Advertisement
snadge

cf kernel jactive cm10.2 boot fail

Aug 24th, 2013
123
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.48 KB | None | 0 0
  1. [ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
  2. [ 0.000000] sec_tsp_mode: LCD_ID = 0x501010, val: 0X501010, ret1: 0x1
  3. [ 0.029785] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  4. [ 0.030181] MSM_DCVS: msm_dcvs_early_init: Unable to initialize DCVS err=4
  5. [ 0.052185] msm_rpm_get_status(): Status id 433 not defined for target
  6. [ 0.052185] msm_rpm_get_status(): Status id 433 not defined for target
  7. [ 0.052185] msm_rpm_get_status(): Status id 433 not defined for target
  8. [ 0.052215] msm_rpm_get_status(): Status id 433 not defined for target
  9. [ 0.052215] msm_rpm_get_status(): Status id 433 not defined for target
  10. [ 0.052215] msm_rpm_get_status(): Status id 433 not defined for target
  11. [ 0.052246] msm_rpm_get_status(): Status id 433 not defined for target
  12. [ 0.052246] msm_rpm_get_status(): Status id 433 not defined for target
  13. [ 0.114929] sensor_power_on_vdd: done
  14. [ 0.170166] i2c i2c-4: Failed to register i2c client s5k3l1yx at 0x34 (-16)
  15. [ 0.170349] i2c i2c-4: Can't create device at 0x34
  16. [ 0.205963] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:3 report inf element:0x0
  17. [ 0.206176] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
  18. [ 0.206420] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:4 report inf element:0x400
  19. [ 0.206848] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
  20. [ 0.281799] Error-Bad Function Input
  21. [ 0.282745] Error-Bad Function Input
  22. [ 0.366790] smd_channel_probe_worker: allocation table not initialized
  23. [ 0.381835] mdm_do_first_power_on: Powering on modem for the first time
  24. [ 0.661041] [mdnie lite] start!
  25. [ 0.661254] [mdnie lite] end!
  26. [ 0.664367] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group dda28a08
  27. [ 0.665222] Inside writeback_driver_init
  28. [ 0.665710] Inside writeback_probe
  29. [ 1.036132] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
  30. [ 1.115081] spi_qsd spi_qsd.0: chipselect 0 already in use
  31. [ 1.119659] spi_qsd spi_qsd.0: can't create new device for jc_spi
  32. [ 1.132965] msm_otg msm_otg: failed to get phy_clk
  33. [ 1.305450] couldn't get usb power supply
  34. [ 1.340148] [jc_spi_init:336] Entered
  35. [ 1.342987] jc_config_isp_irq~~~~~~~~~~
  36. [ 1.346862] msm_eeprom_probe probe_fail
  37. [ 1.355438] msm_sensor_i2c_probe s5k6b2yx probe succeeded
  38. [ 1.360015] msm_eeprom_probe probe_fail
  39. [ 1.404663] mmc0: No card detect facilities available
  40. [ 1.513885] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
  41. [ 1.521881] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
  42. [ 1.547576] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
  43. [ 1.560394] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
  44. [ 1.596099] mmc0: msmsdcc_execute_tuning: found good phase = 0
  45. [ 1.597167] msm8930_audio_init: Not the right machine type
  46. [ 1.597198] msm_audio_init: Not the right machine type
  47. [ 1.612060] mmc0: msmsdcc_execute_tuning: found good phase = 1
  48. [ 1.617919] mmc0: msmsdcc_execute_tuning: found good phase = 2
  49. [ 1.623596] mmc0: msmsdcc_execute_tuning: found good phase = 3
  50. [ 1.629577] mmc0: msmsdcc_execute_tuning: found good phase = 4
  51. [ 1.635253] mmc0: msmsdcc_execute_tuning: found good phase = 5
  52. [ 1.641204] mmc0: msmsdcc_execute_tuning: found good phase = 6
  53. [ 1.646942] mmc0: msmsdcc_execute_tuning: found good phase = 7
  54. [ 1.652770] mmc0: msmsdcc_execute_tuning: found good phase = 8
  55. [ 1.658630] mmc0: msmsdcc_execute_tuning: found good phase = 9
  56. [ 1.664398] mmc0: msmsdcc_execute_tuning: found good phase = 10
  57. [ 1.670257] mmc0: msmsdcc_execute_tuning: found good phase = 11
  58. [ 1.676239] mmc0: msmsdcc_execute_tuning: found good phase = 12
  59. [ 1.683105] mmc0: msmsdcc_execute_tuning: found good phase = 15
  60. [ 1.688232] mmc0: msmsdcc_execute_tuning: finally setting the tuning phase to 8
  61. [ 1.938812] sec-battery sec-battery: sec_battery_probe: Failed to Enable Wakeup Source(-6)
  62. [ 1.961090] 8921_l8: requested voltage range [3000000, 3000000] does not fit within constraints: [2800000, 2800000]
  63. [ 1.970886] irda_device_init called!
  64. [ 1.974578] barcode_emul_ice4: probe complete barcode_emul_probe
  65. [ 2.066284] init: could not import file '/init.qcom.rc' from '/init.rc'
  66. [ 2.072052] init: could not import file '/init.carrier.rc' from '/init.rc'
  67. [ 2.079986] init: do_chown: Could not access /selinux/booleans
  68. [ 2.315612] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
  69. [ 2.327758] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
  70. [ 2.492126] init: cannot find '/system/bin/sysinit', disabling 'sysinit'
  71. [ 2.497955] init: Unable to open persistent property directory /data/property errno: 2
  72. [ 2.509765] init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
  73. [ 2.516723] init: cannot find '/system/bin/vold', disabling 'vold'
  74. [ 2.522918] init: cannot find '/system/bin/auditd', disabling 'auditd'
  75. [ 2.529510] init: cannot find '/system/bin/netd', disabling 'netd'
  76. [ 2.535583] init: cannot find '/system/bin/debuggerd', disabling 'debuggerd'
  77. [ 2.542633] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
  78. [ 2.549285] init: cannot find '/system/bin/surfaceflinger', disabling 'surfaceflinger'
  79. [ 2.557189] init: cannot find '/system/bin/app_process', disabling 'zygote'
  80. [ 2.564086] init: cannot find '/system/bin/drmserver', disabling 'drm'
  81. [ 2.570648] init: cannot find '/system/bin/mediaserver', disabling 'media'
  82. [ 2.577514] init: cannot find '/system/bin/installd', disabling 'installd'
  83. [ 2.584320] init: cannot find '/system/bin/keystore', disabling 'keystore'
  84. [ 2.591217] init: cannot find '/system/bin/handle_compcache', disabling 'compcache'
  85. [ 2.599456] init: cannot find '/system/bin/sh', disabling 'console'
  86. [ 3.889801] synaptics_rmi4_i2c 3-0020: synaptics_ta_cb: device is in suspend state or reflash.
  87. [ 23.289306] PMIC Initiated shutdown cpu_power_off cpu=0
  88. [ 23.289306] PMIC Initiated shutdown cpu_power_off cpu=3
  89. [ 23.289306] PMIC Initiated shutdown cpu_power_off cpu=2
  90. [ 23.289337] PMIC Initiated shutdown cpu_power_off cpu=1
  91. [ 23.309204] Powering off the SoC
  92. [ 23.312408] Calling scm to disable arbiter
  93. [ 23.316467] SCM returned even when asked to busy loop rc=-4
  94. [ 23.322052] waiting on pmic to shut msm down
  95.  
  96. 1 Corrected bytes, 0 unrecoverable blocks
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement