BMDA v2.0.0-rc1 scans RP2040 via JLinkV9

$ ./build-gcc12/blackmagic -tv 53 -f 12M -s 000069658920
Black Magic Debug App v2.0.0-rc1-14-gb6ebf268
 for Black Magic Probe, ST-Link v2 and v3, CMSIS-DAP, J-Link and FTDI (MPSSE)
Using 1366:0101 000069658920 SEGGER
 J-Link ---
 request: e8
response: bf 7b ff b9
 request: ed
response: bf 7b ff b9 0d 7c b1 4f b1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Extended capabilities: 0xb9ff7bbf 0x4fb17c0d 0x000000b1 0x00000000
 request: 01
response: 70 00
response: 4a 2d 4c 69 6e 6b 20 56 39 20 63 6f 6d 70 69 6c 65 64 20 4d 61 79 20 20 37 20 32 30 32 31 20 31 ...
Firmware version: J-Link V9 compiled May  7 2021 16:26:12
Copyright 2003-2012 SEGGER: www.segger.com
 request: f0
response: 00 77 01 00
Hardware version: J-Link v9.60.0
 request: c7 ff
response: 7b 00 00 00
 request: c7 fe
response: 01 00 00 00
Available interfaces:
        0: JTAG
        1: SWD*
        3: FINE  (Not supported)
        4: PIC32 2-wire JTAG  (Not supported)
        5: SPI  (Not supported)
        6: C2  (Not supported)
 request: dd
Running in Test Mode
 request: 07
response: e2 0c 00 00 00 01 01 01
Target voltage:  3.298V
 request: c7 fe
response: 01 00 00 00
 request: c7 fe
response: 01 00 00 00
 request: c0
response: 00 1b b7 00 01 00
SWD interface frequency:
        Base frequency: 12000000Hz
        Minimum divisor: 1
 request: 05 e0 2e
Speed set to 12.000MHz for SWD
-> jlink_swd_init(0)
 request: c7 fe
response: 01 00 00 00
jlink_swd_seq_out 32 clock_cycles: ffffffff
 request: cf 00 20 00 ff ff ff ff ff ff ff ff
response: ff ff ff 00 00
jlink_swd_seq_out 28 clock_cycles: 0fffffff
 request: cf 00 1c 00 ff ff ff ff ff ff ff 0f
response: ff ff ff 0f 00
Switching from JTAG to dormant
jlink_swd_seq_out 5 clock_cycles: 0000001f
 request: cf 00 05 00 ff 1f
response: 1f 00
jlink_swd_seq_out 31 clock_cycles: 33bbbbba
 request: cf 00 1f 00 ff ff ff ff ba bb bb 33
response: ff ff ff 33 00
jlink_swd_seq_out 8 clock_cycles: 000000ff
 request: cf 00 08 00 ff ff
response: 00 00
Switching out of dormant state into SWD
jlink_swd_seq_out 32 clock_cycles: 6209f392
 request: cf 00 20 00 ff ff ff ff 92 f3 09 62
response: ff ff ff 00 00
jlink_swd_seq_out 32 clock_cycles: 86852d95
 request: cf 00 20 00 ff ff ff ff 95 2d 85 86
response: ff ff ff 00 00
jlink_swd_seq_out 32 clock_cycles: e3ddafe9
 request: cf 00 20 00 ff ff ff ff e9 af dd e3
response: ff ff ff 00 00
jlink_swd_seq_out 32 clock_cycles: 19bc0ea2
 request: cf 00 20 00 ff ff ff ff a2 0e bc 19
response: ff ff ff 00 00
jlink_swd_seq_out 12 clock_cycles: 000001a0
 request: cf 00 0c 00 ff ff a0 01
response: ff 01 00
jlink_swd_seq_out 32 clock_cycles: ffffffff
 request: cf 00 20 00 ff ff ff ff ff ff ff ff
response: ff ff ff 00 00
jlink_swd_seq_out 32 clock_cycles: 0fffffff
 request: cf 00 20 00 ff ff ff ff ff ff ff 0f
response: ff ff ff 00 00
 request: cf 00 0b 00 ff f0 a5 00
response: ff 01 00
 request: cf 00 23 00 00 00 00 00 fe 00 00 00 00 00
response: ef 48 83 17 00 00
jlink_adiv5_raw_read_no_check 0000 -> 178348ef OK
jlink_adiv5_raw_access: Attempting access to addr 0008
 request: cf 00 0d 00 ff f0 b1 00
response: ff 01 00
 request: cf 00 29 00 ff ff ff ff ff 01 02 00 00 00 01 00
response: ff ff ff ff ff 00 00
jlink_adiv5_raw_access: addr 0008 <- 00000002
jlink_adiv5_raw_access: Attempting access to addr 0004
 request: cf 00 0b 00 ff f0 8d 00
response: ff 01 00
 request: cf 00 23 00 00 00 00 00 fe 00 00 00 00 00
response: 4f 53 00 03 00 00
SWD access resulted in parity error
Unhandled exception: SWD parity error
fish: Job 1, './build-gcc12/blackmagic -tv 53…' terminated by signal SIGABRT (Abort)