Ultrasonic Update rev_01

/********* Pleasedontcode.com **********

    Pleasedontcode thanks you for automatic code generation! Enjoy your code!

    - Terms and Conditions:
    You have a non-exclusive, revocable, worldwide, royalty-free license
    for personal and commercial use. Attribution is optional; modifications
    are allowed, but you're responsible for code maintenance. We're not
    liable for any loss or damage. For full terms,
    please visit pleasedontcode.com/termsandconditions.

    - Project: Ultrasonic Update
    - Source Code NOT compiled for: Arduino Uno
    - Source Code created on: 2024-05-14 11:09:23

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
    /* An Arduino Uno is programmed to accept inputs from */
    /* sensors, process the data and produce an output */
    /* that is sent to the output devices in form of */
    /* signals that in turn switch on or off the pump at */
    /* threshold and maximum values defined. */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Ultrasonic.h> // https://github.com/ErickSimoes/Ultrasonic

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void updateOutputs(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t ultrasonic_HC_SR04_Echo_PIN_D3 = 3;

/***** DEFINITION OF DIGITAL OUTPUT PINS *****/
const uint8_t ultrasonic_HC_SR04_Trigger_PIN_D2 = 2;

/***** DEFINITION OF OUTPUT RAW VARIABLES *****/
/***** used to store raw data *****/
bool ultrasonic_HC_SR04_Trigger_PIN_D2_rawData = 0;

/***** DEFINITION OF OUTPUT PHYSICAL VARIABLES *****/
/***** used to store data after characteristic curve transformation *****/
float ultrasonic_HC_SR04_Trigger_PIN_D2_phyData = 0.0;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
Ultrasonic ultrasonic(ultrasonic_HC_SR04_Trigger_PIN_D2, ultrasonic_HC_SR04_Echo_PIN_D3);

void setup(void)
{
    // put your setup code here, to run once:
    pinMode(ultrasonic_HC_SR04_Echo_PIN_D3, INPUT);
    pinMode(ultrasonic_HC_SR04_Trigger_PIN_D2, OUTPUT);
}

void loop(void)
{
    // put your main code here, to run repeatedly:
    updateOutputs(); // Refresh output data
}

void updateOutputs()
{
    digitalWrite(ultrasonic_HC_SR04_Trigger_PIN_D2, ultrasonic_HC_SR04_Trigger_PIN_D2_rawData);
}

/* END CODE */