#include <OneWire.h>
#include <DallasTemperature.h>
#include <Wire.h>
#include <BMP085.h>
#include <DHT.h>
#include <DS1307.h>
#include <EEPROM.h>
#include <SPI.h>
#include <nRF24L01.h>
#include <RF24.h>

#define CE_PIN   9
#define CSN_PIN 10
#define ONE_WIRE_BUS 4

OneWire oneWire(ONE_WIRE_BUS);

DallasTemperature sensors(&oneWire);

DeviceAddress Thermometer1 = {
  0x28, 0x00, 0x54, 0xB6, 0x04, 0x00, 0x00, 0x92
};
DeviceAddress Thermometer3 = {
  0x28, 0x94, 0xAC, 0xDF, 0x02, 0x00, 0x00, 0xB5
};

BMP085 dps = BMP085();
long Temperature = 0, Pressure = 0, Altitude = 0;

DHT dht(8, DHT11);

char incomingByte;

int x = 0;

const uint64_t pipe = 0xE8E8F0F0E1LL;
RF24 radio(CE_PIN, CSN_PIN);
int pack[7] = {0, 0, 0, 0, 0, 0, 0};

void setup() {
  sensors.begin();
  sensors.setResolution(Thermometer1, 10);
  sensors.setResolution(Thermometer3, 10);

  Wire.begin();
  dps.init(MODE_ULTRA_HIGHRES, 21000, true);
  dht.begin();

  Serial.begin(9600);
  radio.begin();
  radio.openWritingPipe(pipe);
}

float getTemp(DeviceAddress deviceAddress) {
  float tempC = sensors.getTempC(deviceAddress);
  Serial.println(tempC, 1);
  return tempC;
}

void loop() {

  sensors.requestTemperatures();

  dps.getPressure(&Pressure);
  int h = dht.readHumidity();
  //float t = dht.readTemperature();

  delay(100);
  pack[0] = getTemp(Thermometer1);
  pack[1] = getTemp(Thermometer3);
  pack[2] = Pressure / 133.3;
  pack[3] = h;

  radio.write( pack, sizeof(pack) );

  delay(2000);
}