send http to wan2

this works only if you have two wan ports on MIKROTIK (WAN1, WAN2), WAN1 is default route in our scenario, WAN2 will be used for HTTP traffic which will be coming from local computers.


send only http "port80"

/ip firewall mangle
add chain=prerouting action=mark-routing new-routing-mark=web_traffic passthrough=no protocol=tcp dst-address-type=!local in-interface=LAN dst-port=80

/ip route
add comment="port80" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=WAN2 routing-mark=web_traffic scope=30 target-scope=10

/ip firewall nat
add action=masquerade chain=srcnat disabled=no out-interface=WAN2



send only https "port 443"

/ip firewall mangle
add chain=prerouting action=mark-routing new-routing-mark=web_traffic passthrough=no protocol=tcp dst-address-type=!local in-interface=LAN dst-port=443

/ip route
add comment="port443" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=WAN2 routing-mark=web_traffic scope=30 target-scope=10

/ip firewall nat
add action=masquerade chain=srcnat disabled=no out-interface=WAN2




send  http & https"port 80 &  port 443"

/ip firewall mangle
add chain=prerouting action=mark-routing new-routing-mark=web_traffic passthrough=no protocol=tcp dst-address-type=!local in-interface=LAN dst-port=80,443

/ip route
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=WAN2 routing-mark=web_traffic scope=30 target-scope=10

/ip firewall nat
add action=masquerade chain=srcnat disabled=no out-interface=WAN2