Button Tracker rev_01

/********* Pleasedontcode.com **********

    Pleasedontcode thanks you for automatic code generation! Enjoy your code!

    - Terms and Conditions:
    You have a non-exclusive, revocable, worldwide, royalty-free license
    for personal and commercial use. Attribution is optional; modifications
    are allowed, but you're responsible for code maintenance. We're not
    liable for any loss or damage. For full terms,
    please visit pleasedontcode.com/termsandconditions.

    - Project: Button Tracker
    - Source Code NOT compiled for: ESP32 DevKit V1
    - Source Code created on: 2024-05-11 21:48:56

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
    /* I need a counter to track seconds upon board is */
    /* switched on. The counter starts at 0 on flashing. */
    /* Counter value to be store in EEPROM when the board */
    /* is powering off. */
/****** SYSTEM REQUIREMENT 2 *****/
    /* At each power on the counter shall be read from */
    /* EEPROM and continue to sum the seconds. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <EasyButton.h>  // https://github.com/evert-arias/EasyButton
#include <EEPROM.h>

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void saveCounterToEEPROM(void);
void powerOff(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t button_PushButton_PIN_D4 = 4;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
// Arduino pin where the button is connected to.
#define BUTTON_PIN 4

// Instance of the button.
EasyButton button(BUTTON_PIN);

// Counter to track seconds
unsigned long secondsCounter = 0;

void onPressedForDuration()
{
  // Code to be executed when the button is pressed for the given duration.
}

void setup()
{
  // put your setup code here, to run once:
  pinMode(button_PushButton_PIN_D4, INPUT_PULLUP);

  // Read the counter value from EEPROM
  EEPROM.begin(sizeof(secondsCounter));
  EEPROM.get(0, secondsCounter);

  // Initialize the button.
  button.begin();
  // Add the callback function to be called when the button is pressed for at least the given time.
  button.onPressedFor(2000, onPressedForDuration);
}

void loop()
{
  // put your main code here, to run repeatedly:
  // Continuously read the status of the button.
  button.read();

  // Update the seconds counter
  secondsCounter++;
}

void saveCounterToEEPROM()
{
  // Save the counter value to EEPROM
  EEPROM.put(0, secondsCounter);
  EEPROM.commit();
}

void powerOff()
{
  // Call the function to save the counter value to EEPROM
  saveCounterToEEPROM();

  // Power off the board
}