613] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 8.726856] TCP bind hash table entries: 8192 (order: 6, 393216 bytes, linear)
- [ 8.728390] TCP: Hash tables configured (established 8192 bind 8192)
- [ 8.729226] UDP hash table entries: 512 (order: 3, 57344 bytes, linear)
- [ 8.729531] UDP-Lite hash table entries: 512 (order: 3, 57344 bytes, linear)
- [ 8.730773] NET: Registered protocol family 1
- [ 8.734873] RPC: Registered named UNIX socket transport module.
- [ 8.734994] RPC: Registered udp transport module.
- [ 8.735065] RPC: Registered tcp transport module.
- [ 8.735130] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 8.735208] PCI: CLS 0 bytes, default 64
- [ 8.739177] Trying to unpack rootfs image as initramfs...
- [ 8.740989] rootfs image is not initramfs (no cpio magic); looks like an initrd
- [ 9.262577] Freeing initrd memory: 27144K
- [ 9.263867] hw perfevents: no interrupt-affinity property for /pmu, guessing.
- [ 9.265708] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
- [ 9.280198] Initialise system trusted keyrings
- [ 9.281562] workingset: timestamp_bits=30 max_order=18 bucket_order=0
- [ 9.368055] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 9.375557] NFS: Registering the id_resolver key type
- [ 9.375793] Key type id_resolver registered
- [ 9.375915] Key type id_legacy registered
- [ 9.377064] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 9.377578] ntfs: driver 2.1.32 [Flags: R/O].
- [ 9.383037] xor: measuring software checksum speed
- [ 9.391155] arm4regs : 1253 MB/sec
- [ 9.401127] 8regs : 1009 MB/sec
- [ 9.411429] 32regs : 971 MB/sec
- [ 9.422021] neon : 942 MB/sec
- [ 9.422080] xor: using function: arm4regs (1253 MB/sec)
- [ 9.422160] Key type asymmetric registered
- [ 9.422318] Asymmetric key parser 'x509' registered
- [ 9.422933] bounce: pool size: 64 pages
- [ 9.423184] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 9.423322] io scheduler mq-deadline registered
- [ 9.423392] io scheduler kyber registered
- [ 9.753914] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
- [ 9.754148] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
- [ 10.194087] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
- [ 10.225699] SuperH (H)SCI(F) driver initialized
- [ 10.230511] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud = 5000000) is a IMX
- [ 11.228624] printk: console [ttymxc1] enabled
- [ 11.240207] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 76, base_baud = 5000000) is a IMX
- [ 11.258773] msm_serial: driver initialized
- [ 11.264374] STMicroelectronics ASC driver initialized
- [ 11.278582] STM32 USART driver initialized
- [ 11.332377] panel-simple panel: Specify missing connector_type
- [ 11.417082] brd: module loaded
- [ 11.519349] loop: module loaded
- [ 11.524996] at24 2-0050: supply vcc not found, using dummy regulator
- [ 11.535982] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
- [ 11.593028] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xd3
- [ 11.599617] nand: Winbond W29N08GV
- [ 11.603087] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 11.613050] Bad block table found at page 524224, version 0x01
- [ 11.619624] Bad block table found at page 524160, version 0x01
- [ 11.644604] gpmi-nand 112000.nand-controller: driver registered.
- [ 11.698914] libphy: Fixed MDIO Bus: probed
- [ 11.716860] CAN device driver interface
- [ 11.726658] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
- [ 11.743862] pps pps0: new PPS source ptp0
- [ 11.756838] libphy: fec_enet_mii_bus: probed
- [ 11.773489] fec 2188000.ethernet eth0: registered PHC device 0
- [ 11.786667] e1000e: Intel(R) PRO/1000 Network Driver
- [ 11.791815] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 11.798371] igb: Intel(R) Gigabit Ethernet Network Driver
- [ 11.803835] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 11.840285] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
- [ 11.848114] usbcore: registered new interface driver pegasus
- [ 11.854213] usbcore: registered new interface driver asix
- [ 11.860015] usbcore: registered new interface driver ax88179_178a
- [ 11.866403] usbcore: registered new interface driver cdc_ether
- [ 11.872756] usbcore: registered new interface driver smsc75xx
- [ 11.879055] usbcore: registered new interface driver smsc95xx
- [ 11.885116] usbcore: registered new interface driver net1080
- [ 11.891178] usbcore: registered new interface driver cdc_subset
- [ 11.897506] usbcore: registered new interface driver zaurus
- [ 11.903525] usbcore: registered new interface driver cdc_ncm
- [ 11.927050] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 11.933872] ehci-pci: EHCI PCI platform driver
- [ 11.938728] ehci-platform: EHCI generic platform driver
- [ 11.945394] ehci-orion: EHCI orion driver
- [ 11.950859] SPEAr-ehci: EHCI SPEAr driver
- [ 11.956167] ehci-st: EHCI STMicroelectronics driver
- [ 11.962439] ehci-exynos: EHCI Exynos driver
- [ 11.967999] ehci-atmel: EHCI Atmel driver
- [ 11.973288] tegra-ehci: Tegra EHCI driver
- [ 11.978725] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 11.985077] ohci-pci: OHCI PCI platform driver
- [ 11.989938] ohci-platform: OHCI generic platform driver
- [ 11.996542] SPEAr-ohci: OHCI SPEAr driver
- [ 12.001991] ohci-st: OHCI STMicroelectronics driver
- [ 12.008283] ohci-atmel: OHCI Atmel driver
- [ 12.017125] usbcore: registered new interface driver usb-storage
- [ 12.070251] i2c /dev entries driver
- [ 12.193583] sdhci: Secure Digital Host Controller Interface driver
- [ 12.199943] sdhci: Copyright(c) Pierre Ossman
- [ 12.217677] Synopsys Designware Multimedia Card Interface Driver
- [ 12.234136] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 12.245369] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO
- [ 12.266333] ledtrig-cpu: registered to indicate activity on CPUs
- [ 12.278254] usbcore: registered new interface driver usbhid
- [ 12.283894] usbhid: USB HID core driver
- [ 12.309261] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
- [ 12.326296] NET: Registered protocol family 10
- [ 12.338227] Segment Routing with IPv6
- [ 12.342222] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 12.353415] NET: Registered protocol family 17
- [ 12.357962] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 12.360657] mmc0: new high speed SDHC card at address 1234
- [ 12.366299] can: controller area network core
- [ 12.376794] NET: Registered protocol family 29
- [ 12.377494] mmcblk0: mmc0:1234 SA08G 7.21 GiB
- [ 12.381429] can: raw protocol
- [ 12.389159] can: broadcast manager protocol
- [ 12.393517] can: netlink gateway - max_hops=1
- [ 12.401201] Key type dns_resolver registered
- [ 12.404321] mmcblk0: p1 p2 p3
- [ 12.419415] ThumbEE CPU extension supported.
- [ 12.423801] Registering SWP/SWPB emulation handler
- [ 12.430797] registered taskstats version 1
- [ 12.435034] Loading compiled-in X.509 certificates
- [ 12.461077] Btrfs loaded, crc32c=crc32c-generic
- [ 12.824837] panel-simple panel: Specify missing connector_type
- [ 12.894092] ci_hdrc ci_hdrc.1: EHCI Host Controller
- [ 12.899692] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
- [ 12.937660] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
- [ 12.954431] hub 1-0:1.0: USB hub found
- [ 12.959115] hub 1-0:1.0: 1 port detected
- [ 13.031257] panel-simple panel: Specify missing connector_type
- [ 13.102631] panel-simple panel: Specify missing connector_type
- [ 13.212616] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:03: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:03, irq=POLL)
- [ 20.488795] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 20.497231] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 20.517566] IP-Config: Complete:
- [ 20.520870] device=eth0, hwaddr=50:2d:f4:16:2d:bd, ipaddr=192.168.42.11, mask=255.255.255.0, gw=192.168.42.1
- [ 20.532586] host=192.168.42.11, domain=, nis-domain=(none)
- [ 20.538654] bootserver=192.168.42.1, rootserver=192.168.42.1, rootpath=
- [ 20.550537] RAMDISK: gzip image found at block 0
- [ 25.258755] EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
- [ 25.276531] EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
- [ 25.285283] VFS: Mounted root (ext2 filesystem) on device 1:0.
- [ 25.295886] devtmpfs: mounted
- [ 25.384936] Freeing unused kernel memory: 4096K
- [ 25.391873] Run /sbin/init as init process
- INIT: version 2.98 booting
- Starting udev
- [ 26.376926] udevd[111]: starting version 3.2.9
- [ 26.387066] random: udevd: uninitialized urandom read (16 bytes read)
- [ 26.396140] random: udevd: uninitialized urandom read (16 bytes read)
- [ 26.403011] random: udevd: uninitialized urandom read (16 bytes read)
- [ 26.454095] udevd[112]: starting eudev-3.2.9
- [ 27.487907] urandom_read: 1 callbacks suppressed
- [ 27.487937] random: udevd: uninitialized urandom read (16 bytes read)
- [ 28.040368] random: fast init done
- [ 28.258497] BTRFS: device label cntdata devid 1 transid 42 /dev/mmcblk0p3 scanned by udevd (120)
- [ 29.378027] EXT4-fs (ram0): re-mounted. Opts: errors=remount-ro
- depmod: can't change directory to 'lib/modules/5.10.17-custom-student-debug-00001-gd5741bc06cb6': No such file or directory
- [ 31.608233] random: dd: uninitialized urandom read (512 bytes read)
- Resy (Reliable Embedded Systems Reference Distro) 3.2.66 multi-v7-ml /dev/ttymxc1
- multi-v7-ml login: root
- root@multi-v7-ml:~# cat /proc/cmdline
- console=ttymxc1,115200n8 ip=192.168.42.11:192.168.42.1:192.168.42.1:255.255.255.0::eth0: ramdisk_size=75536 root=/dev/ram rw
- root@multi-v7-ml:~# mount
- /dev/root on / type ext2 (rw,relatime,errors=remount-ro)
- devtmpfs on /dev type devtmpfs (rw,relatime,size=449964k,nr_inodes=112491,mode=755)
- proc on /proc type proc (rw,relatime)
- sysfs on /sys type sysfs (rw,relatime)
- debugfs on /sys/kernel/debug type debugfs (rw,relatime)
- configfs on /sys/kernel/config type configfs (rw,relatime)
- tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
- tmpfs on /var/volatile type tmpfs (rw,relatime)
- devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
- root@multi-v7-ml:~# cat /proc/filesystems
- nodev sysfs
- nodev tmpfs
- nodev bdev
- nodev proc
- nodev cgroup
- nodev cgroup2
- nodev devtmpfs
- nodev configfs
- nodev debugfs
- nodev tracefs
- nodev securityfs
- nodev sockfs
- nodev bpf
- nodev pipefs
- nodev ramfs
- nodev rpc_pipefs
- nodev devpts
- ext3
- ext2
- ext4
- squashfs
- vfat
- msdos
- nodev nfs
- nodev nfs4
- ntfs
- nodev autofs
- nodev mqueue
- nodev ubifs
- btrfs
- nodev pstore
- root@multi-v7-ml:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement