[06:29:04][I][logger:351]: Log initialized
[06:29:04][C][ota:473]: There have been 0 suspected unsuccessful boot attempts.
[06:29:04][D][esp32.preferences:114]: Saving 1 preferences to flash...
[06:29:04][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[06:29:04][I][app:029]: Running through setup()...
[06:29:04][I][i2c.arduino:183]: Performing I2C bus recovery
[06:29:04][C][ina2xx:016]: Setting up INA2xx...
[06:29:04][D][ina2xx:212]: Reset
[06:29:04][D][ina2xx:510]: read_unsigned_16_ 0x3E, ret= OK, val=0x5449
[06:29:04][D][ina2xx:510]: read_unsigned_16_ 0x3F, ret= OK, val=0x2281
[06:29:04][I][ina2xx:229]: Manufacturer: 0x5449, Device ID: 0x0228, Revision: 1
[06:29:04][I][ina2xx:238]: Supported device found: INA228, 85-V, 20-Bit, Ultra-Precise Power/Energy/Charge Monitor
[06:29:04][D][ina2xx:275]: Setting ADCRANGE = 1
[06:29:04][D][ina2xx:510]: read_unsigned_16_ 0x00, ret= OK, val=0x0000
[06:29:04][D][ina2xx:307]: Given Rshunt=0.001110 Ohm and Max_current=40.000
[06:29:04][D][ina2xx:308]: New CURRENT_LSB=0.000076, SHUNT_CAL=4440
[06:29:04][D][ina2xx:050]: Updating
[06:29:04][D][ina2xx:052]: Initiating new data collection
[06:29:04][D][ina2xx:501]: read_unsigned_ reg=0x04, ret=OK, len=3, val=0x5AC0
[06:29:04][D][ina2xx:341]: read_shunt_voltage_mv_ ret=OK, shunt_cal=4440, reading_lsb=1452.000000
[06:29:04][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.11344 mV with 5 decimals of accuracy
[06:29:04][D][ina2xx:501]: read_unsigned_ reg=0x05, ret=OK, len=3, val=0xC65C0
[06:29:04][D][ina2xx:362]: read_bus_voltage_ ret=OK, reading_lsb=50780.000000
[06:29:04][D][sensor:094]: 'INA228 Bus Voltage': Sending state 9.91797 V with 5 decimals of accuracy
[06:29:04][D][ina2xx:510]: read_unsigned_16_ 0x06, ret= OK, val=0x0B4D
[06:29:04][D][ina2xx:382]: read_die_temp_c_ ret=OK, reading_lsb=2893.000000
[06:29:04][D][sensor:094]: 'INA228 DIE Temperature': Sending state 22.60156 °C with 5 decimals of accuracy
[06:29:04][D][ina2xx:501]: read_unsigned_ reg=0x07, ret=OK, len=3, val=0x5210
[06:29:04][D][ina2xx:398]: read_current_a_ ret=OK. current_lsb=0.000076. reading_lsb=1313.000000
[06:29:04][D][sensor:094]: 'INA228 Current': Sending state 0.10017 A with 8 decimals of accuracy
[06:29:04][D][ina2xx:501]: read_unsigned_ reg=0x08, ret=OK, len=3, val=0xFF1
[06:29:04][D][ina2xx:412]: read_power_w_ ret=OK, reading_lsb=4081
[06:29:04][D][sensor:094]: 'INA228 Power': Sending state 0.99634 W with 6 decimals of accuracy
[06:29:04][D][ina2xx:510]: read_unsigned_16_ 0x0B, ret= OK, val=0x0003
[06:29:04][D][ina2xx:468]: read_diagnostics_and_act_ ret=OK, 0x0003
[06:29:04][D][ina2xx:501]: read_unsigned_ reg=0x09, ret=OK, len=5, val=0x4B
[06:29:04][D][ina2xx:432]: read_energy_j_ ret=OK, reading_lsb=0x4B, current_lsb=0.000076, overflow_cnt=0
[06:29:04][D][sensor:094]: 'INA228 Energy': Sending state 0.29297 J with 8 decimals of accuracy
[06:29:04][D][ina2xx:501]: read_unsigned_ reg=0x0A, ret=OK, len=5, val=0x1AA
[06:29:04][D][ina2xx:454]: read_charge_c_ ret=1, curr_charge=426.000000 + 39-bit overflow_cnt=0
[06:29:04][D][sensor:094]: 'INA228 Charge': Sending state 0.03250 C with 8 decimals of accuracy
[06:29:06][D][ina2xx:050]: Updating
[06:29:06][D][ina2xx:052]: Initiating new data collection
[06:29:06][D][ina2xx:501]: read_unsigned_ reg=0x04, ret=OK, len=3, val=0x5B00
[06:29:06][D][ina2xx:341]: read_shunt_voltage_mv_ ret=OK, shunt_cal=4440, reading_lsb=1456.000000
[06:29:06][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.11375 mV with 5 decimals of accuracy
[06:29:06][D][ina2xx:501]: read_unsigned_ reg=0x05, ret=OK, len=3, val=0xC6520
[06:29:06][D][ina2xx:362]: read_bus_voltage_ ret=OK, reading_lsb=50770.000000
[06:29:06][D][sensor:094]: 'INA228 Bus Voltage': Sending state 9.91602 V with 5 decimals of accuracy
[06:29:06][D][ina2xx:510]: read_unsigned_16_ 0x06, ret= OK, val=0x0B4D
[06:29:06][D][ina2xx:382]: read_die_temp_c_ ret=OK, reading_lsb=2893.000000
[06:29:06][D][sensor:094]: 'INA228 DIE Temperature': Sending state 22.60156 °C with 5 decimals of accuracy
[06:29:06][D][ina2xx:501]: read_unsigned_ reg=0x07, ret=OK, len=3, val=0x50F0
[06:29:06][D][ina2xx:398]: read_current_a_ ret=OK. current_lsb=0.000076. reading_lsb=1295.000000
[06:29:06][D][sensor:094]: 'INA228 Current': Sending state 0.09880 A with 8 decimals of accuracy
[06:29:06][D][ina2xx:501]: read_unsigned_ reg=0x08, ret=OK, len=3, val=0xF7E
[06:29:06][D][ina2xx:412]: read_power_w_ ret=OK, reading_lsb=3966
[06:29:06][D][sensor:094]: 'INA228 Power': Sending state 0.96826 W with 6 decimals of accuracy
[06:29:06][D][ina2xx:510]: read_unsigned_16_ 0x0B, ret= OK, val=0x0003
[06:29:06][D][ina2xx:468]: read_diagnostics_and_act_ ret=OK, 0x0003
[06:29:06][D][ina2xx:501]: read_unsigned_ reg=0x09, ret=OK, len=5, val=0x1DD
[06:29:06][D][ina2xx:432]: read_energy_j_ ret=OK, reading_lsb=0x1DD, current_lsb=0.000076, overflow_cnt=0
[06:29:06][D][sensor:094]: 'INA228 Energy': Sending state 1.86328 J with 8 decimals of accuracy
[06:29:06][D][ina2xx:501]: read_unsigned_ reg=0x0A, ret=OK, len=5, val=0x9D1
[06:29:06][D][ina2xx:454]: read_charge_c_ ret=1, curr_charge=2513.000000 + 39-bit overflow_cnt=0
[06:29:06][D][sensor:094]: 'INA228 Charge': Sending state 0.19173 C with 8 decimals of accuracy
[06:29:08][D][ina2xx:050]: Updating
[06:29:08][D][ina2xx:052]: Initiating new data collection
[06:29:08][D][ina2xx:501]: read_unsigned_ reg=0x04, ret=OK, len=3, val=0x5680
[06:29:08][D][ina2xx:341]: read_shunt_voltage_mv_ ret=OK, shunt_cal=4440, reading_lsb=1384.000000
[06:29:08][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.10813 mV with 5 decimals of accuracy
[06:29:08][D][ina2xx:501]: read_unsigned_ reg=0x05, ret=OK, len=3, val=0xC6590
[06:29:08][D][ina2xx:362]: read_bus_voltage_ ret=OK, reading_lsb=50777.000000
[06:29:08][D][sensor:094]: 'INA228 Bus Voltage': Sending state 9.91738 V with 5 decimals of accuracy
[06:29:08][D][ina2xx:510]: read_unsigned_16_ 0x06, ret= OK, val=0x0B4C
[06:29:08][D][ina2xx:382]: read_die_temp_c_ ret=OK, reading_lsb=2892.000000
[06:29:08][D][sensor:094]: 'INA228 DIE Temperature': Sending state 22.59375 °C with 5 decimals of accuracy
[06:29:08][D][ina2xx:501]: read_unsigned_ reg=0x07, ret=OK, len=3, val=0x5210
[06:29:08][D][ina2xx:398]: read_current_a_ ret=OK. current_lsb=0.000076. reading_lsb=1313.000000
[06:29:08][D][sensor:094]: 'INA228 Current': Sending state 0.10017 A with 8 decimals of accuracy
[06:29:08][D][ina2xx:501]: read_unsigned_ reg=0x08, ret=OK, len=3, val=0xFC2
[06:29:08][D][ina2xx:412]: read_power_w_ ret=OK, reading_lsb=4034
[06:29:08][D][sensor:094]: 'INA228 Power': Sending state 0.98486 W with 6 decimals of accuracy
[06:29:08][D][ina2xx:510]: read_unsigned_16_ 0x0B, ret= OK, val=0x0003
[06:29:08][D][ina2xx:468]: read_diagnostics_and_act_ ret=OK, 0x0003
[06:29:08][D][ina2xx:501]: read_unsigned_ reg=0x09, ret=OK, len=5, val=0x3D7
[06:29:08][D][ina2xx:432]: read_energy_j_ ret=OK, reading_lsb=0x3D7, current_lsb=0.000076, overflow_cnt=0
[06:29:08][D][sensor:094]: 'INA228 Energy': Sending state 3.83984 J with 8 decimals of accuracy
[06:29:08][D][ina2xx:501]: read_unsigned_ reg=0x0A, ret=OK, len=5, val=0x1409
[06:29:08][D][ina2xx:454]: read_charge_c_ ret=1, curr_charge=5129.000000 + 39-bit overflow_cnt=0
[06:29:08][D][sensor:094]: 'INA228 Charge': Sending state 0.39131 C with 8 decimals of accuracy
[06:29:10][D][ina2xx:050]: Updating
[06:29:10][D][ina2xx:052]: Initiating new data collection
[06:29:10][D][ina2xx:501]: read_unsigned_ reg=0x04, ret=OK, len=3, val=0x5840
[06:29:10][D][ina2xx:341]: read_shunt_voltage_mv_ ret=OK, shunt_cal=4440, reading_lsb=1412.000000
[06:29:10][D][sensor:094]: 'INA228 Shunt Voltage': Sending state 0.11031 mV with 5 decimals of accuracy
[06:29:10][D][ina2xx:501]: read_unsigned_ reg=0x05, ret=OK, len=3, val=0xC6570
[06:29:10][D][ina2xx:362]: read_bus_voltage_ ret=OK, reading_lsb=50775.000000
[06:29:10][D][sensor:094]: 'INA228 Bus Voltage': Sending state 9.91699 V with 5 decimals of accuracy
[06:29:10][D][ina2xx:510]: read_unsigned_16_ 0x06, ret= OK, val=0x0B4C
[06:29:10][D][ina2xx:382]: read_die_temp_c_ ret=OK, reading_lsb=2892.000000
[06:29:10][D][sensor:094]: 'INA228 DIE Temperature': Sending state 22.59375 °C with 5 decimals of accuracy
[06:29:10][D][ina2xx:501]: read_unsigned_ reg=0x07, ret=OK, len=3, val=0x5290
[06:29:10][D][ina2xx:398]: read_current_a_ ret=OK. current_lsb=0.000076. reading_lsb=1321.000000
[06:29:10][D][sensor:094]: 'INA228 Current': Sending state 0.10078 A with 8 decimals of accuracy
[06:29:10][D][ina2xx:501]: read_unsigned_ reg=0x08, ret=OK, len=3, val=0xFAD
[06:29:10][D][ina2xx:412]: read_power_w_ ret=OK, reading_lsb=4013
[06:29:10][D][sensor:094]: 'INA228 Power': Sending state 0.97974 W with 6 decimals of accuracy
[06:29:10][D][ina2xx:510]: read_unsigned_16_ 0x0B, ret= OK, val=0x0003
[06:29:10][D][ina2xx:468]: read_diagnostics_and_act_ ret=OK, 0x0003
[06:29:10][D][ina2xx:501]: read_unsigned_ reg=0x09, ret=OK, len=5, val=0x5CF
[06:29:10][D][ina2xx:432]: read_energy_j_ ret=OK, reading_lsb=0x5CF, current_lsb=0.000076, overflow_cnt=0
[06:29:10][D][sensor:094]: 'INA228 Energy': Sending state 5.80859 J with 8 decimals of accuracy
[06:29:10][D][ina2xx:501]: read_unsigned_ reg=0x0A, ret=OK, len=5, val=0x1E44
[06:29:10][D][ina2xx:454]: read_charge_c_ ret=1, curr_charge=7748.000000 + 39-bit overflow_cnt=0
[06:29:10][D][sensor:094]: 'INA228 Charge': Sending state 0.59113 C with 8 decimals of accuracy