ext-toolchain-1

# CONF_VERSION is increased each time build/conf/ changes incompatibly
CONF_VERSION = "1"

# Uncomment and change to cache the files Poky downloads in an alternative
# location, default it ${TOPDIR}/downloads
#DL_DIR ?= "${TOPDIR}/downloads"
# Uncomment and change to cache Poky's built staging output in an alternative
# location, default ${TOPDIR}/sstate-cache
#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"

# Uncomment and set to allow bitbake to execute multiple tasks at once.
# For a quadcore, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
# be appropriate.
BB_NUMBER_THREADS = "8"
# Also, make can be passed flags so it run parallel threads e.g.:
PARALLEL_MAKE = "-j 8"

# Set a default machine to target unless a machine is selected from the
# lists below.
#MACHINE ??= "qemux86"

# Supported emulation machines
#MACHINE ?= "qemuarm"
#MACHINE ?= "qemumips"
MACHINE ?= "qemumipsel"
#MACHINE ?= "qemuppc"
#MACHINE ?= "qemux86"
#MACHINE ?= "qemux86-64"

# Supported target hardware for demonstration purposes
#MACHINE ?= "atom-pc"
#MACHINE ?= "beagleboard"
#MACHINE ?= "emenlow"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "routerstationpro"

DISTRO ?= "poky"
# For bleeding edge / experimental / unstable package versions
# DISTRO ?= "poky-bleeding"

BBMASK = ""

# EXTRA_IMAGE_FEATURES allows extra packages to be added to the generated images
# (Some of these are automatically added to certain image types)
# "dbg-pkgs"     - add -dbg packages for all installed packages
#                  (adds symbol information for debugging/profiling)
# "dev-pkgs"     - add -dev packages for all installed packages
#                  (useful if you want to develop against libs in the image)
# "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
# "tools-debug"    - add debugging tools (gdb, strace)
# "tools-profile"  - add profiling tools (oprofile, exmap, lttng valgrind (x86 only))
# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
# "debug-tweaks"   - make an image for suitable of development
#                    e.g. ssh root access has a blank password
# There are other application targets too, see meta/classes/poky-image.bbclass
# and meta/packages/tasks/task-poky.bb for more details.

EXTRA_IMAGE_FEATURES = "tools-debug tools-profile tools-testapps debug-tweaks"

# The default IMAGE_FEATURES above are too large for the mx31phy and
# c700/c750 machines which have limited space. The code below limits
# the default features for those machines.
EXTRA_IMAGE_FEATURES_c7x0 = "tools-testapps debug-tweaks"
EXTRA_IMAGE_FEATURES_mx31phy = "debug-tweaks"
EXTRA_IMAGE_FEATURES_mx31ads = "tools-testapps debug-tweaks"

# A list of packaging systems used in generated images
# The first package type listed will be used for rootfs generation
# include 'package_deb' for debs
# include 'package_ipk' for ipks
# include 'package_rpm' for rpms
#PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
#PACKAGE_CLASSES ?= "package_rpm package_ipk"
PACKAGE_CLASSES ?= "package_ipk"

# mklibs library size optimization is more useful to smaller images,
# and less useful for bigger images. Also mklibs library optimization can break the ABI compatibility, so should not be applied to the images which are tobe
# extended or upgraded later.
#This enabled mklibs library size optimization just for the specified image.
#MKLIBS_OPTIMIZED_IMAGES ?= "poky-image-minimal"
#This enable mklibs library size optimization will be for all the images.
#MKLIBS_OPTIMIZED_IMAGES ?= "all"

# A list of additional classes to use when building the system
# include 'image-mklibs' to reduce shared library files size for an image
# include 'image-prelink' in order to prelink the filesystem image
# include 'image-swab' to perform host system intrusion detection
# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
USER_CLASSES ?= "image-mklibs image-prelink"

# POKYMODE controls the characteristics of the generated packages/images by
# telling poky which type of toolchain to use.
#
# Options include several different EABI combinations and a compatibility
# mode for the OABI mode poky previously used.
#
# The default is "eabi"
# Use "oabi" for machines with kernels < 2.6.18 on ARM for example.
# Use "external-MODE" to use the precompiled external toolchains where MODE
# is the type of external toolchain to use e.g. eabi.
# POKYMODE = "external-eabi"

# Uncomment this to specify where BitBake should create its temporary files.
# Note that a full build of everything in OpenEmbedded will take GigaBytes of hard
# disk space, so make sure to free enough space. The default TMPDIR is
# <build directory>/tmp
#TMPDIR = "${POKYBASE}/build/tmp"

# The following are used to control options related to debugging.
#
# Uncomment this to change the optimization to make debugging easer, at the
# possible cost of performance.

PACKAGE_DEBUG_SPLIT_STYLE = '.debug'
# PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory'

# Uncomment these to build a package such that you can use gprof to profile it.
# NOTE: This will only work with 'linux' targets, not
# 'linux-uclibc', as uClibc doesn't provide the necessary
# object files.  Also, don't build glibc itself with these
# flags, or it'll fail to build.
#
# PROFILE_OPTIMIZATION = "-pg"
# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
# LDFLAGS =+ "-pg"

# Uncomment this if you want BitBake to emit debugging output
# BBDEBUG = "yes"
# Uncomment this if you want BitBake to emit the log if a build fails.
BBINCLUDELOGS = "yes"

# Set this if you wish to make pkgconfig libraries from your system available
# for native builds. Combined with extra ASSUME_PROVIDEDs this can allow
# native builds of applications like oprofileui-native (unsupported feature).
#EXTRA_NATIVE_PKGCONFIG_PATH = ":/usr/lib/pkgconfig"
#ASSUME_PROVIDED += "gtk+-native libglade-native"

ENABLE_BINARY_LOCALE_GENERATION = "1"

# The architecture to build SDK items for, by setting this you can build SDK
# packages for architectures other than the host i.e. building i686 packages
# on an x86_64 host.
# Supported values are i686 and x86_64
#SDKMACHINE ?= "i686"

# Poky can try and fetch packaged-staging packages from a http, https or ftp
# mirror. Set this variable to the root of a pstage directory on a server.
#SSTATE_MIRRORS ?= "\
#file://.* http://someserver.tld/share/sstate/ \n \
#file://.* file:///some/local/dir/sstate/"

# Default to not build 32 bit libs on 64 bit systems, comment this
# out if that is desired
NO32LIBS = "1"

# If you do not use (or have installed) gnome-terminal you will need to
# uncomment these variables and set them to the terminal you wish to use
# when resolving patches which cannot be applied
# Supported shell prefixes for *_TERMCMD and *_TERMCMDRUN ARE:
# GNOME, SCREEN, XTERM and KONSOLE
#TERMCMD = "${KONSOLE_TERMCMD}"
#TERMCMDRUN = "${KONSOLE_TERMCMDRUN}"
INHERIT += "rm_work"

TOOLCHAIN_TYPE = "external"
### CSL public MIPS does <arch>-none-≤os>, so fill in the -none
TARGET_VENDOR = "-none"
### Bring in external-toolchain-csl.bb
TOOLCHAIN_BRAND = "csl"
### Where the CSL version is installed.
TOOLCHAIN_PATH = "/opt/toolchain/sourcery-lite-4.3-51-t2"
### Where inside the CSL install the target libraries exist.
TOOLCHAIN_SYSPATH = "${TOOLCHAIN_PATH}/mips-linux-gnu"
### Add tools to the PATH automatically.
PATH_prepend = "${TOOLCHAIN_PATH}/bin:"