Advertisement
MasWag

smartctl-a.dev.sda

May 6th, 2015
314
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.11 KB | None | 0 0
  1. smartctl 6.3 2014-07-26 r3976 [ppc-linux-3.12.21-gentoo-r1] (local build)
  2. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: ST940110A
  6. Serial Number: 3KW5GW1A
  7. Firmware Version: 3.07
  8. User Capacity: 40,007,761,920 bytes [40.0 GB]
  9. Sector Size: 512 bytes logical/physical
  10. Device is: Not in smartctl database [for details use: -P showall]
  11. ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
  12. Local Time is: Thu May 7 11:04:11 2015 JST
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18.  
  19. General SMART Values:
  20. Offline data collection status: (0x82) Offline data collection activity
  21. was completed without error.
  22. Auto Offline Data Collection: Enabled.
  23. Self-test execution status: ( 25) The self-test routine was aborted by
  24. the host.
  25. Total time to complete Offline
  26. data collection: ( 0) seconds.
  27. Offline data collection
  28. capabilities: (0x5b) SMART execute Offline immediate.
  29. Auto Offline data collection on/off support.
  30. Suspend Offline collection upon new
  31. command.
  32. Offline surface scan supported.
  33. Self-test supported.
  34. No Conveyance Self-test supported.
  35. Selective Self-test supported.
  36. SMART capabilities: (0x0003) Saves SMART data before entering
  37. power-saving mode.
  38. Supports SMART auto save timer.
  39. Error logging capability: (0x01) Error logging supported.
  40. No General Purpose Logging support.
  41. Short self-test routine
  42. recommended polling time: ( 1) minutes.
  43. Extended self-test routine
  44. recommended polling time: ( 31) minutes.
  45.  
  46. SMART Attributes Data Structure revision number: 10
  47. Vendor Specific SMART Attributes with Thresholds:
  48. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  49. 1 Raw_Read_Error_Rate 0x000f 058 052 034 Pre-fail Always - 230835506
  50. 3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
  51. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 47
  52. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 26
  53. 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 194590994
  54. 9 Power_On_Hours 0x0032 067 067 000 Old_age Always - 28918
  55. 10 Spin_Retry_Count 0x0013 100 095 034 Pre-fail Always - 0
  56. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 526
  57. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 668
  58. 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1003030
  59. 194 Temperature_Celsius 0x0022 040 054 000 Old_age Always - 40
  60. 195 Hardware_ECC_Recovered 0x001a 058 052 000 Old_age Always - 230835506
  61. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  62. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  63. 199 UDMA_CRC_Error_Count 0x003e 200 194 000 Old_age Always - 16
  64. 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
  65. 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
  66.  
  67. SMART Error Log Version: 1
  68. ATA Error Count: 580 (device log contains only the most recent five errors)
  69. CR = Command Register [HEX]
  70. FR = Features Register [HEX]
  71. SC = Sector Count Register [HEX]
  72. SN = Sector Number Register [HEX]
  73. CL = Cylinder Low Register [HEX]
  74. CH = Cylinder High Register [HEX]
  75. DH = Device/Head Register [HEX]
  76. DC = Device Command Register [HEX]
  77. ER = Error register [HEX]
  78. ST = Status register [HEX]
  79. Powered_Up_Time is measured from power on, and printed as
  80. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  81. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  82.  
  83. Error 580 occurred at disk power-on lifetime: 23142 hours (964 days + 6 hours)
  84. When the command that caused the error occurred, the device was active or idle.
  85.  
  86. After command completion occurred, registers were:
  87. ER ST SC SN CL CH DH
  88. -- -- -- -- -- -- --
  89. 40 51 00 0a 2e 09 40 Error: UNC at LBA = 0x00092e0a = 601610
  90.  
  91. Commands leading to the command that caused the error were:
  92. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  93. -- -- -- -- -- -- -- -- ---------------- --------------------
  94. 25 00 10 08 2e 09 40 00 00:03:15.677 READ DMA EXT
  95. 25 00 10 08 2e 09 40 00 00:03:10.611 READ DMA EXT
  96. 25 00 10 08 2e 09 40 00 00:03:05.604 READ DMA EXT
  97. 25 00 10 08 2e 09 40 00 00:02:56.623 READ DMA EXT
  98. 25 00 10 08 2e 09 40 00 00:02:51.546 READ DMA EXT
  99.  
  100. Error 579 occurred at disk power-on lifetime: 23142 hours (964 days + 6 hours)
  101. When the command that caused the error occurred, the device was active or idle.
  102.  
  103. After command completion occurred, registers were:
  104. ER ST SC SN CL CH DH
  105. -- -- -- -- -- -- --
  106. 40 51 00 0a 2e 09 40 Error: UNC at LBA = 0x00092e0a = 601610
  107.  
  108. Commands leading to the command that caused the error were:
  109. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  110. -- -- -- -- -- -- -- -- ---------------- --------------------
  111. 25 00 10 08 2e 09 40 00 00:03:15.677 READ DMA EXT
  112. 25 00 10 08 2e 09 40 00 00:03:10.611 READ DMA EXT
  113. 25 00 10 08 2e 09 40 00 00:03:05.604 READ DMA EXT
  114. 25 00 10 08 2e 09 40 00 00:02:56.623 READ DMA EXT
  115. 25 00 10 08 2e 09 40 00 00:02:51.546 READ DMA EXT
  116.  
  117. Error 578 occurred at disk power-on lifetime: 23142 hours (964 days + 6 hours)
  118. When the command that caused the error occurred, the device was active or idle.
  119.  
  120. After command completion occurred, registers were:
  121. ER ST SC SN CL CH DH
  122. -- -- -- -- -- -- --
  123. 40 51 00 0a 2e 09 40 Error: UNC at LBA = 0x00092e0a = 601610
  124.  
  125. Commands leading to the command that caused the error were:
  126. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  127. -- -- -- -- -- -- -- -- ---------------- --------------------
  128. 25 00 10 08 2e 09 40 00 00:03:15.677 READ DMA EXT
  129. 25 00 10 08 2e 09 40 00 00:03:10.611 READ DMA EXT
  130. 25 00 10 08 2e 09 40 00 00:03:05.604 READ DMA EXT
  131. 25 00 10 08 2e 09 40 00 00:02:56.623 READ DMA EXT
  132. 25 00 10 08 2e 09 40 00 00:02:51.546 READ DMA EXT
  133.  
  134. Error 577 occurred at disk power-on lifetime: 23142 hours (964 days + 6 hours)
  135. When the command that caused the error occurred, the device was active or idle.
  136.  
  137. After command completion occurred, registers were:
  138. ER ST SC SN CL CH DH
  139. -- -- -- -- -- -- --
  140. 40 51 00 0a 2e 09 40 Error: UNC at LBA = 0x00092e0a = 601610
  141.  
  142. Commands leading to the command that caused the error were:
  143. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  144. -- -- -- -- -- -- -- -- ---------------- --------------------
  145. 25 00 10 08 2e 09 40 00 00:03:15.677 READ DMA EXT
  146. 25 00 10 08 2e 09 40 00 00:03:10.611 READ DMA EXT
  147. 25 00 10 08 2e 09 40 00 00:03:05.604 READ DMA EXT
  148. 25 00 10 08 2e 09 40 00 00:02:56.623 READ DMA EXT
  149. 25 00 10 08 2e 09 40 00 00:02:51.546 READ DMA EXT
  150.  
  151. Error 576 occurred at disk power-on lifetime: 23142 hours (964 days + 6 hours)
  152. When the command that caused the error occurred, the device was active or idle.
  153.  
  154. After command completion occurred, registers were:
  155. ER ST SC SN CL CH DH
  156. -- -- -- -- -- -- --
  157. 40 51 00 0a 2e 09 40 Error: UNC at LBA = 0x00092e0a = 601610
  158.  
  159. Commands leading to the command that caused the error were:
  160. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  161. -- -- -- -- -- -- -- -- ---------------- --------------------
  162. 25 00 10 08 2e 09 40 00 00:03:15.677 READ DMA EXT
  163. 25 00 10 08 2e 09 40 00 00:03:10.611 READ DMA EXT
  164. 25 00 10 08 2e 09 40 00 00:03:05.604 READ DMA EXT
  165. 25 00 10 08 2e 09 40 00 00:02:56.623 READ DMA EXT
  166. 25 00 10 08 2e 09 40 00 00:02:51.546 READ DMA EXT
  167.  
  168. SMART Self-test log structure revision number 1
  169. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  170. # 1 Short offline Aborted by host 90% 14392 -
  171. # 2 Short offline Aborted by host 90% 14392 -
  172. # 3 Short offline Aborted by host 90% 14392 -
  173. # 4 Short offline Aborted by host 90% 14392 -
  174. # 5 Short offline Aborted by host 90% 14392 -
  175. # 6 Short offline Aborted by host 90% 14392 -
  176. # 7 Short offline Aborted by host 90% 14392 -
  177. # 8 Short offline Aborted by host 90% 14392 -
  178. # 9 Short offline Aborted by host 90% 14392 -
  179. #10 Short offline Aborted by host 90% 14392 -
  180. #11 Short offline Aborted by host 90% 14391 -
  181. #12 Short offline Aborted by host 90% 14391 -
  182. #13 Short offline Aborted by host 90% 14391 -
  183. #14 Short offline Aborted by host 90% 14391 -
  184. #15 Short offline Aborted by host 90% 14391 -
  185. #16 Short offline Aborted by host 90% 14391 -
  186. #17 Short offline Aborted by host 90% 14391 -
  187. #18 Short offline Aborted by host 90% 14391 -
  188. #19 Short offline Aborted by host 90% 14390 -
  189. #20 Short offline Aborted by host 90% 14390 -
  190.  
  191. SMART Selective self-test log data structure revision number 1
  192. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  193. 1 0 0 Not_testing
  194. 2 0 0 Not_testing
  195. 3 0 0 Not_testing
  196. 4 0 0 Not_testing
  197. 5 0 0 Not_testing
  198. Selective self-test flags (0x0):
  199. After scanning selected spans, do NOT read-scan remainder of disk.
  200. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement