Metal Detector

2018-12-19 01:23:51  ★ Sam McGinty withdraws a knife from his waistline before approaching a recently received package -..

2018-12-19 01:23:59  ★ -.. placed aside to the wall      ((Sam McGinty))

2018-12-19 01:24:59  ★ Sam McGinty uses the knife to cut through the plastic tape, opening the box afterwards

2018-12-19 01:25:37  ★ Sam McGinty reaches inside for a panel, holding it by one of its ends, pulling it out of the box and -..

2018-12-19 01:26:05  ★ -.. places it carefully on the floor      ((Sam McGinty))

2018-12-19 01:26:37  ★ Sam McGinty reaches for the control unit in the package, lifting it out of the box, setting it beside -.

2018-12-19 01:26:45  ★ -.. the right side panel      ((Sam McGinty))

2018-12-19 01:27:23  ★ Sam McGinty reaches for the left side panel in the box, holding it, lifts it out slowly and places -..

2018-12-19 01:27:32  ★ -.. it aside to the CU      ((Sam McGinty))

2018-12-19 01:29:10  ★ the panels would be positioned as each on the sides of the CU and CU right in the middle      ((Sam McGinty))

2018-12-19 01:30:54  ★ Sam McGinty walks up to the box, reaching for some threaded bolts inside, gripping them and walks -..

2018-12-19 01:31:05  ★ -.. back towards the set on the floor      ((Sam McGinty))

2018-12-19 01:31:57  ★ Sam McGinty drives the bolts one after another to fit their holes on the right side panel, handscrewing-

2018-12-19 01:32:31  ★ -.. them afterwards before repeating the same process for the left side      ((Sam McGinty))

2018-12-19 01:32:56  ★ Sam McGinty paces towards the box, grabbing an allen wrench from its inside, walking back -..

2018-12-19 01:33:01  ★ -.. towards the set      ((Sam McGinty))

2018-12-19 01:33:20  ★ Sam McGinty begins to torque the previously set bolts on the right side panel

2018-12-19 01:33:40  ★ Sam McGinty torques the bolts on the left side panel as well

2018-12-19 01:34:28  ★ Sam McGinty squats down near the CU, uncovers it to reveal its content

2018-12-19 01:35:17  ★ Sam McGinty stretches his hand inside, reaching for the right and left signal cord connectors -..

2018-12-19 01:36:26  ★ -.. linking them to their corresponding ports on the panels respectively      ((Sam McGinty))

2018-12-19 01:36:55  ★ -.. tightening them in place      ((Sam McGinty))

2018-12-19 01:38:55  ★ Sam McGinty grabs the power cord connector, linking it to the power plug on the left side panel -..

2018-12-19 01:39:03  ★ -.. before covering back the CU      ((Sam McGinty))

2018-12-19 01:40:51  ★ Sam McGinty crouches down to the device, grasping on it carefully as he struggles to lift it up -..

2018-12-19 01:40:58  ★ -.. groaning in the process      ((Sam McGinty))

2018-12-19 01:42:38  ★ Sam McGinty begins to drag the device towards the door, placing it in-front

2018-12-19 01:44:21  ★ Sam McGinty grabs the power cable that'd be coming out from the left side, plugging it to a wall -..

2018-12-19 01:44:37  ★ -.. power socket, flicking the power switch on the device      ((Sam McGinty))