Advertisement
fuxoft

Muj SSD

Mar 30th, 2017
425
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.87 KB | None | 0 0
  1. fuxoft@frantisek2:~$ sudo smartctl -a /dev/sda
  2. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-71-generic] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: SiliconMotion based SSDs
  7. Device Model: CT250BX100SSD1
  8. Serial Number: 1516F0061036
  9. LU WWN Device Id: 5 00a075 1f0061036
  10. Firmware Version: MU01
  11. User Capacity: 250,059,350,016 bytes [250 GB]
  12. Sector Size: 512 bytes logical/physical
  13. Rotation Rate: Solid State Device
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ACS-2 (minor revision not indicated)
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Thu Mar 30 14:19:49 2017 CEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x02) Offline data collection activity
  26. was completed without error.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 0) seconds.
  33. Offline data collection
  34. capabilities: (0x71) SMART execute Offline immediate.
  35. No Auto Offline data collection support.
  36. Suspend Offline collection upon new
  37. command.
  38. No Offline surface scan supported.
  39. Self-test supported.
  40. Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0002) Does not save SMART data before
  43. entering power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 2) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 10) minutes.
  51. Conveyance self-test routine
  52. recommended polling time: ( 2) minutes.
  53. SCT capabilities: (0x003d) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 1
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
  62. 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
  63. 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 457
  64. 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 36
  65. 160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0
  66. 161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 65
  67. 163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 26
  68. 164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 20881
  69. 165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 32
  70. 166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 1
  71. 167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 18
  72. 168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 2000
  73. 169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 100
  74. 175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
  75. 176 Erase_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 0
  76. 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0
  77. 178 Runtime_Invalid_Blk_Cnt 0x0000 100 100 000 Old_age Offline - 0
  78. 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
  79. 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
  80. 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 20
  81. 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 39
  82. 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 320
  83. 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
  84. 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
  85. 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
  86. 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0
  87. 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
  88. 241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 121739
  89. 242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 18814
  90. 245 Flash_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 167048
  91.  
  92. SMART Error Log not supported
  93.  
  94. SMART Self-test log structure revision number 1
  95. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  96. # 1 Short offline Completed without error 00% 201 -
  97.  
  98. SMART Selective self-test log data structure revision number 1
  99. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  100. 1 0 0 Not_testing
  101. 2 0 0 Not_testing
  102. 3 0 0 Not_testing
  103. 4 0 0 Not_testing
  104. 5 0 0 Not_testing
  105. Selective self-test flags (0x0):
  106. After scanning selected spans, do NOT read-scan remainder of disk.
  107. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement