MPC-HC + LAV Filters OLD

install all programs and decoders, remember to find a nice place for madVR to be extracted to where it wont get deleted
open MPC-HC check store settings to .ini file
close mpc-hc
copy the .ini to C:\Program Files (x86)\Media Player Classic - Home Cinema\ and overwrite the file that is there

start up MPC-HC and play a file known to have video, audio, and subs	*you can use the sample video provided
click into the files let it seek there then pause
right click the video and go to filters, madVR, LAV video decoder, DirectVovSub, Lav audio decoder, and the files path should be listed
if everything is there your good to start changing the settings

right click the video and go to filters, click DirectVobSub, and click properties
go to colors tab
move YV12 to the top of the preferance order
under dynamic change click YV12 and click change
hit apply the ok at the bottom

right click the video and go to filters, click LAV Audio Decoder
under output formats uncheck both 32bit optins unless your audio card somehow supports it
under options
check expand mono to stereo and expand 6.1 to 7.1
click on at the bottom

if you have a dedicated GPU:
right click the video and go to filters, click madvr, then Edit Settings
click and expand devices then click your device
set the device type
expand your device and set the display mode		*if you  dont know what display mode you should set contact me
click and expand processing
turn of all decoding and deinterlacing
click and expand scaling algorithems
click luma upscaling and set it to spline
click luma downscaling and set it to spline
click and expand rendering and click general setings
check disable desktop composition and uncheck only in fullscreen
hit apply the ok at the bottom then ok and the window that is still on screen
	*if you have problems with preformance its probably because you dont have a powerful enough GPU contact me for help adjusting

if you have a Nvidia GPU capable of CUDA:
right click the video and go to filters, click LAV Video decoder
under hardware acceleration, gardware decoder change to CUVID
under Hardware/GPU deinterlacing makesure the algorithem is set to adaptive and high-quality processing is checked
on the output formats side change RGB output levels to untouched
click on at the bottom
	*depending on your GPU you may not be able to use both madVR and CUVID, if you have problems with preformance contact me for help

You have now completed configuring MPC-HC close the program completely and try playing the provided video, contact me if any problems result.


**NOTE: to change track in files right click, go to files, then the files path, and you should be able to select the sudio video and subs that you want