API tools faq
paste
Advertisement
RobertBerger

poky-image-minimal beaglexm REV A3

RobertBerger
Jun 14th, 2011
327
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.96 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2011.03-00038-g8d4addc-dirty (Jun 13 2011 - 14:09:56)
  2.  
  3. OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
  4. OMAP3 Beagle board + LPDDR/NAND
  5. I2C: ready
  6. DRAM: 512 MiB
  7. NAND: 0 MiB
  8. MMC: OMAP SD/MMC: 0
  9. *** Warning - readenv() failed, using default environment
  10.  
  11. In: serial
  12. Out: serial
  13. Err: serial
  14. Beagle xM Rev A
  15. No EEPROM on expansion board
  16. Die ID #391a00001bf00000015739ea0700b00c
  17. Hit any key to stop autoboot: 0
  18. reading boot.scr
  19.  
  20. 150 bytes read
  21. Running bootscript from mmc ...
  22. ## Executing script at 82000000
  23. reading uImage
  24.  
  25. 2631884 bytes read
  26. Booting from mmc ...
  27. ## Booting kernel from Legacy Image at 82000000 ...
  28. Image Name: Linux-2.6.37.3-yocto-standard+
  29. Image Type: ARM Linux Kernel Image (uncompressed)
  30. Data Size: 2631820 Bytes = 2.5 MiB
  31. Load Address: 80008000
  32. Entry Point: 80008000
  33. Verifying Checksum ... OK
  34. Loading Kernel Image ... OK
  35. OK
  36.  
  37. Starting kernel ...
  38.  
  39. Uncompressing Linux... done, booting the kernel.
  40. Linux version 2.6.37.3-yocto-standard+ (rber@yocto-vm-1) (gcc version 4.5.1 (GCC) ) #1 PREEMPT Mon Jun 13 12:33:45 EEST 2011
  41. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  42. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  43. Machine: OMAP3 Beagle Board
  44. Memory policy: ECC disabled, Data cache writeback
  45. OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
  46. SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  47. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  48. Kernel command line: console=ttyO2,115200n8 mpurate=1000 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  49. PID hash table entries: 2048 (order: 1, 8192 bytes)
  50. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  51. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  52. Memory: 512MB = 512MB total
  53. Memory: 513960k/513960k available, 10328k reserved, 0K highmem
  54. Virtual kernel memory layout:
  55. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  56. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  57. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  58. vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  59. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  60. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  61. .init : 0xc0008000 - 0xc004e000 ( 280 kB)
  62. .text : 0xc004e000 - 0xc0514574 (4890 kB)
  63. .data : 0xc0516000 - 0xc0565300 ( 317 kB)
  64. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  65. Preemptable hierarchical RCU implementation.
  66. NR_IRQS:402
  67. Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  68. Reprogramming SDRC clock to 332000000 Hz
  69. GPMC revision 5.0
  70. IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  71. Total of 96 interrupts on 1 active controller
  72. OMAP GPIO hardware version 2.5
  73. OMAP clockevent source: GPTIMER12 at 32768 Hz
  74. Console: colour dummy device 80x30
  75. Calibrating delay loop... 505.22 BogoMIPS (lpj=1974272)
  76. pid_max: default: 32768 minimum: 301
  77. Security Framework initialized
  78. Mount-cache hash table entries: 512
  79. CPU: Testing write buffer coherency: ok
  80. ftrace: allocating 15305 entries in 30 pages
  81. regulator: core version 0.5
  82. regulator: dummy:
  83. NET: Registered protocol family 16
  84. OMAP3 Beagle Rev: xM
  85. Found NAND on CS0
  86. Registering NAND on CS0
  87. Unable to get DVI reset GPIO
  88. ------------[ cut here ]------------
  89. WARNING: at /work/rber/poky-bernard-5.0.1-arm-beagle/tmp/work/beagleboard-poky-linux-gnueabi/linux-yocto-2.6.37+git1+212cae404e57ff9dc58c808035770d51325c3512_1+2b2ef940457f0bb40e0fb76937c921c2962364ca-r16/linux/arch/arm/mach-omap2/clock.c:440 omap2_clk_switch_mpurate_at_boot+0x7c/0xb0()
  90. clock: dpll1_ck: unable to set MPU rate to 1000: -22
  91. Modules linked in:
  92. [<c0059728>] (unwind_backtrace+0x0/0xec) from [<c007e668>] (warn_slowpath_common+0x54/0x6c)
  93. [<c007e668>] (warn_slowpath_common+0x54/0x6c) from [<c007e718>] (warn_slowpath_fmt+0x34/0x44)
  94. [<c007e718>] (warn_slowpath_fmt+0x34/0x44) from [<c0011190>] (omap2_clk_switch_mpurate_at_boot+0x7c/0xb0)
  95. [<c0011190>] (omap2_clk_switch_mpurate_at_boot+0x7c/0xb0) from [<c0011310>] (omap3xxx_clk_arch_init+0x20/0x50)
  96. [<c0011310>] (omap3xxx_clk_arch_init+0x20/0x50) from [<c004e4d4>] (do_one_initcall+0xc4/0x198)
  97. [<c004e4d4>] (do_one_initcall+0xc4/0x198) from [<c0008964>] (kernel_init+0x9c/0x180)
  98. [<c0008964>] (kernel_init+0x9c/0x180) from [<c005447c>] (kernel_thread_exit+0x0/0x8)
  99. ---[ end trace 1b75b31a2719ed1c ]---
  100. OMAP DMA hardware revision 5.0
  101. bio: create slab <bio-0> at 0
  102. SCSI subsystem initialized
  103. usbcore: registered new interface driver usbfs
  104. usbcore: registered new interface driver hub
  105. usbcore: registered new device driver usb
  106. i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
  107. twl4030: PIH (irq 7) chaining IRQs 368..375
  108. twl4030: power (irq 373) chaining IRQs 376..383
  109. twl4030: gpio (irq 368) chaining IRQs 384..401
  110. regulator: VUSB1V5: 1500 mV normal standby
  111. regulator: VUSB1V8: 1800 mV normal standby
  112. regulator: VUSB3V1: 3100 mV normal standby
  113. twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  114. regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  115. regulator: VDAC: 1800 mV normal standby
  116. regulator: VDVI: 1800 mV normal standby
  117. regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  118. i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
  119. Advanced Linux Sound Architecture Driver Version 1.0.23.
  120. Switching to clocksource 32k_counter
  121. musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  122. musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  123. NET: Registered protocol family 2
  124. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  125. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  126. TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  127. TCP: Hash tables configured (established 16384 bind 16384)
  128. TCP reno registered
  129. UDP hash table entries: 256 (order: 0, 4096 bytes)
  130. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  131. NET: Registered protocol family 1
  132. RPC: Registered udp transport module.
  133. RPC: Registered tcp transport module.
  134. RPC: Registered tcp NFSv4.1 backchannel transport module.
  135. VFS: Disk quotas dquot_6.5.2
  136. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  137. msgmni has been set to 1003
  138. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  139. io scheduler noop registered
  140. io scheduler deadline registered
  141. io scheduler cfq registered (default)
  142. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  143. omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  144. omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  145. omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  146. console [ttyO2] enabled
  147. omap-hsuart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  148. brd: module loaded
  149. usbcore: registered new interface driver kaweth
  150. pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  151. usbcore: registered new interface driver pegasus
  152. usbcore: registered new interface driver asix
  153. usbcore: registered new interface driver cdc_ether
  154. usbcore: registered new interface driver dm9601
  155. usbcore: registered new interface driver smsc75xx
  156. usbcore: registered new interface driver smsc95xx
  157. usbcore: registered new interface driver net1080
  158. usbcore: registered new interface driver cdc_subset
  159. usbcore: registered new interface driver zaurus
  160. usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  161. usbcore: registered new interface driver int51x1
  162. console [netcon0] enabled
  163. netconsole: network logging started
  164. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  165. ehci-omap.0 supply hsusb0 not found, using dummy regulator
  166. ehci-omap.0 supply hsusb1 not found, using dummy regulator
  167. ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  168. ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  169. ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  170. ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  171. hub 1-0:1.0: USB hub found
  172. hub 1-0:1.0: 3 ports detected
  173. Initializing USB Mass Storage driver...
  174. usbcore: registered new interface driver usb-storage
  175. USB Mass Storage support registered.
  176. mice: PS/2 mouse device common for all mice
  177. twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  178. twl_rtc twl_rtc: Power up reset detected.
  179. twl_rtc twl_rtc: Enabling TWL-RTC.
  180. OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  181. cpuidle: using governor ladder
  182. cpuidle: using governor menu
  183. usbcore: registered new interface driver usbhid
  184. usbhid: USB HID core driver
  185. OMAP3 Beagle/Devkit8000 SoC init
  186. asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  187. ALSA device list:
  188. #0: omap3beagle
  189. TCP cubic registered
  190. NET: Registered protocol family 17
  191. Registering the dns_resolver key type
  192. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  193. Power Management for TI OMAP3.
  194. clock: disabling unused clocks to save power
  195. regulator_init_complete: incomplete constraints, leaving VDVI on
  196. regulator_init_complete: incomplete constraints, leaving VDAC on
  197. twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  198. Waiting for root device /dev/mmcblk0p2...
  199. mmc0: host does not support reading read-only switch. assuming write-enable.
  200. mmc0: new high speed SDHC card at address 0001
  201. mmcblk0: mmc0:0001 00000 3.79 GiB
  202. mmcblk0: p1 p2
  203. usb 1-2: new high speed USB device using ehci-omap and address 2
  204. EXT3-fs: barriers not enabled
  205. hub 1-2:1.0: USB hub found
  206. hub 1-2:1.0: 5 ports detected
  207. usb 1-2.1: new high speed USB device using ehci-omap and address 3
  208. smsc95xx v1.0.4
  209. smsc95xx 1-2.1:1.0: usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 0a:7f:a5:25:1d:25
  210. kjournald starting. Commit interval 5 seconds
  211. EXT3-fs (mmcblk0p2): using internal journal
  212. EXT3-fs (mmcblk0p2): recovery complete
  213. EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  214. VFS: Mounted root (ext3 filesystem) on device 179:2.
  215. Freeing init memory: 280K
  216. INIT: version 2.88 booting
  217. Starting udevudev[55]: starting version 164
  218.  
  219. Configuring network interfaces... udhcpc (v1.17.3) started
  220. Setting IP address 0.0.0.0 on usb0
  221. Sending discover...
  222. usb0: link up, 100Mbps, full-duplex, lpa 0x4DE1
  223. Sending discover...
  224. Sending select for 192.168.42.109...
  225. Lease of 192.168.42.109 obtained, lease time 3600
  226. Setting IP address 192.168.42.109 on usb0
  227. Deleting routers
  228. Adding router 192.168.42.100
  229. Recreating /etc/resolv.conf
  230. Adding DNS server 192.168.42.100
  231. done.
  232. Tue Jun 14 15:10:00 UTC 2011
  233. INIT: Entering runlevel: 5
  234. Starting syslogd/klogd: done
  235.  
  236. Yocto (Built by Poky 5.0.1) 1.0.1 beagleboard ttyO2
  237.  
  238. beagleboard login: root
  239. root@beagleboard:~# /etc/init.d/networking restart
  240. Reconfiguring network interfaces... udhcpc (v1.17.3) started
  241. Setting IP address 0.0.0.0 on usb0
  242. Sending discover...
  243. usb0: link up, 100Mbps, full-duplex, lpa 0x4DE1
  244. Sending discover...
  245. Sending select for 192.168.42.109...
  246. Lease of 192.168.42.109 obtained, lease time 3600
  247. Setting IP address 192.168.42.109 on usb0
  248. Deleting routers
  249. Adding router 192.168.42.100
  250. Recreating /etc/resolv.conf
  251. Adding DNS server 192.168.42.100
  252. done.
  253. root@beagleboard:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!