API tools faq
paste
Advertisement
RobertBerger

phyboard-mir a-imx6-3-6 nfs boot

RobertBerger
Jul 17th, 2022
197
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.06 KB | None | 0 0
raw download clone embed print report
  1. barebox 2021.04.0-bsp-yocto-ampliphy-i.mx6-pd21.1.1 #1 Thu Jul 14 09:03:12 UTC 2022
  2.  
  3.  
  4. Board: PHYTEC phyCORE-i.MX6 Quad with NAND
  5. detected i.MX6 Quad revision 1.5
  6. i.MX reset reason POR (SRSR: 0x00000001)
  7. i.MX6 Quad unique ID: 121821d4ee6ba5b5
  8. mdio_bus: miibus0: probed
  9. eth0: got preset MAC address: 50:2d:f4:16:2d:bd
  10. nand_base: device found, Manufacturer ID: 0xef, Chip ID: 0xd3
  11. nand_base: Winbond W29N08GV
  12. nand_base: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  13. Bad block table found at page 524224, version 0x01
  14. Bad block table found at page 524160, version 0x01
  15. m25p80 flash@00: n25q128a13 (16384 Kbytes)
  16. imx-usb 2184200.usb@2184200.of: USB EHCI 1.00
  17. imx-esdhc 2190000.mmc@2190000.of: registered as mmc0
  18. da9063 da90620: da9062 with id 62.12.ff.1a detected
  19. state: New state registered 'state'
  20. state: Using bucket 0@0x00000000
  21. netconsole: registered as netconsole-1
  22. phySOM-i.MX6: Using environment in MMC
  23. malloc space: 0x2fe7a760 -> 0x4fcf4ebf (size 510.5 MiB)
  24. mmc0: detected SD card version 2.0
  25. mmc0: registered mmc0
  26.  
  27. Hit m for menu or any to stop autoboot: 2
  28. Main menu
  29. 1: Boot default
  30. 2: Detect bootsources
  31. 3: Settings
  32. 4: Save environment
  33. 5: Shell
  34. 6: Reset
  35. boot
  36. 1: mmc
  37. 2: emmc
  38. 3: nand
  39. 4: spi
  40. 5: net
  41. 6: back
  42. Booting entry 'net'
  43. eth0: 1000Mbps full duplex link detected
  44. eth0: 1000Mbps full duplex link detected
  45. T T Found node /soc/bus@2000000
  46.  
  47. Loading ARM Linux zImage '/mnt/nfs/boot/zImage'
  48. Loading devicetree from '/mnt/nfs/boot/zImage-imx6q-phytec-mira-rdk-nand.dtb'
  49. commandline: consoleblank=0 console=ttymxc1,115200n8 ip=192.168.42.11:192.168.42.102:192.168.42.254:255.255.255.0::eth0: root=/dev/nfs nfsroot=192.168.42.102:/opt/poky/mira-rootfs,v3,tcp imxdrm.legacyfb_depth=32 rootwait ro fsck.repair=yes
  50. Starting kernel in secure mode
  51. [ 0.000000] Booting Linux on physical CPU 0x0
  52. [ 0.000000] Linux version 5.19.0-rc6 (oe-user@oe-host) (arm-phytec-linux-gnueabi-gcc (GCC) 10.3.0, GNU ld (GNU Binutils) 2.36.1.20210703) #1 SMP Wed Jul 13 19:08:14 UTC 2022
  53. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  54. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  55. [ 0.000000] OF: fdt: Machine model: PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND
  56. [ 0.000000] Memory policy: Data cache writealloc
  57. [ 0.000000] efi: UEFI not found.
  58. [ 0.000000] cma: Reserved 64 MiB at 0x4b800000
  59. [ 0.000000] Zone ranges:
  60. [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff]
  61. [ 0.000000] Normal empty
  62. [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff]
  63. [ 0.000000] Movable zone start for each node
  64. [ 0.000000] Early memory node ranges
  65. [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff]
  66. [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff]
  67. [ 0.000000] percpu: Embedded 17 pages/cpu s37652 r8192 d23788 u69632
  68. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
  69. [ 0.000000] Kernel command line: consoleblank=0 console=ttymxc1,115200n8 ip=192.168.42.11:192.168.42.102:192.168.42.254:255.255.255.0::eth0: root=/dev/nfs nfsroot=192.168.42.102:/opt/poky/mira-rootfs,v3,tcp imxdrm.legacyfb_depth=32 rootwait ro fsck.repair=yes
  70. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  71. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  72. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  73. [ 0.000000] Memory: 944972K/1048576K available (15360K kernel code, 2490K rwdata, 6008K rodata, 2048K init, 431K bss, 38068K reserved, 65536K cma-reserved, 195592K highmem)
  74. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  75. [ 0.000000] trace event string verifier disabled
  76. [ 0.000000] rcu: Hierarchical RCU implementation.
  77. [ 0.000000] rcu: RCU event tracing is enabled.
  78. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
  79. [ 0.000000] Tracing variant of Tasks RCU enabled.
  80. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  81. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  82. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  83. [ 0.000000] L2C-310 errata 752271 769419 enabled
  84. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  85. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  86. [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
  87. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  88. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  89. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
  90. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  91. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  92. [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  93. [ 0.000034] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  94. [ 0.009133] Console: colour dummy device 80x30
  95. [ 0.009277] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  96. [ 0.009304] pid_max: default: 32768 minimum: 301
  97. [ 0.009717] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  98. [ 0.009764] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  99. [ 0.010948] CPU: Testing write buffer coherency: ok
  100. [ 0.011053] CPU0: Spectre v2: using BPIALL workaround
  101. [ 0.011586] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  102. [ 0.013125] cblist_init_generic: Setting adjustable number of callback queues.
  103. [ 0.013147] cblist_init_generic: Setting shift to 2 and lim to 1.
  104. [ 0.013434] Setting up static identity map for 0x10300000 - 0x103000ac
  105. [ 0.017260] rcu: Hierarchical SRCU implementation.
  106. [ 0.025621] EFI services will not be available.
  107. [ 0.026296] smp: Bringing up secondary CPUs ...
  108. [ 0.027687] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  109. [ 0.027716] CPU1: Spectre v2: using BPIALL workaround
  110. [ 0.029368] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  111. [ 0.029396] CPU2: Spectre v2: using BPIALL workaround
  112. [ 0.030955] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  113. [ 0.030983] CPU3: Spectre v2: using BPIALL workaround
  114. [ 0.031168] smp: Brought up 1 node, 4 CPUs
  115. [ 0.031193] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  116. [ 0.031213] CPU: All CPU(s) started in SVC mode.
  117. [ 0.032177] devtmpfs: initialized
  118. [ 0.048595] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  119. [ 0.048988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  120. [ 0.049027] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  121. [ 0.055261] pinctrl core: initialized pinctrl subsystem
  122. [ 0.058416] DMI not present or invalid.
  123. [ 0.059811] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  124. [ 0.065906] DMA: preallocated 256 KiB pool for atomic coherent allocations
  125. [ 0.071448] thermal_sys: Registered thermal governor 'step_wise'
  126. [ 0.071860] cpuidle: using governor menu
  127. [ 0.072363] CPU identified as i.MX6Q, silicon rev 1.5
  128. [ 0.131279] platform 2400000.ipu: Fixing up cyclic dependency with 120000.hdmi
  129. [ 0.131429] platform 2400000.ipu: Fixing up cyclic dependency with 20e0000.iomuxc-gpr:ipu1_csi0_mux
  130. [ 0.133752] platform 2800000.ipu: Fixing up cyclic dependency with 120000.hdmi
  131. [ 0.133896] platform 2800000.ipu: Fixing up cyclic dependency with 20e0000.iomuxc-gpr:ipu2_csi1_mux
  132. [ 0.149653] No ATAGs?
  133. [ 0.149915] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  134. [ 0.149937] hw-breakpoint: maximum watchpoint size is 4 bytes.
  135. [ 0.156629] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
  136. [ 0.170648] Serial: AMBA PL011 UART driver
  137. [ 0.226701] mxs-dma 110000.dma-apbh: initialized
  138. [ 0.242153] iommu: Default domain type: Translated
  139. [ 0.242169] iommu: DMA domain TLB invalidation policy: strict mode
  140. [ 0.243620] SCSI subsystem initialized
  141. [ 0.244525] usbcore: registered new interface driver usbfs
  142. [ 0.244616] usbcore: registered new interface driver hub
  143. [ 0.244695] usbcore: registered new device driver usb
  144. [ 0.245097] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator
  145. [ 0.245355] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
  146. [ 0.245635] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator
  147. [ 0.245889] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
  148. [ 0.249792] i2c i2c-0: IMX I2C adapter registered
  149. [ 0.251120] i2c i2c-1: IMX I2C adapter registered
  150. [ 0.253778] i2c i2c-2: IMX I2C adapter registered
  151. [ 0.256351] pps_core: LinuxPPS API ver. 1 registered
  152. [ 0.256365] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  153. [ 0.256402] PTP clock support registered
  154. [ 0.256855] EDAC MC: Ver: 3.0.0
  155. [ 0.263354] vgaarb: loaded
  156. [ 2.548399] clocksource: Switched to clocksource mxc_timer1
  157. [ 2.569233] NET: Registered PF_INET protocol family
  158. [ 2.570012] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  159. [ 2.573629] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  160. [ 2.573697] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  161. [ 2.573728] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  162. [ 2.573890] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  163. [ 2.574173] TCP: Hash tables configured (established 8192 bind 8192)
  164. [ 2.574523] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  165. [ 2.574612] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  166. [ 2.574979] NET: Registered PF_UNIX/PF_LOCAL protocol family
  167. [ 2.576111] RPC: Registered named UNIX socket transport module.
  168. [ 2.576130] RPC: Registered udp transport module.
  169. [ 2.576139] RPC: Registered tcp transport module.
  170. [ 2.576147] RPC: Registered tcp NFSv4.1 backchannel transport module.
  171. [ 2.576164] PCI: CLS 0 bytes, default 64
  172. [ 2.577229] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing.
  173. [ 2.628519] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  174. [ 2.632207] Initialise system trusted keyrings
  175. [ 2.632623] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  176. [ 2.644205] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  177. [ 2.645542] NFS: Registering the id_resolver key type
  178. [ 2.645610] Key type id_resolver registered
  179. [ 2.645623] Key type id_legacy registered
  180. [ 2.645807] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  181. [ 2.645822] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  182. [ 2.645880] ntfs: driver 2.1.32 [Flags: R/O].
  183. [ 2.646767] Key type asymmetric registered
  184. [ 2.646782] Asymmetric key parser 'x509' registered
  185. [ 2.647072] bounce: pool size: 64 pages
  186. [ 2.647297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  187. [ 2.647313] io scheduler mq-deadline registered
  188. [ 2.647325] io scheduler kyber registered
  189. [ 2.763630] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
  190. [ 2.763669] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
  191. [ 2.869461] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
  192. [ 2.878877] SuperH (H)SCI(F) driver initialized
  193. [ 2.881030] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 269, base_baud = 5000000) is a IMX
  194. [ 3.760420] printk: console [ttymxc1] enabled
  195. [ 3.767283] msm_serial: driver initialized
  196. [ 3.771440] STMicroelectronics ASC driver initialized
  197. [ 3.779974] STM32 USART driver initialized
  198. [ 3.824310] brd: module loaded
  199. [ 3.840780] loop: module loaded
  200. [ 3.844581] at24 2-0050: supply vcc not found, using dummy regulator
  201. [ 3.852093] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
  202. [ 3.877183] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xd3
  203. [ 3.883619] nand: Winbond W29N08GV
  204. [ 3.887039] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  205. [ 3.895769] Bad block table found at page 524224, version 0x01
  206. [ 3.902034] Bad block table found at page 524160, version 0x01
  207. [ 3.908414] 3 fixed-partitions partitions found on MTD device gpmi-nand
  208. [ 3.915064] Creating 3 MTD partitions on "gpmi-nand":
  209. [ 3.920171] 0x000000000000-0x000001000000 : "barebox"
  210. [ 3.928135] 0x000001000000-0x000001100000 : "barebox-environment"
  211. [ 3.936984] 0x000001100000-0x000040000000 : "root"
  212. [ 3.951239] gpmi-nand 112000.nand-controller: driver registered.
  213. [ 3.974373] CAN device driver interface
  214. [ 3.981026] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  215. [ 3.990294] e1000e: Intel(R) PRO/1000 Network Driver
  216. [ 3.995280] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  217. [ 4.001374] igb: Intel(R) Gigabit Ethernet Network Driver
  218. [ 4.006791] igb: Copyright (c) 2007-2014 Intel Corporation.
  219. [ 4.024666] pegasus: Pegasus/Pegasus II USB Ethernet driver
  220. [ 4.030391] usbcore: registered new interface driver pegasus
  221. [ 4.036150] usbcore: registered new interface driver asix
  222. [ 4.041681] usbcore: registered new interface driver ax88179_178a
  223. [ 4.047856] usbcore: registered new interface driver cdc_ether
  224. [ 4.053829] usbcore: registered new interface driver smsc75xx
  225. [ 4.059713] usbcore: registered new interface driver smsc95xx
  226. [ 4.065537] usbcore: registered new interface driver net1080
  227. [ 4.071341] usbcore: registered new interface driver cdc_subset
  228. [ 4.077341] usbcore: registered new interface driver zaurus
  229. [ 4.083105] usbcore: registered new interface driver cdc_ncm
  230. [ 4.095970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  231. [ 4.102565] ehci-pci: EHCI PCI platform driver
  232. [ 4.107103] ehci-platform: EHCI generic platform driver
  233. [ 4.112936] ehci-omap: OMAP-EHCI Host Controller driver
  234. [ 4.118588] ehci-orion: EHCI orion driver
  235. [ 4.123034] SPEAr-ehci: EHCI SPEAr driver
  236. [ 4.127413] ehci-st: EHCI STMicroelectronics driver
  237. [ 4.132711] ehci-atmel: EHCI Atmel driver
  238. [ 4.137077] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  239. [ 4.143357] ohci-pci: OHCI PCI platform driver
  240. [ 4.147906] ohci-platform: OHCI generic platform driver
  241. [ 4.153684] SPEAr-ohci: OHCI SPEAr driver
  242. [ 4.158069] ohci-st: OHCI STMicroelectronics driver
  243. [ 4.163378] ohci-atmel: OHCI Atmel driver
  244. [ 4.169033] usbcore: registered new interface driver usb-storage
  245. [ 4.190801] i2c_dev: i2c /dev entries driver
  246. [ 4.239394] sdhci: Secure Digital Host Controller Interface driver
  247. [ 4.245599] sdhci: Copyright(c) Pierre Ossman
  248. [ 4.255386] Synopsys Designware Multimedia Card Interface Driver
  249. [ 4.266303] sdhci-pltfm: SDHCI platform and OF driver helper
  250. [ 4.274694] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO
  251. [ 4.285009] ledtrig-cpu: registered to indicate activity on CPUs
  252. [ 4.294109] caam 2100000.crypto: Entropy delay = 3200
  253. [ 4.317376] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
  254. [ 4.360034] caam 2100000.crypto: Instantiated RNG4 SH0
  255. [ 4.361737] mmc0: new high speed SDHC card at address 59b4
  256. [ 4.372389] mmcblk0: mmc0:59b4 USDU1 29.4 GiB
  257. [ 4.381597] mmcblk0: p1 p2
  258. [ 4.420796] caam 2100000.crypto: Instantiated RNG4 SH1
  259. [ 4.425972] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4)
  260. [ 4.432649] caam 2100000.crypto: job rings = 2, qi = 0
  261. [ 4.449300] caam algorithms registered in /proc/crypto
  262. [ 4.454731] caam 2100000.crypto: registering rng-caam
  263. [ 4.481962] caam 2100000.crypto: rng crypto API alg registered prng-caam
  264. [ 4.492082] usbcore: registered new interface driver usbhid
  265. [ 4.497679] usbhid: USB HID core driver
  266. [ 4.519152] NET: Registered PF_INET6 protocol family
  267. [ 4.526383] Segment Routing with IPv6
  268. [ 4.530231] In-situ OAM (IOAM) with IPv6
  269. [ 4.534320] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  270. [ 4.541458] NET: Registered PF_PACKET protocol family
  271. [ 4.546552] can: controller area network core
  272. [ 4.551114] NET: Registered PF_CAN protocol family
  273. [ 4.555927] can: raw protocol
  274. [ 4.558971] can: broadcast manager protocol
  275. [ 4.563187] can: netlink gateway - max_hops=1
  276. [ 4.568058] Key type dns_resolver registered
  277. [ 4.574575] ThumbEE CPU extension supported.
  278. [ 4.578923] Registering SWP/SWPB emulation handler
  279. [ 4.585078] Loading compiled-in X.509 certificates
  280. [ 4.663975] random: crng init done
  281. [ 4.683014] ci_hdrc ci_hdrc.1: EHCI Host Controller
  282. [ 4.687959] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  283. [ 4.718438] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  284. [ 4.725259] hub 1-0:1.0: USB hub found
  285. [ 4.729155] hub 1-0:1.0: 1 port detected
  286. [ 4.761669] imx-uart 21ec000.serial: deferred probe timeout, ignoring dependency
  287. [ 4.775847] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  288. [ 4.795074] imx-uart 21ec000.serial: deferred probe timeout, ignoring dependency
  289.  
  290.  
  291.  
  292. [ 113.109424] VFS: Unable to mount root fs via NFS.
  293. [ 113.114243] devtmpfs: mounted
  294. [ 113.124787] Freeing unused kernel image (initmem) memory: 2048K
  295. [ 113.159503] Run /sbin/init as init process
  296. [ 113.164065] Run /etc/init as init process
  297. [ 113.168295] Run /bin/init as init process
  298. [ 113.172581] Run /bin/sh as init process
  299. [ 113.176618] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
  300. [ 113.190817] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc6 #1
  301. [ 113.197113] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  302. [ 113.203669] unwind_backtrace from show_stack+0x10/0x14
  303. [ 113.208951] show_stack from dump_stack_lvl+0x40/0x4c
  304. [ 113.214044] dump_stack_lvl from panic+0x100/0x330
  305. [ 113.218885] panic from kernel_init+0x128/0x12c
  306. [ 113.223465] kernel_init from ret_from_fork+0x14/0x2c
  307. [ 113.228549] Exception stack(0xf083dfb0 to 0xf083dff8)
  308. [ 113.233625] dfa0: 00000000 00000000 00000000 00000000
  309. [ 113.241824] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  310. [ 113.250021] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
  311. [ 113.256663] CPU2: stopping
  312. [ 113.259392] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.19.0-rc6 #1
  313. [ 113.265687] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  314. [ 113.272231] unwind_backtrace from show_stack+0x10/0x14
  315. [ 113.277501] show_stack from dump_stack_lvl+0x40/0x4c
  316. [ 113.282582] dump_stack_lvl from do_handle_IPI+0x2c4/0x2fc
  317. [ 113.288101] do_handle_IPI from ipi_handler+0x18/0x20
  318. [ 113.293182] ipi_handler from handle_percpu_devid_irq+0x8c/0x1e0
  319. [ 113.299225] handle_percpu_devid_irq from generic_handle_domain_irq+0x28/0x38
  320. [ 113.306403] generic_handle_domain_irq from gic_handle_irq+0x88/0xa8
  321. [ 113.312805] gic_handle_irq from generic_handle_arch_irq+0x34/0x44
  322. [ 113.319021] generic_handle_arch_irq from call_with_stack+0x18/0x20
  323. [ 113.325323] call_with_stack from __irq_svc+0x98/0xb0
  324. [ 113.330398] Exception stack(0xf0875f18 to 0xf0875f60)
  325. [ 113.335468] 5f00: 00000000 00000001
  326. [ 113.343668] 5f20: 00000dc9 00000060 00000001 c1b0caf8 59da10bd ef7b7730 00000001 0000001a
  327. [ 113.351866] 5f40: 00000001 0000001a 00000000 f0875f68 c0e3e1c0 c0e3e288 60000013 ffffffff
  328. [ 113.360056] __irq_svc from cpuidle_enter_state+0x268/0x418
  329. [ 113.365671] cpuidle_enter_state from cpuidle_enter+0x50/0x54
  330. [ 113.371446] cpuidle_enter from do_idle+0x1e0/0x298
  331. [ 113.376368] do_idle from cpu_startup_entry+0x18/0x1c
  332. [ 113.381454] cpu_startup_entry from secondary_start_kernel+0x118/0x120
  333. [ 113.388019] secondary_start_kernel from 0x103017e0
  334. [ 113.392927] CPU0: stopping
  335. [ 113.395656] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc6 #1
  336. [ 113.401952] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  337. [ 113.408495] unwind_backtrace from show_stack+0x10/0x14
  338. [ 113.413766] show_stack from dump_stack_lvl+0x40/0x4c
  339. [ 113.418849] dump_stack_lvl from do_handle_IPI+0x2c4/0x2fc
  340. [ 113.424364] do_handle_IPI from ipi_handler+0x18/0x20
  341. [ 113.429445] ipi_handler from handle_percpu_devid_irq+0x8c/0x1e0
  342. [ 113.435480] handle_percpu_devid_irq from generic_handle_domain_irq+0x28/0x38
  343. [ 113.442648] generic_handle_domain_irq from gic_handle_irq+0x88/0xa8
  344. [ 113.449041] gic_handle_irq from generic_handle_arch_irq+0x34/0x44
  345. [ 113.455257] generic_handle_arch_irq from __irq_svc+0x88/0xb0
  346. [ 113.461031] Exception stack(0xc1b01ec8 to 0xc1b01f10)
  347. [ 113.466106] 1ec0: 00000000 00000001 00000dca 00000060 00000001 c1b0caf8
  348. [ 113.474306] 1ee0: 5e214ba5 ef795730 00000001 0000001a 00000001 0000001a 000286b7 c1b01f18
  349. [ 113.482501] 1f00: c0e3e1c0 c0e3e288 60000013 ffffffff
  350. [ 113.487564] __irq_svc from cpuidle_enter_state+0x268/0x418
  351. [ 113.493170] cpuidle_enter_state from cpuidle_enter+0x50/0x54
  352. [ 113.498946] cpuidle_enter from do_idle+0x1e0/0x298
  353. [ 113.503858] do_idle from cpu_startup_entry+0x18/0x1c
  354. [ 113.508942] cpu_startup_entry from rest_init+0xa8/0xac
  355. [ 113.514202] rest_init from arch_post_acpi_subsys_init+0x0/0x8
  356. [ 113.520076] CPU3: stopping
  357. [ 113.522803] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.19.0-rc6 #1
  358. [ 113.529099] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  359. [ 113.535642] unwind_backtrace from show_stack+0x10/0x14
  360. [ 113.540910] show_stack from dump_stack_lvl+0x40/0x4c
  361. [ 113.545991] dump_stack_lvl from do_handle_IPI+0x2c4/0x2fc
  362. [ 113.551508] do_handle_IPI from ipi_handler+0x18/0x20
  363. [ 113.556587] ipi_handler from handle_percpu_devid_irq+0x8c/0x1e0
  364. [ 113.562623] handle_percpu_devid_irq from generic_handle_domain_irq+0x28/0x38
  365. [ 113.569792] generic_handle_domain_irq from gic_handle_irq+0x88/0xa8
  366. [ 113.576184] gic_handle_irq from generic_handle_arch_irq+0x34/0x44
  367. [ 113.582399] generic_handle_arch_irq from call_with_stack+0x18/0x20
  368. [ 113.588697] call_with_stack from __irq_svc+0x98/0xb0
  369. [ 113.593771] Exception stack(0xf0879f18 to 0xf0879f60)
  370. [ 113.598842] 9f00: 00000000 00000001
  371. [ 113.607041] 9f20: 00000dcb 00000060 00000001 c1b0caf8 5e21490a ef7c8730 00000001 0000001a
  372. [ 113.615241] 9f40: 00000001 0000001a 000285d0 f0879f68 c0e3e1c0 c0e3e288 60000013 ffffffff
  373. [ 113.623430] __irq_svc from cpuidle_enter_state+0x268/0x418
  374. [ 113.629035] cpuidle_enter_state from cpuidle_enter+0x50/0x54
  375. [ 113.634811] cpuidle_enter from do_idle+0x1e0/0x298
  376. [ 113.639725] do_idle from cpu_startup_entry+0x18/0x1c
  377. [ 113.644808] cpu_startup_entry from secondary_start_kernel+0x118/0x120
  378. [ 113.651371] secondary_start_kernel from 0x103017e0
  379. [ 113.656290] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]---
  380.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!