Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ===========================================================================
- = [JAN.29 1992] [JAN.29 1992] =
- = =
- = =
- = ___ ___ =
- = ___ / / ___ / / =
- = / /_/ /__________ / /__/ /___ ________ ___ =
- = / / \ __/ / / / // // \ \ / _ \ =
- = / __ / /\ \ \ ______ / // // /\_/___/ / / \ \ =
- = / / / / /_/ / / /_____/ / // // / / __/ / /__/ / =
- = / / /__/ \_____/__/ / __/___//__//__/ /_____//______/ =
- = /__/ /__/ =
- = =
- = P R E S E N T S : =
- = ===================== =
- = =
- = T H E B A D B O O K O F B O M B S =
- = =
- = TyPeD By: SINISTER/H.W. =
- = =
- = =
- = =
- ===========================================================================
- ===========================================================================
- = =+=+=+=+==+=+=+= =
- = =! DESCLAIMER != =
- = =+=+=+=+==+=+=+= =
- = =
- = First Let It Be Known That HOT-WIRED Or Any Member Of H.W. Takes =
- = ABSOLUTELY No Responcibility For The Information Provided In This File. =
- = These Experiments Are Not To Be Performed In Any Way,And Is Supplied =
- = Solely For Study And Information Purposes Only! =
- = If You Decide To Ignore This Warning And Choose To Perform Some Or Any =
- = Of These Experiments;You May Be Breaking The Law,As Well As Injuring =
- = Or Endangering Your Life And The Lives Of Others! =
- ===========================================================================
- -=-=-=-=-=-=-=-=-=-
- [1.0] -TABLE OF CONTENTS-
- -=-=-=-=-=-=-=-=-=-
- :SeCtIoN: :FiLe NaMeS:
- ---------------------------------------------------------------------------
- ---------------------------------------------------------------------------
- [1.0].............................TABLE OF CONTENTS
- [1.1].............................SLOW BURNING FUSES
- [1.2].............................FAST BURNING FUSES
- [1.3].............................UNDER WATER IGNITERS
- [1.4].............................DRIED SEED TIMER
- [1.5].............................IGNITER FROM BOOK MATCHES
- [1.6].............................LIGHTBULB BOMB
- [1.7].............................TRAP LIGHT BULB BOMB
- [1.8].............................GERBIL FEED BOMB
- [1.9].............................PIPEBOMBS
- [2.0].............................PIPEBOMBS II
- [2.1].............................PIPEBOMBS III
- [2.2].............................PIPE HAND GRENADE
- [2.3].............................AIROSOL CAN BOMB
- [2.4].............................FERTILIZER EXPLOSIVE
- [2.5].............................FERTILIZER EXPLOSIVE II
- [2.6].............................SODIUM CHLORATE AND SUGAR EXPLOSIVE
- [2.7].............................SOLIDOX BOMB
- [2.8].............................Co2 BOMB
- [2.9].............................PRESSURE EXPLOSIVE
- [3.0].............................LIGHTER BOMB
- [3.1].............................TENNIS BALL BOMB
- [3.2].............................CHEMICAL FIRE BOTTLE BOMB
- [3.3].............................FIREY EXPLOSIVE PEN
- [3.4].............................MERCURY BATTERY BOMB
- [3.5].............................ACETYLENE BALLOON BOMB
- [3.6].............................HIDENBURGE BOMB
- [3.7].............................CARBIDE BOMB
- [3.8].............................NITRO BOMB
- [3.9].............................JUG BAND BOMB
- [4.0].............................MINI GRENADE
- [4.1].............................NAIL GRENADE
- [4.2].............................NITROMETHANE BOMB
- [4.3].............................CIGARETTE LOAD BOMB
- [4.4].............................CARBON-TET-EXPLOSIVE
- [4.5].............................MILK CARTON BOMB
- [4.6].............................PISS BOMB
- [4.7].............................TNT
- [4.8].............................FIRECRACKERS
- [4.9].............................BOOK BOMB
- [5.0].............................DYNAMITE
- [5.1].............................CHEMICAL EQUIVALENCY LIST
- [1.1] -[SLOW BURNING FUSES]-
- -------------------------------
- [2 Inches Per Minute]
- :MATERIALS:
- =============
- -> Cotton String Or 3 Shoelaces
- -> Potassium Nitrate Or Patassium Chlorate
- -> Granulated Sugar
- :PROCEDURE:
- =============
- -> Wash The Cotton String Or Shoelaces In HOT Soapy Water,Then Rinse With
- Fresh Water.
- -> Mix The Following Together In A Glass Bowl:
- -1 Part Potassium Nitrate Or Patassium Chlorate.
- -1 Part Granulated Sugar.
- -2 Parts Hot Water.
- -> Soak The Cotton Strings Or Shoelaces In The Above Solution.
- -> Twist Or Braid 3 Strands Together And Allow Them To Dry.
- -> Then Check The Burn Rate To See Long It Actually Takes.
- [1.2] -[FAST BURNING FUSES]-
- -------------------------------
- [40 Inches Per Minute]
- :MATERIALS:
- =============
- -> Soft Cotton String
- -> Fine Black Powder
- -> Shallow Dish Or Pan
- :PROCEDURE:
- =============
- -> Moisten Powder To A Paste.
- -> Twist Or Braid 3 Strands Of Cotton Together.
- -> Rub Paste Into String And Allow It To Dry.
- -> Once Again,Check The Burn Rate.
- [1.3] -[UNDER WATER IGNITERS]-
- ---------------------------------
- :MATERIALS:
- =============
- -> Pack Of 10 Silicon Diodes (Available At Any Radio Shack.)
- Note:They are very small glass objects.
- -> Pack Of Matches
- -> 1 Candle
- :PROCEDURE:
- =============
- -> Light The Candle And Allow A Pool Of Molten Wax To Form At The Top.
- -> Take A Single Match And Hold The Glass Part Of The Single Diode Against
- The Head.
- -> Bend The Diode Pins Around The Matchhead So That One Wraps In An Upward
- Direction And Then Sticks Out To The Side.
- -> Do The Same With The Other Wire,But In A Downward Direction. The Diodes
- Should Now Be Hugging The Matchhead,But It's Wires MUST NOT TOUCH EACH
- OTHER!
- -> Dip The Matchhead In Wax To Give It A Water-Proof Coat. These Now Work
- Underwater.
- -> Repeat To Make As Many As You Want.
- :HOW TO USE THEM:
- ===================
- -> When They Are Hooked Accross A 6v Battery, The Diode Reaches What Is
- Called Breakdown Voltage,They Usually Produce Great Ammounts Of Heat
- And Light,While Quickly Melting Into A Little Blob. This Heat Is Enough
- To Ignite The Matchhead.
- [1.4] -[DRIED SEED TIMER]-
- -----------------------------
- A Time Delay Device For Electrical Firing Circuits Can Be Made Using The
- Principle Of Expansion Of Dried Seeds.
- :MATERIALS:
- =============
- -> Dried Peas,Beans Or Any Other Dehydrated Seeds.
- -> Wide-Mouth Glass Jar With Non-Metal Cap.
- -> Two Screws Or Bolts.
- -> Thin Metal Plate.
- -> Hand Drill.
- -> Screwdriver
- :PROCEDURE:
- =============
- -> Determine The Rate Of The Rise Of The Dried Seeds Selected. This Is
- Necessary To Determine The Delay Time Of The Timer.
- -> Place A Sample Of The Dried Seeds In The Jar And Cover It With Water.
- -> Measure The Time It Takes For The Seeds To Rise A Given Height. Most
- Dried Seeds Increase 50% I One Or Two Hours.
- -> Cut A Disc From Thin Metal Plate. Disc Should Fit Loosely Inside The
- Jar.
- -> NOTE: If The Metal Is Painted,Rusty Or Otherwise Coated,It Must Be
- Scraped Or Sanded Off,To Obtain A Clean Metal Surface.
- -> Drill Two Holes In The Cap Of The Jar,About 2 Inches Apart,The Diameter
- Of Holes Should Be Such That Screws Or Bolts Will Thread Tighly Into
- Them. If The Jar Has A Metal Cap Or No Cap,A Piece Of Wood Of Plastic
- (Not Metal) Can Be Used As A Cover.
- -> Turn The Two Screws Or Bolts Through The Holes In The Cap. Bolts Should
- Extend About One In. (2 1/2 cm) Into The Jar.
- -> IMPORTANT: Both Bolts Must Extend The Same Distance Below The Container
- Cover.
- -> Pour The Dried Seeds Into The Container. The Level Will Depend Upon The
- Previously Measured Rise Time And The Desired Delay.
- -> Place The Metal Disc In The Jar On Top Of the Seeds.
- :HOW TO USE:
- ==============
- -> Add Just Enough Water To Completely Cover The Seeds And Place The Cap
- On The Jar
- -> Attach Connecting Wires From The Firing Circuit To The Two Screws On the
- Cap.
- -> Expansion Of The Seeds Will Raise The Metal Disc Until It Contacts The
- Screws And Closes The Circuit.
- [1.5] -[IGNITER FROM BOOK MATCHES]-
- --------------------------------------
- This Is A Hot Igniter Made From Paper Book Matches,For Use of Molotov
- Cocktail And Other Incendiaries.
- :MATERIALS:
- =============
- -> Paper Book Matches.
- -> Adhesive Or Friction Tape.
- :PROCEDURE:
- =============
- -> Remove The Staples From The Match Book,And Separate Matches From Cover.
- -> Fold And Tape One Row Of Matches. (Fold In Thirds)
- -> Shape The Cover Into A Tube With Striking Surface On The Inside Of The
- Taped Match Heads. Leave Cover Open At Opposite End For Insertion Of The
- Matches.
- -> Push The Taped Matches Into The Tube Until The Bottom Ends Are Exposed
- About 3/4 In. (2 cm)
- -> Flatten And Fold The Open End Of The Tube So That It Laps Over About 1
- in. (2-1/2 cm);Tape In Place.
- :USE WITH A MOLOTOV COCKTAIL:
- ===============================
- -> Tape The Match End Tab Of The Igniter To The Neck of The Molotov
- Cocktail.
- -> Grasp The Cover And Tab And Pull Sharply Or Quickly To Ignite.
- :GENERAL USE:
- ===============
- -> The Book Match Igniter Can Be Used By Itself To Ignite Flammable Liquids
- Fuse Cords, And Similar Items Requiring Hot Ignition.
- -> CAUTION: Store Matches And Completed Igniters In MoistureProof
- Containers, Such As Rubber Or Plastic Bags Until ready For Use. Damp Or
- Wet Paper Book Matches Will Not Ignite.
- -=-=-=--=-=-=-=-
- [1.6] -LIGHTBULB BOMB-
- -=-=-=--=-=-=-=-
- :MATERIALS:
- =============
- -> 100 Watt Light Bulb.
- -> 50 ml Of Unleaded Gasoline.
- -> Power Drill
- -> Very Small Drill Bit.
- -> Hypdermic Needle (un-used)
- -> Soldering Iron And Solder.
- :PROCEDURE:
- =============
- -> Take Your Light Bulb And Look At The Part That Screws Into The Socket.
- -> Find The Little Blob Of Solder On The Bottom.
- -> Now Grab Your Power Drill,And Drill A Tiny Little Hole Into The Bottom
- Of The Light Bulb Where The Solder Is. Make Sure You Don't Damage The
- Filliments Inside The Bulb,Or It Won't Work!
- -> Take Your Hypo And Fill It With The Gas. Insert It Into The Little Hole
- In The Light Bulb And Continue This Until The Bulb Is Completely Full Of
- Gas. (Should Weigh About 1 Pound.)
- -> Wipe Off The Bulb Really Good,And Set It Somewhere To Dry The Outside In
- Case Some Was Spilled.
- -> After It Is Dry, (This Is The Dangerous Part) Take Your Soldering Iron
- And Hold It Above The Hole In The Light Bulb.
- -> Touch A Lenth Of Solder To The Iron And Let One Small Drop Fall Onto The
- Hole, Sealing It Up.
- :USE:
- =======
- -> Now Just Switch the Bulb With Your Enemies. One Of Them..Or All!
- -> Leave His/Her Place, And Let Time Take It's Place.
- -> NOTE: This Bomb Works With Either Upside Down Fixtures Such As Ceiling
- Lights, Or In The Upright Position, Such As Table Lamps Or Fixtures With
- The Socket At The Bottom.
- :CONCLUSION:
- ==============
- -> When The Light Switch Is Flipped, The Electricity Flowing Through The
- Bulb's Filaments Shorts Out And Sparks, Therefor Causing A Minor
- Explosion. If You're Lucky, the Guy Is Standing Close To The Light And
- Gets Shards Of Glass, Splashes Of Gas, And Fire In His Face. Maybe....
- ...Just Maybe, It Might Burn Down His House!
- -> Hopefully He/She Doesn't Have A "CLAP ON...CLAP OFF" Switch! heh...Cause
- You'll Probely Miss Your Enemy All Together!
- -=-=-=-=-=-=-=-=-=-=-=-
- [1.7] -TRAP LIGHT BULB BOMBS-
- -=-=-=-=-=-=-=-=-=-=-=-
- This Is Basically The Same As The Light Bulb Bomb Above, Except A Couple
- Diffrent Things. Might As Well, Include Both. Choose For Yourself Which One
- Is Better? "I'd Go With The First One."
- :MATERIALS:
- =============
- -> 100 Watt Lighbulb.
- -> A Small, But Powerful Torch.
- -> 25 ml Of Gasoline.
- -> A Tube Of Epoxy Glue.
- -> Liquid Soap.
- :PROCEDURE:
- =============
- -> Place A Hole In The Lightbulb. (See Below)
- *
- ---
- [ ]
- [ ]
- *[ ]*
- [ ]
- [ ]
- [ ]
- [---]
- -> *- Mark Where Hole May Be Placed.
- -> Carefully Poor Some Gasoline Through The Hole. (1/2 Of The Bulb)
- -> Then Pour Some Liquid Soap In The Hole. (1/2 Of The Bulb)
- -> Cover The Hole With Your Epoxy Glue And Let Dry.
- -> Make Sure The Switch Is Off, And Screw In The Light Bulb (DUH!)
- -=-=-=-==-=-=-=-=-
- [1.8] -GERBIL FEED BOMB-
- -=-=-=-==-=-=-=-=-
- :MATERIALS:
- =============
- -> Some Gerbil Feed/Food. Or Some Other Type Of Small Rodent Food.
- -> Hammer.
- -> Some Kind Of Bag, Plastic, Paper...ect.
- -> Model Glue.
- -> Glass Jar. (Peanut Butter Or Jam Jar)
- -> Gasoline.
- -> A Fuse. (Your Choice!)
- :PROCEDURE:
- =============
- -> Get Some Gerbil feed, Or Some Other Type Of Rodent Food.
- -> Mash Up The Food Pellets Into Fine Powder. (About The Consistancy Of
- Beach Sand). The Best Way To Do This Is Put The Gerbil Food In A Bag,
- And Smash It,Until It's Made Into Fine Powder.
- -> Put The Powder Into A Jar.
- -> Squirt The Model Glue Evenly Over All Your Fingers,And Stick Your Hand.
- Into The Jar.
- -> Move Your Hand Around,Until The Glue Is Well Mixed With the Powder.
- -> Fill The Rest Of The Jar With Gasoline.
- -> Put A Long Fuse Into The Jar, Or Just Drop A Match Into It.
- -> Last Of All.....Light The Fuse Of Course!
- -=-=-=-=-=-
- [1.9] -PIPEBOMBS-
- -=-=-=-=-=-
- :MATERIALS:
- =============
- -> 8 Inch Section Of PVC Conduit. 1" In Diameter.
- -> 2 Pipe Caps. (That Will Fit The PVC)
- -> Some Sort Of Propellant.
- -> Water-Proof Fuse.
- -> Tube Of Forma-Gasket, Or Some Other Sealant.
- -> Hot Glue Gun.
- -> Power Drill.
- -> Small Drill Bit.
- :PROCEDURE:
- =============
- -> Put One Of The Caps On The PVC,Seal It, And Let It Dry.
- -> Fill The Pipe Halfway Full With Your Propellant.
- -> Hold One End Of The Fuse While Filling The Pipe The Rest Of The Way,
- With the Propellant.
- -> The Pipe Should Now Be Full Of Propellant Up To 1/3 Inch From the Top
- Of The PVC. Fill It The Rest Of The Way With Hot Glue,And Let it Cool.
- -> Drill A Small Hole In The Remaining Pipe Cap,And Put It On The PVC.
- -> Make Sure You've Run The Fuse Through The Small Hole.
- -> Now,Seal The Cap On The Pipe, And Seal The Small Hole Around The Fuse As
- Well.
- -> You Now Have A Working Pipe Bomb,How You Use It,Is Up To You!
- -=-=-==-=-=-=-
- [2.0] -PIPEBOMBS II-
- -=-=-==-=-=-=-
- Here is Yet Another Way Of Making A Pipe Bomb. A Little Diffrent, But
- Having More Than One Recipe Is Better. Go With The One You Think Is More
- Effective,Or That You Understand Better.
- :MATERIALS:
- =============
- -> Steel Pipe, Approx. 1 Foot.
- -> Caps To Go On The End Of The Pipe.
- -> BabyFood Jar. Or Something Very Similar.
- -> Vinegar.
- -> Wielder (Not Mandatory)
- -> Small Rocks.
- -> Baking Soda,Medium Size.(Arm & Hammer)
- :PROCEDURE:
- =============
- -> Go To Your Local Hardware Store, And Pick Up A Piece Of Steel Pipe.
- Aprroximately 1 Foot. You Also Want The Ends Threaded.
- -> Get Caps Also, To Put At The End Of The Pipe.
- -> Get Ahold Of A BabyFood Jar. Make Sure The Jar Will Fit Down The Pipe
- Real Easy.
- -> Fill The Baby Jar With Everyday Venegar. Make Sure The Top Is Screwed On
- Really Tight.
- -> Cap One Of The Pipe With One Of The Caps You Picked Up. If You Know Of
- Someone With A Wielder, Have Him Wield A Bead Around The Threads After
- You Have It Capped.
- -> Put Some Small Rocks Down The End Of The Pipe And Then Slide The Baby
- Food Jar Down Inside So That The Glass End Is Against The Rocks.
- -> Now Empty A Medium Box Of Baking Soda Into The Pipe.
- -> Cap The Other End Of The Pipe,And If You Can Wield It.
- -> When You Go To Blow It Up,Smack the End Of The Pipe. That Sends The Jar
- Inside,This Breaks The Jar, The Vinegar And Baking Soda Now Mix Together
- And Builds Up Pressure.
- -> IMPORTANT: Sometimes It Takes From 1 Minute Up To 5 Minutes To Detonate.
- So Do Not Go Back And Get It, Until You've Waited Long Enough, And You
- Are Sure It's Dead. But It Should Go Of, Almost All The Time.
- -=-=-=-=-=-=-=-
- [2.1] -PIPE BOMB III-
- -=-=-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Explosive Or Propellant.(Fastest Burning Is Best)
- -> 3 Inch Wide And 12 Inch Long Pipe.(Plastic Or Metal)
- -> Fuse Or Wick.
- -> 2 Corks Or Caps.(For The Ends Of The Pipe)
- -> Power Drill.
- -> Small Drill Bit.(The Size Of The Fuse You're Using)
- :PROCEDURE:
- =============
- -> Take Your Power Drill,And Drill A Hole In The Side Of Your Pipe. About
- 1-1/2 Inches Down From The End Of The Pipe.
- -> Cork One End Of The Pipe. Make Sure It's Tight. If Needed,Hammer It In,
- Until It Seems Fastened Tightly.
- -> Pour In Your Propellent Or Explosive, Until It Almost Reaches The Top.
- Make Sure You Can Still,Stick In Your Cork.
- -> Insert Your Fuse,And You're All Done.
- -> Follow The Diagram Below.
- *********
- ********* <---> CORK
- *********
- [OOOOOOO]
- [OOOOOOO]
- [OOOOOOO] <---> EXPLOSIVE OR
- [OOOOOOO] PROPELLENT
- [OOOOOOO]
- [OOOOOO--------+ <---> FUSE
- [OOOOOOO] \
- [OOOOOOO] \_____ <---> HOLE
- [OOOOOOO]
- [OOOOOOO]
- [OOOOOOO]
- *********
- ********* <---> CORK
- *********
- -=-=-=-=-=-=-=-=-=-
- [2.2] -PIPE HAND GRENADE-
- -=-=-=-=-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Iron/Steel Pipe. Threaded Ends, 1-1/2" To 3" Diameter, 3" To 8" Long.
- -> 2 Iron Pipe Caps.
- -> Explosive Or Propellant.
- -> Commercial or Military Blasting Caps. (Not Electric)
- -> Fuse Cord.
- -> Power Drill.
- -> Pliers.
- :PROCEDURE:
- =============
- -> Place Blasting Cap On One End Of The Fuse Cord,And Crimp It With Pliers.
- -> NOTE: To Find Out How Long The Fuse Cord Should be, Check The Time It
- Takes A Known Lenth To Burn. If 12 Inches Burns In 30 Seconds, Then A 6
- Inch Cord Will Ignite The Grenade In 15 Seconds.
- -> Screw Pipe Cap To One End Of the Pipe. Place Fuse Cord With Blasting Cap
- Into The Opposite End So That The Blasting Cap Is near The Center Of The
- Pipe.
- -> NOTE II: If Plastic Explosive Is To Be Used,Fill Pipe BEFORE Inserting
- The Blasting Cap. Push A Round Stick Into The Center Of The Explosive To
- To Make A Hole, And Then Insert The Blasting Cap.
- -> Pour Explosives Or Propellent Into The Pipe A Little At A Time. Tap The
- Base Of The Pipe Frequently To Settle Filler.
- -> Drill A Hole In The Center Of The Unassembled Pipe Caplarge,Enough For
- The Fuse Cord To Pass Through.
- -> Wipe Pipe Threads To Remove Any Filler Material. Slide The Drilled Pipe
- Cap Over The Fuse And Screw Handtight Onto The Pipe.
- -> Now You're Ready To Go!
- -=-=-=-==-=-=-=-=-
- [2.3] -AIROSOL CAN BOMB-
- -=-=-=-==-=-=-=-=-
- :MATERIALS:
- =============
- -> Airosol Can.
- -> Low Order Explosives Or Propellent.
- -> Hack Saw or Can Opener.
- -> Long Wick Or Fuse.
- -> Epoxy Glue.
- -> Laquer (Optional)
- -> Shrapnel (Optional)
- :PROCEDURE:
- =============
- -> Remove Plastic Sprayer From Can,And Open The Can Up With The Saw Or Can
- Opener.
- -> Let The Gas Escape.
- -> Pour The Explosives Or Propellent Into The Can.
- -> Add Shrapnel To Enlarge The Hole. If You Do, Just Get A Nail And Force
- It in, And Epoxy The Can Closed.
- -> You May Want To Coat It With Laquer Which Causes A Loud Explosion.
- -=-=-=-=-=-=-=-=-=-=-=-
- [2.4] -FERTILIZER EXPLOSIVES-
- -=-=-=-=-=-=-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Fertilizer - Containing No Less Than 32% Total Nitrogen.
- -> A 1:1 Mixture Of Oil And Gasoline.
- -> 16 oz Glass Bottle.
- :PROCEDURE:
- =============
- -> Crush The Fertilizer Into A Flour Like Substance.
- -> Mix 32 Parts Fertilizer To 1 Part Oil/Gas Mixture While Stiring
- Vigoursly.
- -> Spoon Mixture Into 16 oz Glass Bottle.
- -> Insert Blasting Cap,Just Below The Surface Of The Fertilizer Explosive.
- -> Ignite When Ready.
- -=-=-=-=-=-=-=-=-=-=-=-=-
- [2.5] -FERTILIZER EXPLOSIVE II-
- -=-=-=-=-=-=-=-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Fertilizer With No Less Than 32% Total Nitrogen.
- -> Fine Aluminum Bronzing Powder. (Available At Paint Stores)
- -> 16 oz Glass Bottle.
- :PROCEDURE:
- =============
- -> Grind The Fertilizer Into A Fine Flour Like Substance.
- -> Mix 4 Parts Fertilizer To 1 Part Bronzing Powder.
- -> Spoon Mixture Into Glass Bottle.
- -> Insert Blasting Cap,Just Below The Surface Of The Fertilizer Explosive.
- -> Store In An Air-Tight Container Untile Ready To Use.
- -> Ignite When Ready.
- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
- [2.6] -SODIUM CHLORATE & SUGAR EXPLOSIVE-
- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Sodium Chlorate
- -> Granular Sugar
- -> Steel Pipe, Threaded At One End.
- -> 1 End Cap. (To Fit At The End Of The Pipe)
- :PROCEDURE:
- =============
- -> Mix 3 Parts Sodium Chlorate To 2 Parts Sugar.
- -> Screw On The End Cap Onto One Of The Threaded Ends.
- -> Pour The Mixyure Into The Pipe.
- -> Insert The Blasting Cap,Just Below The Surface Of The Fertilizer
- Explosive.
- -> Ignite When Ready.
- -=-=-=-=-=-=-=-
- [2.7] -SOLIDOX BOMBS-
- -=-=-=-=-=-=-=-
- Solidox Comes In An Aluminum Can Containing 6 Grey Sticks. This Can Be
- Bought At Almost Any Hardware Store.
- Solidox Is Used In Wielding Applications As An Oxidizing Agent For The Hot
- Flame Needed To Melt The Metal. The Most Active Ingrediant In Solidox Is
- Potassium Chlorate,A Filler Used In Many Military Applications In The WWII
- Era. Since Solidox Is Literally What The Name Says: SOLID OXygen, You Must
- Have An Energy Source For An Explosion.
- The Most Common And Readily Available Energy Source Is Common Household
- Sugar,Or Sucrose. In Theory,Glucose Would Be The Purest Energy Source, But
- It Is Hard To Find A Solid Supply Of It.
- :MATERIALS:
- =============
- -> 6 Sticks Of SOLIDOX (Comes All In One Pack)
- -> Mortar Or Pestle
- -> Balance
- :PROCEDURE:
- =============
- -> Open The Can Of Solidox, And Remove All 6 Sticks.
- -> One By One, Gring Each Of Them Up.(Preferably With A Mortar Or Pestle)
- Into The Finest Powder Possible.
- -> The Ratio For Mixing The Sugar With The Solidox Is 1:1, So Weigh The
- Solidox Powder,And Grind Up The Equivalent Amount Of Sugar.
- -> Mix Equivalent Amounts Of Solidox Powder,And Sugar In A 1:1 Ratio.
- -> You Now Have An Extremely Powerful Substance That Can Be Used In A
- Variety Of Applications.
- -=-=-=-=-=-
- [2.8] -Co2 BOMBS-
- -=-=-=-=-=-
- :MATERIALS:
- =============
- -> Co2 Cartrage (Must Be Used Up)
- -> Black Powder
- -> A Nail
- -> Fuse
- :PROCEDURE:
- =============
- -> First You Need A Co2 Cartrage That Is Used Up.
- -> With A Nail,Force A Hole Bigger Than It Already Is, To Allow The Black
- Powder And Your Wick To Fit In Easily.
- -> Fill The Cartrige With Black Powder,And Pack It Really Well. (Try
- Taping It On A Hard Surface)
- -> Insert Your Fuse. (Water-Proof Fuse Works Best.)
- -> And You're All Ready To Go!
- -=-=-=-=-==-=-=-=-=-
- [2.9] -PRESSURE EXPLOSIVE-
- -=-=-=-=-==-=-=-=-=-
- Pressure Makes A Neat Explosion If It Is Done Right!
- :MATERIALS:
- =============
- -> Large 750ml Pop Bottle.(Bigger The Better!)
- -> 200gm's Of Baking Soda.
- -> Vinegar
- :PROCEDURE:
- =============
- -> Get Your 750ml Pop Bottle, Or Any Other Size,And Fill It Up Halfway
- With Vinegar.
- -> Then Pour About 200gm's Of Baking Soda In The Bottle And CAP it!
- -> Put It Down And Run.
- -> It Should Blow Up From The Pressure Built Up.
- -> This Is What You Call A "Sissy Bomb."
- -=-=-==-=-=-=-
- [3.0] -LIGHTER BOMB-
- -=-=-==-=-=-=-
- :MATERIALS:
- =============
- -> 4 Lighters.
- -> Lighter Fluid, Or Solvent.
- -> Scotch Tape,Or Any Other Kind Will Do.
- :PROCEDURE:
- =============
- -> Take Your 4 Lighters,Combine Them Side By Side.
- -> Then Tape Them All Together.
- -> Squirt Lighter Fluid Or Your Solvent All Over Them.
- -> When Ready Light It,And Stand Back.
- -> This May Or May Not Work. A Few Things Could Happen.
- -> But I'll Let You Find Out For Your Self!
- -=-=-=-==-=-=-=-=-
- [3.1] -TENNIS BALL BOMB-
- -=-=-=-==-=-=-=-=-
- :MATERIALS:
- =============
- -> Tennis Ball.
- -> Fast Burning Powder.
- -> Major Amounts Of Match Heads.
- -> Knife Or A Power Drill.
- -> Some Kind Of Sealent.
- :PROCEDURE:
- =============
- -> Take Your Tennis Ball And Drill Or Cut A Fairly Big Size Hole Into It.
- This Is To Fit The Match Heads And The Powder In The Ball.
- -> Mix Your Powder And The Match Heads Together.
- -> Put Your Mixture Into The Ball,Until The Ball Is Holding All It Can
- Hold. You Want It Packed Very Tightly. So Fit As Much In As Possible!
- -> When Done,Seal The Hole With Your Sealent.
- -> Wait For The Sealent To Dry.
- -> Throw The Ball As Hard As You Can Against A Hard Surface.
- -=-=-=-=-=-=-=-=-=-=-=-=-=-
- [3.2] -CHEMICAL FIRE BOTTLE BOMB-
- -=-=-=-=-=-=-=-=-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Sulphuric Acid.(Battery Acid)
- -> Gasoline.
- -> Potassium Chlorate.
- -> Sugar.
- -> Glass Bottle w/Stopper (Roughly 1 Quart Size)
- -> Small Bottle Or Jar w/Lid.
- -> Rag Or Absorbant Paper.(Newspaper,Paper Towels,ect)
- -> String Or Rubber Bands.
- :PROCEDURE:
- =============
- -> Sulphuric Acid Must Be Concentrated. If Battery Acid Or Any Other Dilute
- Acid Is Used,Concentrate It By Boiling Until Dense White Fumes Are Given
- Off. Container Should Be Of Eenamelware Or Oven Glass.
- -> CAUTION: Sulphuric Acid Will Burn Skin And Destroy Clothing. If Any Is
- Spilled,Wash It Away With A Large Quantity Of Water. Fumes Are Also
- Dangerous And Should Not Be Inhaled.
- -> Remove The Acid From Heat And Allow It To Cool To Room Temparature.
- -> Pour Gasoline Into The Large (1 Quart) Bottle Until it Is Approximately
- 2/3's Full.
- -> Add Concentrated Sulphuric Acid To The Gasoline Slowly Until The Bottle
- Is Filled To Within 1" To 2" From The Top.
- -> Place The Stopper On The Bottle.
- -> Wash The Outside Of The Bottle Throughly With Clear Water.
- -> CAUTION: If This Is Not Done,The Fire Bottle Bomb May Be Dangerous To
- Handle During Use.
- -> Wrap A Clean Cloth Or Several Sheets Of Paper Towel Around The Outside
- Of The Bottle. Tie With String Or Fasten With Rubber Bands.
- -> Dissolve 1/2 Cup (100 gm) Of Potassium Chlorate And 1/2 Cup Of Sugar In
- One Cup (250 cc) Of Boiling Water.
- -> Allow The Solution To Cool,Pour Into The Small Bottle And Cap Tightly.
- The Cooled Solution Should Be Approx. 2/3 Crystals and 1/3 Liquid. If
- There Is More Liquid Than This,Pour Off Excess Before Using.
- -> CAUTION: Store This Bottle Separately From The Other Bottle.
- :HOW TO USE:
- ==============
- -> Shake The Small Bottle To Mix Contents And Pour Onto The Cloth Or Paper
- Around The Large Bottle.
- -> The Bottle Can Be Used Wet Or After The Solution Has Dried. However,When
- Dry,The Sugar - Potassium Chlorate Mixture Is Very Sensitive To Sparks
- Or Flame And Should Be Used Accordingly.
- -> Throw Or Launch The Bottle. When The Bottle Breaks Against A Hard
- Surface,The Fuel Will Ignite.
- -=-=-=-=-=-=-=-=-=-=-
- [3.3] -FIREY EXPLOSIVE PEN-
- -=-=-=-=-=-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Ball Point "Click" Pen.
- -> Gun Powder.
- -> Match Stick.
- -> Little Sheet Of Sand Paper (1 1/2" x 2)
- :PROCEDURE:
- =============
- -> Unscrew The Pen And Remove All Parts Except Leave The Button At The Top
- Of The Pen.
- -> Stick The Match Stick Up Towards The Clicker, The Match Head Is Facing
- Downwards, Toward The Bottom Of The Pen.
- -> Roll The Sand Paper Up And Put It Around The Match Head.
- -> Put A Small Piece Of Paper Or Something At The End Of The Pen, To Block
- Any Of The Gun Powder From Leaking Out.
- -> Fill The End Piece Of The Pen With Gun Powder.
- -> Your Finished Product Should Look Like This.
- MATCH & SAND PAPER
- SMALL PAPER CLOG :
- \ GUN :
- \ POWDER! :
- \ _______:___________:_______
- <_________________|_________|==:
- END TOP
- PIECE PIECE
- -=-=-=-=-==-=-=-=-=-=-
- [3.4] -MERCURY BATTERY BOMB-
- -=-=-=-=-==-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Mercury Battery.(1.5 or 1.4 V)
- -> Working Lamp With On/Off Switch.
- :PROCEDURE:
- =============
- -> Check To See If Your Lamp Is Working.
- -> If So,Leave The Switch On,And Unplug The Lamp.
- -> Unscrew The Bulb.
- -> Place The Mercury Battery In The Socket And Make Sure That It Is
- Touching The Hot-Spot Contact.
- -> Move Away Any Objects Or Furniture. Or Even Better, Who Cares! Try It At
- A Friends Place.
- -> Now Stand Back And Plu The Cord Back in.
- -> Now Who In There Right Minds Would Try This At Home?
- -=-=-=-=-=-==-=-=-=-=-=-
- [3.5] -ACETYLENE BALLOON BOMB-
- -=-=-=-=-=-==-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Large Balloon.
- -> Acetylene
- -> Oxygen
- :PROCEDURE:
- =============
- -> Get Your Large Balloon.
- -> Fill It Up With 50% Of Acetylene And 50% Of Oxygen.(Propane Will Work,
- But It Has A Less Of A Boom)
- -> Knot The End Of The Balloon And Tie A Fuse Of Some Sort To The Knotted
- End.
- -> Light The Fuse, And Get Away!
- -> NOTE: Do Not Use Any Sort Of Gasoline Fuse.(Gasoline Soaked String)
- Since It'll Melt The Balloon.
- -=-=-=-=-=-=-=-=-
- [3.6] -HINDENBURG BOMB-
- -=-=-=-=-=-=-=-=-
- This Bomb,Is Alot Like The Above,THE ACETYLENE BALLOON BOMB. Just A Few
- Diffent Methods Of Making It.
- :METERIALS:
- =============
- -> Baloon.
- -> Bottle.
- -> Liquid Plumber.
- -> Piece Of Aluminum Foil.
- -> A Long Fuse.
- :PROCEDURE:
- =============
- -> Fill The Bottle 3/4 Full With Liquid Plumber And Add A Little Piece Of
- Aluminum Foil To It.
- -> Put The Balloon Over The Neck Of The Bottle,Until The Balloon Is Full Of
- The Resulting Gas. This Is Highly Flammable Hydrogen.
- -> Now,Tie A Knot In The Balloon.
- -> Light The Fuse,And Let It Rise.
- -=-=-==-=-=-=-
- [3.7] -CARBIDE BOMB-
- -=-=-==-=-=-=-
- :MATERIALS:
- =============
- -> Cacium Carbide.
- -> Tin Coke Can.
- -> Rubber Cement.
- -> Water.
- -> Medium Sized test Tube.(That Will Fit In The Can)
- -> Cork(Wider Than The Mouth Of The Can)
- -> Sharp Knife.
- :PROCEDURE:
- =============
- -> Put The Calcium Carbide In The Tin Coke Can,Filling It 1/4 Of the Way.
- -> Now Fill The Test Tube With Water And Place It Inside Of The Can.
- -> Take The Cork And Fit It In The Test Tube.
- -> Use The Knife To Wittle It Down To Size.
- -> Once The Cork Is In Place.Seal The Top Of The Can With Ruber Cement.
- -> To Ignite This Bomb,All You Have To Do Is Throw It. When The Test Tube
- Breaks,A Very Big Boom Will Be Formed.
- -=-=-==-=-=-
- [3.8] -NITRO BOMB-
- -=-=-==-=-=-
- :MATERIALS:
- =============
- -> Nitric Acid.
- -> Glycerin.
- -> Sulfuric Acid.
- :PROCEDURE:
- =============
- -> Make The Following Solution.
- -> 65% Nitric Acid.
- -> 20% Glycerin.
- -> 15% Sulfuric Acid.
- -> This Should Explode By Heat,Impact,Or By Fuse.
- -=-=-=-=-=-=-=-
- [3.9] -JUG BAND BOMB-
- -=-=-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Glass Jug About 1 Gallon.
- -> Gasoline.
- -> Potassium Permanganate.
- :PROCEDURE:
- =============
- -> First,Make Sure The Jug Is Absolutely Dry, And Also Clean.
- -> Now, Take A Few Drops of Gasoline And Put It In The Jug. Swish It
- Around,Until All The Areas Of The Jug Have Been Coated.
- -> If There Is Any Excess Gasoline,Which There Shouldn't Be,Get Rid Of It.
- -> Do The Same With The Potassium Permanganate In The Same Jug.
- -> Now Cap Or Cork The Jug,And Through It Forcibly Against A Hard Surface.
- Any Surface Will Do, As Long As The Bottle Will Break.
- -=-=-==-=-=-=-
- [4.0] -MINI GRENADE-
- -=-=-==-=-=-=-
- :MATERIALS:
- =============
- -> 2 Bolts.
- -> 1 Nut.
- -> 4 Packs Matches.
- :PROCEDURE:
- =============
- -> Scrape The Tips Off The Matches.
- -> Screw The Nut Onto The First Bolt. Less Than Half Way,So That There Is
- Space To Put The Matches In.
- -> Place The Match Tips In The Space That You Made.
- -> Now Screw The Second Bolt Onto The Nut,Now Trapping The Match Tips
- Between Both Bolts.
- -> The Device Explodes On Impact,With A Small Explosion.
- -=-=-==-=-=-=-
- [4.1] -NAIL GRENADE-
- -=-=-==-=-=-=-
- :MATERIALS:
- =============
- -> Block Of TNT Or Other Explosive.
- -> Nails.
- -> Non-Electric Blasting Cap.(Military Or Improvised)
- -> Fuse Cord.
- -> Tape,Or String,Wire,Or Glue.
- :PROCEDURE:
- =============
- -> If An Explosive Other Than TNT Is Used. Make A Hole In The Center Of The
- Charge For Inserting The Blasting Cap.
- -> TNT Can Be Drilled With Relative Safety.
- -> With Plastic Explosives,A Hole Can Be Made By Pressing A Round Stick Or
- Object Into The Center Of The Charge.
- -> The Hole Should Be Deep Enough That The Blasting Cap Is Totally Within
- The Explosive.
- -> Tape,Tie Or Glue One Or Two Rows Of Closely Packed Nails To The Side Of
- The Explosive Block.
- -> Nails Should Completely Cover The Four Surfaces Of The Block.
- -> Place The Blasting Cap On One End Of The Fuse Cord And Crimp With Pliers
- -> Insert The Blasting Cap In The Hole In The Block Of Explosive.
- -> Tape, Or Tie Fuse Cord Securely In Place So That It Will Not Fall Out
- When The Grenade Is Thrown.
- -> NOTE: To Find Out How Long The Fuse Should Be,Check The Time It Takes A
- Known Lenth To Burn.
- -> If 12 Inches (30 cm) Burns In 30 Seconds,A 10 Second Delay Will Require
- A 4 Inch (10 cm) Fuse.
- :ALTERNATE USE:
- =================
- -> An Effective Directional Anti-Personnel Mine Can Be Made By Placing
- Nails On Only One Side Of The Explosive Block.
- -> For This Case,An Electric Blasting Cap May Be Used.
- -=-=-=-=-=-=-=-=-=-
- [4.2] -NITROMETHANE BOMB-
- -=-=-=-=-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Nitromethane.
- -> Ammonia.(Non Detergent)
- -> Blasting Cap Or Compound Detonator.
- :PROCEDURE:
- =============
- -> Pour 5% Or 6% Ammonia Into The Nitromethane.(1/2 Pint Of Ammoni Will
- Work With One Gallon Of Nitromethane.)
- -> Place The Nitro Mixture Into A Bottle.
- -> Now Place A Cork With A Hole In It,Into The Bottle.
- -> Put Your Detonator In The Hole So It Touches The Mixture.
- -> CAUTION: This Mixture Is 22-24% More Powerful Than TNT. Use Extreme
- Caution. Detonate Only By Remote Control Or With A Trustworthy Timer.
- -> NOTE: To Increase The Power Of This Mixture,Place It In A More Confined
- Container.(ie. A Metal Pipe With Caps.)
- -=-=-=-=-=-=-=-=-=-=-
- [4.3] -CIGARETTE LOAD BOMB-
- -=-=-=-=-=-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Sodium Azide.
- -> Lead Nitrate.
- -> Blasa Wood Slivers.(Approx. 3/8" To 1/2" By 1/8" To 1/4")
- -> Filter Paper.
- -> Distilled Water.
- -> Gum Arabic Glue.
- :PROCEDURE:
- =============
- -> Dissolve About 1 Gram Of Sodium Azide In Distilled Water. Don't Use More
- Water Than You Need.
- -> Then Dissolve About 3 Grams Of Lead Nitrate In Water,Again Don't Use
- More Than You Need.
- -> Slowly Pour The Lead Nitrate Solution Into The Sodium Azide Solution,
- Stirring As You Pour.
- -> A White Substance Will Settle At The Bottom.
- -> Pour Out The Water,And Filter The White Stuff (Lead Azide) With
- Distilled Water Several Times.
- -> Remember,The Filter Paper Has Enough Lead Azide On It To Make It
- Explosive.
- -> You Should Store What You Don't Need Wet,To Keep It From Accidently
- Detonating.
- -> Mix Enough Gum Arabic Glue To Make The Stuff Stick,Then Dip The Balsa
- Wood In It.
- -> Leave Them Dry For About A Day,Then Test One Out.
- -> You Should Stick It In So The End Of The Sliver Is Just Barely Visible.
- -> When The Cigarette Is Lit,The Paper At The End Should Be Shreadded.
- -> If You Put It In Right,The Victim Has Just Enough Time To Take A Drag
- Before It Explodes.
- -=-=-=-=-==-=-=-=-=-=-
- [4.4] -CARBON-TET EXPLOSIVE-
- -=-=-=-=-==-=-=-=-=-=-
- :MATERIALS:
- =============
- -> Fine Aluminum Bronzing Powder.
- -> Carbon Tetrachloride Or
- Tetrachloroethylene.
- -> Stiring Rod.(Wood)
- -> Mixing Container.(Bowl,Bucket,ect)
- -> Measuring Container.(Cup,Tablespoon,ect)
- -> Storage Container.(Jar,Can,ect)
- -> Blasting Cap
- -> Pipe,Can Or Jar.
- :PROCEDURE:
- =============
- -> Measure Out 2 Parts Aluminum Powder To One Part Carbon Tetrachloride Or
- Tetrachlorethylene Liquid Into Mixing Container,Adding Liquid To Powder
- While Stirring With The Wooden Rod.
- -> Stir Until The Mixture Becomes The Consistency Of Honey Syrup.
- -> CAUTION: Fumes From The Liquid Are Dangerous And Should Not Be Inhaled.
- -> Store Explosives In A Jar Or Similar Water Proof Container Until Ready
- To Use. The Liquid In The Mixture Evaporates Quickly When Not Confined.
- -> NOTE: Mixture Will Detonate In This Manner For A Period Of 72 Hours.
- :HOW TO USE:
- ==============
- -> Pour The Mixture Into An Iron Or Steel Pipe,Which Has An End Cap
- Threaded On One End. If A Pipe Is Not Available,You May Use A Dry Tin
- Can Or Glass Jar.
- -> Insert Blastig Cap Just Beneath The Surface Of The Explosive Mix.
- -> NOTE: Confining The Open End Of The Container Will Add To The
- Effectiveness Of The Explosive.
- -=-=-=-==-=-=-=-=-
- [4.5] -MILK CARTON BOMB-
- -=-=-=-==-=-=-=-=-
- :MATERIAL:
- ============
- -> Plastic Milk Carton.
- -> Lighter Fluid.
- -> Piece Of Paper.
- -> Pair Of Chopsticks.(Or Something Similar)
- -> Screw Driver.
- :PROCEDURE:
- =============
- -> After Aquiring All Of The Above,You Can Now Start Your Creation.
- -> First,Puncture A Hole At The Bottom Of The Milk Carton,With A Screw
- Driver,Or Equivalent.
- -> Next Fill One Fourth Of The Milk Carton With Lighter Fluid.
- -> Place The Milk Carton In A Fairly Large Area Outside.
- -> Hold A Piece Of Paper Between The Chopsticks And Light The Paper.
- -> Cautiously Place The Lighted Paper Under The Hole Of The Milk Carton.
- -> Back Away,And Watch!
- -=-=-=-=-=-
- [4.6] -PISS BOMB-
- -=-=-=-=-=-
- :MATERIALS:
- =============
- -> Nitric Acid.
- -> Urine.
- -> Filtering Material.
- (Paper Towel That Is Finely Textured,A T-Shirt,ect)
- -> Aluminum Bronzing Powder.
- -> Heat Source.
- -> Measuring Containers.(Cup,Spoon)
- -> Water.
- -> Tape.
- -> Steel Pipe With End Caps.(One End Pre-Drilled)
- -> Fuse,Or Your Prefreance Of Detonators.
- :PROCEDURE:
- =============
- -> Boil About 10 Cups Of Urine,To Approximately 1/10 Of It's Volume.
- -> Now Filter The Urine.
- -> Pour The Urine Into A Container Through The Filtering Material To
- Remove All Impurities.
- -> Slowly Add 1/3 Cup Of Nitric Acid To The Filtered Urine And Let It
- Stand For,Urea Nitrate Crystals Will Collect On The Paper.
- -> Wash The Urea Nitrate By Pouring Water Over It.
- -> Now Remove The Urea Nitrate Crystals From The Filtering Material,And
- Allow It To Dry Thoroughly (16 Hours).
- :HOW TO USE:
- ==============
- -> Spoon The Crystals Into An Iron Or Steel Pipe With An End Cap On One
- End.
- -> Thread The Fuse Through The Hole Of The Other End Cap.
- -> Then Screw It On.
- -> The Mixture Will Be More Powerful If Mixed In A 1:4 Ratio.(1 Cup
- Crystals.)
- -=-=-=-
- [4.7] -T'N'T-
- -=-=-=-
- :MATERIALS:
- =============
- -> Sulfuric Acid.
- -> Nitric Acid.
- -> Toluene.
- -> 2 Beakers.
- -> Stirring Stick.
- -> Syringe.
- -> Centigrade Thermometer.
- -> Boiling Water.
- -> Cold Water.
- -> Ice Bath.
- :PROCEDURE:
- =============
- -> Take Your 2 Beakers.
- -> Prepare A Solution Of 76% Sulfuric Acid, 23% Nitric Acid,And 1% Water.
- -> In The Other Beaker,Prepare Another Solution Of 57% Nitric Acid And 43%
- Sulfuric Acid.(Percentages Are On A Weight Ratio, Rather Than Volume.)
- -> Pour 10 Grams Of The First Solution Into An Empty Beaker And Then Blaced
- Into An Ice Bath.
- -> Then Add 10 Grams Of Toluene,And Stir For Several Minutes.
- -> Remove The Beaker From The Ice Bath And Gently Heat It,Until It Reaches
- 50 Degrees C.
- -> The Solution Is Being Stirred Constantly While Being Heated.
- -> 50 Additional Grams Of The Acid,From The First Beaker,Are Added And The
- Temparature Is Held For The Next 10 Minutes,And An Oily Liquid Will
- Begin To Form On Top Of The Acid.
- -> After 10 Or 12 Minutes,The Acid Solution Is Returned To The Ice Bath,
- And Cooled To 45 Degrees C.
- -> When Reaching This Temperature,The Oily Liquid Will Sink And Collect At
- The Bottom Of The Beaker.
- -> After This Point,The Remaining Acid Solution Should Be Drawn Off, By
- Using A Syringe.
- -> 50 More Grams Of The First Acid Solution Are Added To The Oily Liquid
- While The Temperature Is SLOWLY Being Raised To 83 Degrees C.
- -> After This Temperature Is Reached,It Is Maintained For A Full Half Hour.
- -> At The End Period,The Solution Is Allowed To Cool To 60 Degrees C. And
- Is Held At This Temperature For Another Full Half Hour.
- -> After This,The Acid Is Again Drawn Off,Leaving Once More Only Oily
- Liquid At The Bottom.
- -> 30 Grams Of Sulfuric Acid Are Added,While The Oily Liquid Is Gently
- Heated To 80 Degrees C.
- -> All Temperature Increases Must Be Accomplished Slowly And Gently!
- -> Once The Desired Temperature Is Reached, 30 Grams Of The Second Acid
- Solution Are Added,And The Temperature Is Raised From 80 Degrees C. To
- 104 Degrees C. And Is Held For Thress Hours.
- -> After The Three Hour Period Is Up,The Mixture Is Lowered To 100 Degrees
- C. And Held Again There For A Half Hour.
- -> After The Half Hour Is Up,The Oil Is Removed,From The Acid And Washed
- With Boiling Water.
- -> After The Washing With The Boiling Water,While Being Stirred Constantly,
- The TNT Will Begin To Solidify.
- -> When The Solidification Has Started,Cold Water Is Added To The Beaker,So
- That The TNT Will Form Into Pellets.
- -> Once This Is Done,You Have A Good Quality TNT.
- -> NOTE!: The Temparatures Used In The Preparation Of TNT Are EXACT, And
- Must Be Used As Such. DO NOT Estimate Or Use Approximations! Buy A Good
- Centigrade Thermometer.
- -=-=-==-=-=-=-
- [4.8] -FIRECRACKERS-
- -=-=-==-=-=-=-
- :MATERIALS:
- =============
- -> Cardboard Tubing.
- -> Epoxy Or Other Kind Of Sealent.
- -> Black Powder,Or Any Other Flame Sensitive Explosive.
- -> Knife Or Screwdriver.
- -> Tissue Paper Or Pencil.
- -> Wax Paper.
- :PROCEDURE:
- =============
- -> Cut A Small Piece Of The Cardboard Tubing,From The Tube You Are Using.
- Anything Less Than 4 Times The Diameter Of The Tube.
- -> Put The Tubing On A Piece Of Wax Paper,And Fill The Tube To A Height Of
- 3/4 The Diameter Of The Tubing With The Epoxy Or Other Sealent.
- -> Allow The Epoxy To Fully Dry.
- -> When It's Dry,Cut Or Make A Hole In The Middle Of The Tube With Your
- Screwdriver.
- -> Insert A Desired Lenth Of Fuse.
- -> Now Fill The Tube With Your Explosive,Almost To The Top.
- -> Pack The Explosive Tightly In The Tube With Tissue Paper,And With A
- Pencil,Or Anything Else Similar.
- -> Be Sure To Leave More Room,For The Epoxy.
- -> Fill The Rest Of The Tube With The Epoxy,And Allow It To Dry.
- -=-=-=-=-=-
- [4.9] -BOOK BOMB-
- -=-=-=-=-=-
- :MATERIALS:
- =============
- -> Large Book.(Encyclopedia,Dictionary ect)
- -> Water Soluble Glue.
- -> Large Bucket.
- -> Boiling Water.
- -> Power Drill.
- -> Jig Saw.
- -> Your Bomb.
- -> A Vice.
- :PROCEDURE:
- =============
- -> First Of All, The Book Pages Must Be All Glued Together.
- -> This Can Be Done By Pouring An Entire Container Of Water Soluble Glue,
- Into The Bucket.
- -> Now Filling The Bucket Wit Boiling Water.
- -> A Glue-Water Solution Will Be Formed,That Will Now Glue All The Pages
- Of The Book Together.
- -> After It Has Cooled Down To A Resonable Temperature, And The Solution
- Has Been Stirred Well,Soak The Pages Into The Solution.
- -> Make Sure You Don't Glue The Book Cover,Just The Pages!
- -> After You Have Glued All The Pages,Check To See That Every Page Has Been
- Properly Soaked.
- -> Suspend The Book,By Both Covers, And Clamp All The Pages In A Vice.
- -> When The Pages Are Dry,Drill A Hole In The Book Pages,With Your Hand
- Drill.
- -> After You Drilled The Hole In The Pages,Take Your Jig Saw And Cur A Big
- Rectangle In The Middle Of The Book,To Fit Your Bomb Into It.
- -> Now You Will Be Left With Just The Shell Of The Book's Pages.
- -> When The Pages Have Been Cut Out,The Book Should Look Like This...
- _______________________
- | ___________________ |
- | | | |
- | | | |
- | | | |
- | | E | |
- | | M | |
- | | P | |
- | | T | |
- | | Y | |
- | | | |
- | | | |
- | |_________________| |
- |_____________________|
- [BOOK COVERS NOT SHOWN]
- -> The Book Pages Now Have To Be Securely Glued To The Back Cover.
- -> After Building Your Bomb,Which Is Usually Some Sort Of Timer Or Radio
- Controlled Bomb.
- -> The Bomb Is Now Placed Inside The Book.
- -> Whatever Type Of Bomb You Have Made,Should Be Packed With Foam,Or Such
- Sort,To Prevent It From Moving And Rolling Around.
- -> After The Timer Is Set,Or The Radio Control Has Been Turned On,The Front
- Cover Is Glued Closed,And The Bomb Is Taken To It's Destination.
- -=-=-==-=-
- [5.0] -DYNAMITE-
- -=-=-==-=-
- Be Sure To Mix These Very Carefully,And To Use The EXACT Ammouts Shown!
- These Percentages Are In Weight Ratio,Not Volume.
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNT:
- ---------------------------------------------------------------------------
- [#1]
- NITROGLYCERIN 32%
- SODIUM NITRATE 28%
- WOODMEAL 10%
- AMMONIUM OXALATE 29%
- GUNCOTTEN 1%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNT:
- ---------------------------------------------------------------------------
- [#2]
- NITROGLYCERIN 24%
- POTASSIUM NITRATE 9%
- SODIUM NITRATE 56%
- WOODMEAL 9%
- AMMONIUM OXALATE 2%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNT:
- ---------------------------------------------------------------------------
- [#3]
- NITROGLYCERIN 35.5%
- POTASSIUM NITRATE 44.5%
- WOODMEAL 6%
- GUNCOTTEN 2.5%
- VASELINE 5.5%
- POWDERED CHARCOAL 6%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#4]
- NITROGLYCERIN 25%
- POTASSIUM NITRATE 26%
- WOODMEAL 34%
- BARIUM NITRATE 5%
- STARCH 10%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#5]
- NITROGLYCERIN 57%
- POTASSIUM NITRATE 19%
- WOODMEAL 9%
- AMMONIUM OXALATE 12%
- GUNCOTTEN 3%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#6]
- NITROGLYCERIN 18%
- SODIUM NITRATE 70%
- WOODMEAL 5.5%
- POTASSIUM CHLORIDE 4.5%
- CHALK 2%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#7]
- NITROGLYCERIN 26%
- WOODMEAL 40%
- BARIUM NITRATE 32%
- SODIUM CARBONATE 2%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#8]
- NITROGLYCERIN 44%
- WOODMEAL 12%
- ANHYDROUS SODIUM SULFATE 44%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#9]
- NITROGLYCERIN 24%
- POTASSIUM NITRATE 32.5%
- WOODMEAL 33.5%
- AMMONIUM OXALATE 10%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#10]
- NITROGLYCERIN 26%
- POTASSIUM NITRATE 33%
- WOODMEAL 41%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#11]
- NITROGLYCERIN 15%
- SODIUM NITRATE 62.9%
- WOODMEAL 21.2%
- SODIUM CARBONATE .9%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#12]
- NITROGLYCERIN 35%
- SODIUM NITRATE 27%
- WOODMEAL 10%
- AMMONIUM OXALATE 1%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#13]
- NITROGLYCERIN 32%
- POTASSIUM NITRATE 27%
- WOODMEAL 10%
- AMMONIUM OXALATE 30%
- GUNCOTTON 1%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#14]
- NITROGLYCERIN 33%
- WOODMEAL 10.3%
- AMMONIUM OXALATE 29%
- GUNCOTTON .7%
- POTASSIUM PERCHLORIDE 27%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#15]
- NITROGLYCERIN 40%
- SODIUM NITRATE 45%
- WOODMEAL 15%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#16]
- NITROGLYCERIN 47%
- STARCH 50%
- GUNCOTTON 3%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#17]
- NITROGLYCERIN 30%
- SODIUM NITRATE 22.3%
- WOODMEAL 40.5%
- POTASSIUM CHLORIDE 7.2%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#18]
- NITROGLYCERIN 50%
- SODIUM NITRATE 32.6%
- WOODMEAL 17%
- AMMONIUM OXALATE .4%
- ---------------------------------------------------------------------------
- :NO.#: :INGREDIANTS: :AMMOUNTS:
- ---------------------------------------------------------------------------
- [#19]
- NITROGLYCERIN 23%
- POTASSIUM NITRATE 27.5%
- WOODMEAL 37%
- AMMONIUM OXALATE 8%
- BARIUM NITRATE 4%
- CALCIUM CARBONATE .5%
- ---------------------------------------------------------------------------
- -=-=-=-=-=-=-=-=-=-=-=-=-=-
- [5.1] -CHEMICAL EQUIVALANCY LIST-
- -=-=-=-=-=-=-=-=-=-=-=-=-=-
- :CHEMICAL: :EQUIVALENCY:
- ---------------------------------------------------------------------------
- ACACIA ......................................................... GUM ARABIC
- ACETIC ACID ....................................................... VINEGAR
- ALUMINUM OXIDE ..................................................... ALUMIA
- ALUMINUM POTASSIUM SULPHATE .......................................... ALUM
- ALUMINUM SULFATE ..................................................... ALUM
- AMMONIUM CARBONATE .............................................. HARTSHORN
- AMMONIUM HYDROXIDE ................................................ AMMONIA
- AMMONIUM NITRATE ............................................... SALT PETER
- AMMONIUM OLEATE .............................................. AMMONIA SOAP
- AMYLACETATE .................................................... BANANA OIL
- BARIUM SULFIDE .................................................. BLACK ASH
- CARBON CARBINATE .................................................... CHALK
- CARBONTETRACHLORIDE ........................................ CLEANING FLUID
- CALCIUM HYPOCHLORIDE ..................................... BLEACHING POWDER
- CALCIUM OXIDE ........................................................ LIME
- CALCIUM SULFATE .......................................... PLASTER OF PARIS
- CARBONIC ACID ..................................................... SELTZER
- CETYLTRIMETHYLAMMONIUMBROMIDE ............................... AMMONIUM SALT
- ETHYLINEDICHLORIDE ............................................ DUTCH FLUID
- FERIC OXIDE ..................................................... IRON RUST
- FURFURALDEHYDE ................................................... BRAN OIL
- GLUCOSE ........................................................ CORN SYRUP
- GRAPHITE ...................................................... PENCIL LEAD
- HYDROCHLORIC ACID ........................................... MURIATIC ACID
- HYDROGEN PEROXIDE ................................................ PEROXIDE
- LEAD ACETATE ................................................ SUGAR OF LEAD
- LEAD TERO-OXIDE .................................................. RED LEAD
- MAGNESIUM SILICATE ................................................... TALC
- MAGNESIUM SULFATE .............................................. EPSOM SALT
- MATHYLSALICYLATE ......................................... WINTER GREEN OIL
- NAPHTHALENE ..................................................... MOTHBALLS
- PHENOL ...................................................... CARBOLIC ACID
- POTASSIUM BICARBONATE ..................................... CREAM OF TARTER
- POTASSIUM CHROMIUM SULFATE ..................................... CHROMEALUM
- POTASSIUM NITRATE .............................................. SALT PETER
- SODIUM OXIDE ......................................................... SAND
- SODIUM BICARBONATE ............................................ BAKING SODA
- SODIUM BORATE ....................................................... BORAX
- SODIUM CARBONATE ............................................. WASHING SODA
- SODIUM CHLORIDE ...................................................... SALT
- SODIUM HYDROXIDE ...................................................... LYE
- SODIUM SILICATE ..................................................... GLASS
- SODIUM SULFATE ............................................. GLAUBER'S SALT
- SODIUM THIOSULFATE .................................... PHOTOGRAPHER'S ACID
- SULFURIC ACID ................................................ BATTERY ACID
- SUCROSE ........................................................ CANE SUGAR
- ZINC CHLORIDE .............................................. TINNER'S FLUID
- ZINC SULFATE ................................................ WHITE VITRIOL
- ===========================================================================
- = =+=+=+=+=+ =
- = =! NOTE != =
- = =+=+=+=+=+ =
- = =
- = HOT-WIRE Takes No Credit For Any Of These Experiments Provided In This =
- = File. We Simply Put Together A Bunch Of Bomb Files Found From Many Text =
- = File BBS' And Re-Typed Them To Create "THE BAD BOOK OF BOMBS". We Also =
- = Added A Couple Other Good Features To This File. I've Tried To Keep The =
- = Spelling Mistakes Down To A Minimum,That's The Best I Could Do. We've =
- = Noticed That The Text File World Has Basically Died,Mostly From Lack Of =
- = Good Text File Writers,Or Any Writers At All. That's Why We (HOT-WIRED) =
- = Have Joined Together As A Group To Write Some Decent Files; Dealing =
- = With All Sorts Of Different Subjects. =
- = Well That Wraps It Up For Now... Until Our Next Text File. = =
- ===========================================================================
- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 1992 HOT-WIRED HOT-WIRED HOT-WIRED HOT-WIRED HOT-WIRED HOT-WIRED 1992
- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- ---------------------------------------------------------------------------
- -=- CALL THESE TEXT FILE BBS' -=-
- ---------------------------------------------------------------------------
- TRAUMA HOUNDS.....................24h/7d.......1200/14400....604-589-1570
- TOMMY'S HOLLIDAY CAMP NODE #1....24h/7d.......2400/9600.....604-361-4549
- TOMMY'S HOLLIDAY CAMP NODE #2....24h/7d.......2400/9600.....604-361-1464
- RIPCO.............................24h/7d.......1200/2400.....312-528-5020
- & THE TEMPLE OF THE SCREAMING.....24h/7d.......1200/2400.....510-935-5845
- ELECTRON
- [SINISTER/HOT-WIRED]'92
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement